Premier Vac Attack keeps your dental evacuation system clean and efficient. Get expert tips for safe, effective daily use and maintenance.
Protecting your dental vacuum pump is about more than the initial investment; it's about preventing costly, practice-stopping failures. Using the wrong cleaner can cause serious damage, leading to corrosion, scale buildup, and harmful foaming that degrades components over time. A non-corrosive, non-foaming solution isn't just a good idea—it's essential for long-term care. Premier Vac Attack is specifically formulated to be tough on debris but gentle on your equipment. Integrating this cleaner into your daily routine safeguards your vacuum system, ensuring it performs as reliably as your trusted Pro Series instruments.
Premier Vac Attak™ is a high-performance powder concentrate specifically engineered to clean and deodorize your dental evacuation system. Think of it as a deep clean for the lifelines of your practice. Every day, your suction lines work hard to remove saliva, blood, and debris, but this can lead to a buildup of bio-burden that compromises suction performance and creates odors. Vac Attak is formulated to dissolve this accumulated debris, ensuring your evacuation system runs smoothly and efficiently. It’s an essential part of any clinic’s infection control and equipment maintenance protocol.
When it comes to maintaining the efficiency and longevity of your dental vacuum pump, Premier Vac Attak™ stands out as a market-leading solution. This powerful cleaner is specifically formulated to tackle stubborn debris in your evacuation lines, like prophy paste and gels. Its non-foaming, non-corrosive formula eliminates buildup without compromising your vacuum system’s components, preventing rust and mineral deposits that can cause damage. Incorporating it into your daily routine is a proactive measure that supports your clinic's infection control standards while ensuring your equipment performs reliably. With just one 800g jar providing up to 100 uses, it’s an economical way to eliminate odors and prevent costly repairs, keeping your practice running smoothly.
The secret to Vac Attak’s effectiveness is its unique, fast-acting formula that uses organic chlorine to break down contaminants. Unlike harsh chemicals that can damage your equipment, this specialized ingredient targets the protein chains found in organic debris and germs. It systematically dismantles them into simple, harmless, and water-soluble amino acids. Once broken down, this residue is easily flushed out of the evacuation lines with water, leaving the system clean and clear. This chemical action is not only powerful but also ensures a thorough cleaning from the chair to the central vacuum pump, without leaving any harmful byproducts behind.
One of the biggest challenges in maintaining evacuation lines is dealing with stubborn materials that traditional enzymatic cleaners can’t always handle. Vac Attak is specifically formulated to outperform these cleaners by powerfully dissolving tough substances like prophy paste, fluoride gels, and other viscous materials that can quickly cause blockages. This stubborn bio-burden is a leading cause of reduced suction and equipment failure. By incorporating Vac Attak into your daily routine, you can prevent these frustrating clogs before they start, ensuring consistent suction power and protecting the longevity of your vacuum system. It’s a proactive solution for a persistent clinical problem.
Your evacuation system is one of the hardest-working pieces of equipment in your practice, running constantly to ensure a clear and safe operating field. But over time, the daily stream of saliva, blood, and dental materials can create stubborn buildup in the lines. While it might be tempting to reach for a generic household cleaner, these products can damage your equipment and fail to break down the specific debris found in a dental setting. Using a cleaner formulated specifically for evacuation systems isn't just about keeping things tidy; it's a critical step in your overall infection control protocol.
A specialized cleaner is designed to dissolve the unique combination of organic and inorganic materials that accumulate in your vacuum lines. Unlike harsh chemicals that can corrode metal parts, crack plastic tubing, and harm your vacuum pump, a professional-grade solution works safely and effectively. Regular use prevents the gradual loss of suction that compromises procedures and avoids the sudden, practice-halting clogs that always seem to happen at the worst possible time. Investing in the right maintenance routine protects your equipment, ensures consistent performance, and maintains a hygienic environment for both your team and your patients.
The blockages in your evacuation lines are caused by more than just simple debris. The real culprits are the specific materials used in daily procedures that build up and harden over time. Think about the gritty prophy paste from cleanings, viscous fluoride gels, and impression materials like our AlgiMac alginate. When combined with organic matter like blood, saliva, and tissue fragments, these substances create a thick, cement-like sludge. This bio-burden not only restricts airflow and reduces suction power but can also lead to complete system failure if not addressed. A specialized cleaner is formulated to break down these exact materials, dissolving the protein chains and sticky residues that generic cleaners leave behind.
Neglecting your evacuation system with improper cleaning habits can lead to significant hidden costs that go far beyond a simple clog. When lines are constricted, your vacuum pump has to work harder, leading to increased wear and tear and eventual costly repairs or a full replacement. The resulting downtime disrupts your schedule and leads to lost production. Furthermore, weak suction directly impacts the quality of your clinical work by failing to maintain a clear, dry field. This not only creates a frustrating experience for you but can also compromise the outcome of the procedure. A cleaner like Vac Attak™ is a smart investment, helping to extend the life of your equipment and prevent these expensive and disruptive problems from happening in the first place.
When choosing a cleaner for your evacuation system, not all formulas are created equal. The right choice does more than just clean; it protects your equipment, ensures consistent performance, and provides excellent value for your practice. Premier Vac Attack stands out from the competition by addressing the most common pain points associated with evacuation line maintenance. Its specialized formula is engineered to deliver powerful cleaning action without the damaging side effects of lesser-quality solutions that can disrupt your workflow and lead to expensive repairs down the line.
Many cleaners on the market rely on harsh chemicals that can corrode metal parts or foaming agents that reduce suction and can even damage your pump. This not only shortens the lifespan of your valuable dental equipment and supplies but also compromises the efficiency and safety of your procedures. Vac Attack was designed differently. It focuses on effectively breaking down bio-burden while being gentle on your system's delicate components. From its non-foaming properties that guarantee consistent suction to its cost-effective concentrated powder, every aspect of Vac Attack is built to support an efficient, safe, and productive clinical environment. Let’s look at exactly how it outperforms other options on the market.
Premier offers two excellent versions of its evacuation system cleaner, and the best one for your practice depends on your specific needs and priorities. Whether you need maximum power to tackle heavy-duty debris or prefer a non-toxic, eco-friendly solution, there’s a Vac Attak formula designed for you. Both are highly effective, but they work in different ways. Let's break down the differences so you can make an informed choice for your clinic's maintenance protocol and keep your dental equipment and supplies in top condition.
The original Vac Attak is the powerhouse of the duo. It’s a high-performance powder concentrate that uses a unique, fast-acting organic chlorine formula to clean and deodorize your system. This isn't your typical harsh bleach; the specialized ingredient is engineered to target the protein chains in organic debris and germs. It effectively dismantles this bio-burden into simple, water-soluble amino acids that can be easily flushed away. This makes it incredibly effective against the toughest materials, ensuring your lines stay clear and your suction remains powerful day after day. If your practice deals with a high volume of procedures that create stubborn residue, this formula provides the aggressive cleaning action you need.
For practices that prioritize a green or non-toxic approach, Vac Attak Green is the perfect solution. This formula swaps the organic chlorine for powerful enzymes that digest organic waste. With a neutral pH and a formulation free of chlorine and other harsh oxidizing agents, it's exceptionally gentle on your equipment. As a non-toxic and non-corrosive cleaner, it protects your pipes and vacuum pump from damage, much like how our lightweight Air Series instruments are designed for long-term, comfortable use without wear and tear. It's the ideal choice for maintaining your system's integrity while adhering to an eco-conscious maintenance protocol without creating foam or toxic byproducts.
Foam is the enemy of a properly functioning evacuation system. While it might look like it’s cleaning, foam actually decreases suction power by creating air pockets in the lines. This reduction in vacuum pressure can compromise fluid and debris removal during procedures, impacting clinical efficiency. Furthermore, some foaming cleaners can leave behind a residue that builds up over time. Vac Attack’s completely non-foaming formula ensures your system maintains maximum suction from the start of the cleaning cycle to the end. This allows the solution to flow freely, making full contact with the interior walls of the tubing to dissolve and flush away debris without impeding performance or risking damage to the pump.
Your evacuation system is a significant investment, and protecting it is a top priority. Many generic cleaners contain harsh, corrosive agents that can slowly degrade the metal and plastic components of your lines and pump, leading to premature failure and costly repairs. Premier Vac Attack is specifically formulated to be non-corrosive, so it "won't rust metal parts" and is safe for all types of pumps. It also helps prevent the scale buildup that often occurs when using hard water. For practices prioritizing sustainability, Vac Attack GREEN offers an even gentler, eco-friendly alternative. Its neutral pH formula contains no chlorine or oxidizing agents, providing powerful cleaning action while aligning with your commitment to a safer clinical environment.
In a busy practice, managing supply costs without sacrificing quality is key. Premier Vac Attack delivers exceptional performance and outstanding value. Its concentrated powder formula is highly economical, with a single 800-gram jar providing more than 100 cleanings. This makes the cost-per-use significantly lower than many pre-mixed liquid solutions, which often contain mostly water and require more frequent reordering. By choosing a concentrated powder, you not only reduce your overall supply spending but also minimize storage space and packaging waste. This smart, efficient approach to maintenance allows your team to keep the evacuation system in peak condition while supporting your practice’s bottom line.
Using Premier Vac Attack correctly is the key to maintaining a clean, efficient, and odor-free evacuation system. While the process is straightforward, following a few best practices ensures you get the maximum benefit from its powerful formula. Proper daily cleaning is a fundamental part of your clinic's overall infection control protocol, protecting your equipment and creating a safer clinical environment. Think of it as an essential end-of-day task that prevents future headaches, like clogs and costly repairs. Below, we’ll walk through the exact steps for mixing, application, and flushing to make this process a seamless part of your routine.
Getting the right concentration is the first step to effective cleaning. Simply mix one scoop (approximately 28 grams) of Vac Attack powder with 32 ounces of warm tap water. Using warm water helps the powder dissolve completely and quickly, activating its organic chlorine formula for immediate action. Once mixed, aspirate the entire solution through your system, splitting it between the high-volume evacuator (HVE) and the saliva ejector. This ensures the cleaner coats all internal surfaces of the tubing, where bio-burden and debris accumulate throughout the day. The process is designed to be fast, taking only a few minutes to complete.
Consistency is crucial for evacuation system health. For routine care, flush your lines with a fresh solution of Vac Attack at the end of every clinical day. This daily protocol prevents the gradual buildup of prophy paste, impression materials, and organic debris, which can lead to clogs, reduced suction, and unpleasant odors. If you are just starting with Vac Attack or dealing with a heavily soiled system, a "shock treatment" may be necessary. This involves running the solution through the lines twice a day for several days to break down stubborn, long-standing deposits and restore flow before transitioning to a daily maintenance schedule.
To maximize cleaning power, your flushing technique matters. As you aspirate the Vac Attack solution, alternate between the HVE and saliva ejector lines. After the last of the liquid is drawn through, continue to aspirate air for a few seconds. This creates turbulence inside the tubing, which helps the solution scrub the interior walls more effectively. One of the key benefits of Vac Attack is that it is a non-foaming formula designed to be left in the lines overnight without rinsing. It continues working after you’ve gone home, ensuring your system is clean and ready for the next day, complementing your other sterilization procedures.
Integrating a dedicated evacuation system cleaner into your daily routine is one of the smartest moves you can make for your practice. It’s about more than just preventing the occasional clog; it’s a proactive strategy that protects your equipment, ensures consistent performance, and contributes to a cleaner clinical environment. When your suction lines are clear, procedures run smoother, and your team can focus on patient care without frustrating interruptions. Using a specialized cleaner like Premier Vac Attack is a foundational part of any modern infection control protocol, working behind the scenes to keep your practice running at its best. By making it a non-negotiable part of your end-of-day cleanup, you’re investing in efficiency, longevity, and the overall quality of your clinical setting.
We all know that prophy paste and fluoride gels are essential for preventive care, but they are also the primary culprits behind sluggish and clogged evacuation lines. Their thick, gritty consistency allows them to adhere to the inner walls of your tubing, creating a sticky residue that accumulates with each patient. Over time, this buildup narrows the lines, drastically reducing suction power and eventually leading to a complete blockage. Vac Attack is formulated to target these specific materials. Its powerful organic chlorine formula effectively dissolves and flushes away stubborn prophy paste and gel residues before they can harden, ensuring your lines remain clear and your suction stays strong all day long.
Your evacuation system is a critical piece of equipment, and protecting that investment should be a top priority. Routine cleaning with the wrong solution can cause more harm than good, leading to corrosion and premature failure. Premier Vac Attack is specifically designed to be tough on debris but gentle on your equipment. Its non-corrosive formula is safe for all metal parts, preventing the rust that can degrade pumps and fittings over time. Furthermore, it actively prevents scale buildup from hard water, another common issue that can impair pump function. By using a cleaner that protects your system from both organic and mineral buildup, you ensure consistent performance and extend the operational life of your entire unit.
The details of your clinical environment matter, and that includes ambient odors. A clean, fresh-smelling operatory enhances the experience for both your patients and your team. Evacuation lines can be a source of unpleasant smells, but Vac Attack helps eliminate them at the source. As it cleans, it deodorizes the entire system, leaving behind a subtle, fresh lemon scent. This small touch contributes to a more pleasant and professional atmosphere. The easy-to-use powder format makes daily cleaning simple, and with up to 80 cleanings per jar, it’s a cost-effective way to maintain a pristine clinical space. This focus on a clean environment perfectly complements your use of other hygiene essentials, like MacSafe protective supplies.
A well-functioning evacuation system is the unsung hero of a productive dental practice, but it’s also prone to frustrating and performance-draining issues. Over time, daily use leads to the accumulation of debris, scale, and corrosive damage that can reduce suction power and even cause costly equipment failures. Fortunately, these common problems are preventable with the right maintenance protocol. Using a specialized cleaner like Premier Vac Attack directly addresses the root causes of these issues, ensuring your system runs smoothly and reliably day after day.
Hard water deposits and harsh chemicals are silent threats to your evacuation system’s longevity. Over time, scale buildup can constrict lines and clog pumps, while corrosive agents can rust and degrade vital metal components. Vac Attack is specifically formulated to combat both problems. Its gentle, non-corrosive formula is safe for all types of pumps and metal parts, preventing rust and damage. It also actively stops hard water from forming scale, protecting your equipment from the inside out. This focus on preservation helps extend the life of your vacuum system, safeguarding your investment much like proper care protects your high-performance Pro Series instruments.
Foam is a major enemy of suction efficiency. When a cleaner foams, it can create air pockets in the lines that dramatically reduce suction power at the handpiece, disrupting procedures and frustrating both you and your patient. Worse, that foam can get pulled into the vacuum pump, leading to premature wear and expensive repairs. Vac Attack’s non-foaming formula ensures this never happens. It cleans thoroughly without creating any suds, guaranteeing consistent and powerful suction from the start of the day to the end. This reliability is a cornerstone of effective infection control and a smooth clinical workflow.
The daily buildup of bio-burden, prophy paste, and fluoride gels can create stubborn clogs that are difficult to remove. Vac Attack uses a powerful enzymatic formula to break down and dissolve this tough organic debris without relying on harsh or oxidizing chemicals. It’s strong enough to clear away even the most persistent materials, yet gentle enough for daily use with all amalgam separators. By effectively removing the source of blockages, you ensure your lines remain open and fully functional. Integrating this step into your routine complements your broader hygiene protocols, which include using MacSafe protective supplies to maintain a safe clinical environment.
When choosing a new product for your practice, hearing from colleagues who already use it can make all the difference. Across the dental community, Premier Vac Attack has earned a reputation for its reliability and efficiency. Professionals consistently highlight its powerful cleaning action, straightforward application, and excellent value. Here’s a closer look at what dentists and hygienists are saying about its performance in a real-world clinical setting.
Clinicians agree that Vac Attack delivers on its promise to keep evacuation systems running smoothly. Its formula is frequently praised for being "highly effective at removing all types of organic debris," ensuring lines remain clear and functional. The powerful enzymes are designed to break down stubborn materials that commonly cause blockages, including bio-burden, prophy paste, and fluoride gels. This thorough cleaning action is essential for maintaining suction performance and supporting your practice's overall infection control standards. By preventing buildup before it starts, Vac Attack helps ensure your equipment operates at peak efficiency day after day.
A major advantage noted by dental teams is how simple Vac Attack is to incorporate into a daily routine. The concentrated powder dissolves quickly in warm water, creating a non-foaming solution that is ready to flush in moments. One professional highlighted that it is "economical, easy-to-use," with just one scoop making a full 32-ounce solution. Furthermore, it is safe for daily use with all amalgam separators, giving you peace of mind. Because you are handling a concentrated cleaner, it's always wise to use proper protection. Pairing it with high-quality MacSafe nitrile gloves ensures your team can handle maintenance tasks safely and confidently.
Beyond its cleaning power, Vac Attack is recognized for its exceptional value. With up to 80 cleanings per jar, it offers a cost-effective solution for daily maintenance. Professionals appreciate that it is an "EPA compliant" cleaner, which simplifies regulatory adherence without sacrificing performance. The convenience of a single, effective product streamlines inventory management and reduces the need for multiple specialized cleaners. The fresh citrus scent is another frequently mentioned benefit, helping to eliminate odors and improve the overall environment of the treatment room. For practices looking to source reliable and economical dental supplies, Vac Attack stands out as a practical and valuable addition.
Using any chemical cleaner in a clinical setting requires a clear understanding of safety protocols. While Premier Vac Attack is formulated for safety and environmental compliance, following best practices is essential for protecting your team, your equipment, and your practice. A powerful cleaner that can dissolve tough bio-burden also demands respect and proper handling. Integrating a new product into your workflow means ensuring every team member knows how to use it correctly to prevent accidents and maximize its benefits. It’s all about creating a routine that is both effective and secure, where safety becomes second nature.
This approach not only safeguards your staff but also preserves the integrity of your expensive dental equipment and keeps your practice running smoothly. Think of it as part of your comprehensive risk management strategy. When your team is confident and well-trained in handling all clinical materials, it reduces the chance of procedural errors, equipment damage, or workplace injuries. A safe environment is a productive environment. Let's walk through the key guidelines for using Vac Attack safely, from regulatory compliance to the personal protective equipment your team needs to wear. Following these steps will ensure you get the powerful cleaning performance you expect without compromising on safety.
When you're using any chemical cleaner in your practice, safety and compliance are non-negotiable. That’s where Safety Data Sheets (SDS), often still called Material Safety Data Sheets (MSDS), come in. These documents are your guide to handling products like Premier Vac Attack safely, outlining everything from potential hazards to emergency procedures. You can typically find the SDS for Vac Attack directly on the manufacturer's product page. Before your team uses the cleaner, make it a standard practice to review this document and ensure everyone is equipped with the right personal protective equipment, like a reliable pair of MacSafe gloves. Making SDS review a part of your routine helps protect your staff and ensures your practice meets compliance standards.
Premier Vac Attack GREEN is specifically formulated to be compliant with the EPA’s Clean Water Act and align with the ADA’s best management practices for dental wastewater. This is a critical feature for any modern practice looking to maintain high standards of environmental stewardship. Adhering to these environmental regulations helps prevent the discharge of harmful pollutants and ensures your clinic operates responsibly. Using a pre-approved, compliant cleaner like Vac Attack removes the guesswork from your maintenance routine. It gives you peace of mind, knowing your evacuation system cleaning protocol meets national standards without requiring complex or costly adjustments to your plumbing or waste disposal systems.
Proper handling starts the moment the product arrives at your office. Always store your Premier Vac Attack container in a cool, dry area, away from direct sunlight and incompatible chemicals to maintain its stability and potency. For maximum effectiveness, it's vital to mix a fresh solution daily, as the active ingredients lose their cleaning power over time. After running the solution through your evacuation lines, make it a habit to immediately check and clean the chairside traps and the main vacuum filter. This step is crucial because Vac Attack is powerful enough to dislodge large pieces of accumulated debris, which can get caught and impede suction if not promptly removed.
Protecting your clinical team is always the top priority. When mixing or handling the Vac Attack solution, staff should always wear appropriate personal protective equipment (PPE). This includes safety glasses and high-quality disposable gloves. The MacSafe line offers reliable nitrile and latex gloves that provide excellent chemical resistance for this task. Ensure the area is well-ventilated during use to minimize inhalation of any vapors. Although Vac Attack is non-foaming, which reduces the risk of splashes, it's still important to have clear protocols for accidental skin or eye contact, which typically involve immediate and thorough rinsing with water. These simple steps are a core part of any effective infection control program.
A robust infection control protocol goes beyond surface disinfection; it addresses every potential source of contamination, including your evacuation system. Vac Attack is a foundational component of this protocol, specifically formulated to tackle the unique challenges inside your suction lines. During procedures, debris like bio-burden, prophy paste, and fluoride gels accumulate, creating the perfect environment for microbial growth and unpleasant odors. This buildup not only compromises suction performance by causing blockages and reducing airflow, but it also poses a significant cross-contamination risk. Aerosols can re-enter the operatory, and the system itself can become a reservoir for pathogens.
Vac Attack’s powerful, non-foaming formula works by dissolving and flushing this stubborn organic matter from the tubing. As Premier Dental notes, it is a "powerful cleaner for dental evacuation systems" that effectively "cleans out debris and germs (bio-burden) from these lines." By incorporating this specialized cleaner into your daily workflow, you ensure your evacuation system remains clear and hygienic. This simple step is critical for maintaining a safe clinical environment for your patients and staff, preventing equipment failure, and upholding the highest standards of care in your practice. A clean system is the first step in a comprehensive safety strategy.
While Vac Attack keeps your evacuation system clean from the inside, a complete infection control strategy also requires robust external protection. This is where you can pair its cleaning power with high-quality personal protective equipment. SurgiMac’s MacSafe line offers a full range of protective supplies, including nitrile exam gloves and disposable lab coats, designed to safeguard clinicians and patients from direct and indirect contact with contaminants. By using MacSafe products, you create an essential barrier that complements the internal hygiene maintained by Vac Attack. This two-pronged approach ensures that your equipment and your environment are equally protected, creating a comprehensive safety net that minimizes risk during every procedure.
To get the most out of Vac Attack, it’s vital to integrate it into a consistent system maintenance routine rather than using it sporadically. Regular, scheduled cleanings prevent the gradual accumulation of debris that leads to clogs, reduced suction, and costly repairs. Because Vac Attack is a fast-acting and easy-to-use powder, establishing a daily maintenance schedule is simple and efficient. As noted by Practicon, its organic chlorine-powered formula is designed for practical, routine use. By making Vac Attack a non-negotiable part of your end-of-day cleanup, you ensure your evacuation system operates at peak performance, extend the lifespan of your equipment, and maintain a consistently clean and safe clinical environment.
Once you’ve decided to integrate Premier Vac Attack into your maintenance routine, the next step is finding a reliable source. Sourcing from a reputable distributor is key to ensuring you receive an authentic, high-quality product that performs as expected. It also helps you streamline your procurement process and manage inventory effectively. Let’s look at your best options for purchasing this essential cleaner.
Your practice deserves the assurance that comes from working with a trusted national provider. When you source from a supplier like SurgiMac, you can be confident you’re receiving genuine Vac Attak™ Dental Evacuation System Cleaner that meets all quality standards. As a one-stop source for clinical solutions, we make it easy to bundle your purchase with other essential infection control supplies. This high-performance cleaner is specifically formulated to dissolve and remove debris and bio-burden from your evacuation lines, ensuring your system runs smoothly. By choosing a dependable partner, you simplify your ordering process and protect your equipment with products you can count on.
Investing in the right maintenance products is a smart financial decision for any practice. Premier Vac Attak™ is available as an 800g jar, complete with a pre-measured scoop, making it a cost-effective solution for daily maintenance. This powerful cleaner is designed to dissolve the stubborn bio-burden and organic debris that build up in your evacuation lines, ensuring your system runs at peak performance. A single jar provides over 100 cleanings, breaking down to an exceptionally low cost-per-use. You can easily add this essential cleaner to your next order of dental supplies, simplifying your inventory management while protecting your valuable equipment from costly clogs and repairs.
We know that a smooth and efficient ordering process is just as important as the quality of the products themselves. When you have questions about an order or need help finding the right item, you need support you can count on. Our dedicated customer service team is here to assist you with any part of your purchasing experience. Whether you need help placing an order for Vac Attack or want to inquire about our full range of infection prevention products, we’re here to help. Our goal is to ensure you get the supplies you need without any hassle, so you can stay focused on what matters most—your patients.
Managing operational costs is a priority for any successful practice. When purchasing consumables like Vac Attack, looking for bulk or promotional pricing can lead to significant savings. For example, some distributors offer special deals, such as Dental City's promotion to buy four jars and receive one free. Since each 800mg jar provides dozens of cleanings, stocking up is a smart financial move. For more insights on the product's benefits, industry publications often highlight its efficiency, as seen in Dental Compare's feature on Vac Attack GREEN. Always check with your primary supplier, including SurgiMac, to see what volume discounts or special offers are available for your account.
Q: How often should I use Vac Attack for the best results?
A: For routine maintenance, Vac Attack should be used at the end of every clinical day. Daily use helps prevent the accumulation and hardening of debris such as prophy paste, blood, fluoride treatments, and other materials commonly aspirated during procedures. If a system already has significant buildup or odor issues, an initial twice-daily cleaning for several days can help restore proper performance before transitioning to a regular daily schedule.
Q: Is Vac Attack safe for all types of evacuation systems and amalgam separators?
A: Yes, Vac Attack is formulated to be non-corrosive and compatible with standard dental evacuation systems, including those equipped with amalgam separators. Its formulation is designed to clean effectively without damaging metal, plastic, or rubber components. Products like Vac Attack GREEN are also designed to support compliance with environmental and wastewater management guidelines commonly followed in dental practices.
Q: What is the main difference between the regular Vac Attack and Vac Attack GREEN?
A: Both products are designed to dissolve organic buildup and maintain clean evacuation lines, but they differ in formulation. The standard Vac Attack uses an organic chlorine-based formula for rapid cleaning action. Vac Attack GREEN is a chlorine-free, neutral pH alternative intended for practices looking for a more environmentally conscious solution while still maintaining strong cleaning performance.
Q: Do I need to rinse the solution out of the lines after cleaning?
A: No additional rinse is typically required. Vac Attack is designed to remain in the lines after aspiration, allowing it to continue breaking down debris and biofilm overnight. This extended contact time improves cleaning efficiency and helps leave the evacuation system ready for use the next day.
Q: Why is Vac Attack a better choice than a standard enzymatic cleaner or bleach?
A: Vac Attack is specifically formulated for the types of debris commonly found in dental evacuation systems, including prophy paste, fluoride varnish, blood, and impression materials. Bleach can damage system components through corrosion, while some enzymatic cleaners may not effectively dissolve heavy dental debris. A dedicated evacuation system cleaner provides a balance of strong cleaning performance and equipment safety, helping maintain suction efficiency and prolong system life.
