Extremely thin flexible blades are opposed for easy handling of composite materials and interproximal contouring. Application: Class III, IV, V Available in Satin Steel™ XTS™ Coating: Aluminum Titanium Nitride (AlTiN) coating creates an extremely hard, smooth surface that resists scratching and sticking. The large, lightweight handle design is easy for clean-up

Read more less

15-80-8-12 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

15-80-8-12 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

15-96-8-12 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

12-80-5-8 Angle Formers for defining line angles, obtaining retentive form in dentin and placing bevels on enamel margins. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

15-96-8-12 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

7-80-2.5-9 Angle Formers for defining line angles, obtaining retentive form in dentin and placing bevels on enamel margins. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

10-80-7-14 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

9-80-4-8 Angle Formers for defining line angles, obtaining retentive form in dentin and placing bevels on enamel margins. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

10-80-7-14 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Part of the Tucker 8 Instrument Kit Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled.   Features Made with EverEdge Technology, a revolutionary stainless steel alloy which provides an optimal cutting edge; Ergonomic, lightweight handle provides improved comfort and reduced hand fatigue; Diamond knurled for increased tactile grip and control.

Read more less

13-95-8-14 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

For permanent removal of crowns by breaking the seal between tooth and crown after sectioning with a bur. Anterior 3.0mm The mini-elevator handle and notched tip provide a secure grip and excellent control when breaking the seal of cement. Pressure against the tooth is lessened, which reduces the potential for tooth fracture.    

Read more less

13-80-8-14 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

10-95-7-14 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

10-95-7-14 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

13-80-8-14 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Part of the Tucker 8 Instrument Kit Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled.   Features Made with EverEdge Technology, a revolutionary stainless steel alloy which provides an optimal cutting edge; Ergonomic, lightweight handle provides improved comfort and reduced hand fatigue; Diamond knurled for increased tactile grip and control.

Read more less

Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Part of the Tucker 8 Instrument Kit Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled.   Features Made with EverEdge Technology, a revolutionary stainless steel alloy which provides an optimal cutting edge; Ergonomic, lightweight handle provides improved comfort and reduced hand fatigue; Diamond knurled for increased tactile grip and control.

Read more less

13-95-8-14 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Part of the Tucker 8 Instrument Kit Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled.   Features Made with EverEdge Technology, a revolutionary stainless steel alloy which provides an optimal cutting edge; Ergonomic, lightweight handle provides improved comfort and reduced hand fatigue; Diamond knurled for increased tactile grip and control.

Read more less

Design holds most manufacturers» disposable brush inserts. Also excellent for sealant. Made of Immunity Steel™ to allow for autoclave steam sterilization.

Read more less

Standard discoid-cleoid configuration for shaping occlusal surfaces, contouring and carving. Tungsten carbide tips cut easily through all composite materials, cured or uncured, without streaking or discoloration. TC Carvers easily remove orthodontic bracket adhesives and are ideal for carving amalgam and composite materials.

Read more less

Adapts to natural tooth curvature and left and right-side dental anatomy. Concave edge reduces mesial and distal flash on margins. Convex side is a conventional cleoid carver. Tungsten carbide tips cut easily through all composite materials, cured or uncured, without streaking or discoloration. TC Carvers easily remove orthodontic bracket adhesives and are ideal for carving amalgam and composite materials.

Read more less

Used for holding articulating paper when checking occlusion of dental restorations and teeth. Holding the paper with an instrument rather than fingers assures better and complete coverage of the restoration or teeth to be verified.

Read more less

Used for accurate measurements for wax.

Read more less

Used for accurate measurements for metal and porcelain.

Read more less

Replacement tips for Chu's Aesthetic Gauges. Processing Disassemble tip and handle. Clean, disinfect, and sterilize components. Replace tips with fading markings. Avoid disinfection with phenols or iodophors. Do not use dry heat for sterilization. Note: The tip will last for approximately 5 reprocessing cycles.

Read more less

Replacement tips for Chu's Aesthetic Gauges. Processing Disassemble tip and handle. Clean, disinfect, and sterilize components. Replace tips with fading markings. Avoid disinfection with phenols or iodophors. Do not use dry heat for sterilization. Note: The tip will last for approximately 5 reprocessing cycles.

Read more less

#1/2 DE Hollenback Carver with Regular Handle.

Read more less

Designed to condense, smooth, carve and polish amalgam. Advanced technology and innovative design have enabled Hu-Friedy to produce a superior composite instrument: Satin Steel™ XTS™. XTS composite instruments allow for exceptional non-stick placement of materials without discoloring the restoration. Studies indicate Aluminum Titanium Nitride (AlTiN) coatings are consistently harder, smoother and stick less as compared to Titanium coatings. Additionally, Hu-Friedy XTS instruments are made from Immunity Steel™ for longer life.Source: Gerwatowski, L.J., McFall, D.B., Stach, D.: Carpal Tunnel Syndrome; Risk Factors and Preventive Strategies for the Dental Hygienist. Journal of Dental Hygiene, February 1992.   Features XTS Instruments Features & Benefits: Distinctive Black Finish Enhanced contrast between instrument, tooth structure and composite material. The black finish will not flake or discolor the restoration. Unique Smooth, Large, Lightweight Handle Design Easy clean-up, maximum comfort, reduced hand fatigue and an increased level of control.* Quality Craftsmanship & Variety of Designs Satin Steel XTS instruments offer unsurpassed performance and an extensive assortment of designs for all composite placement needs. Source: Gerwatowski, L.J., McFall, D.B., Stach, D.: Carpal Tunnel Syndrome; Risk Factors and Preventive Strategies for the Dental Hygienist. Journal of Dental Hygiene, February 1992.

Read more less

Used for waxing procedures and techniques. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.    

Read more less

Used for waxing procedures and techniques. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.    

Read more less

Used for waxing procedures and techniques. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.    

Read more less

Used for waxing procedures and techniques. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised.    

Read more less

Used for waxing procedures and techniques. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.    

Read more less

Ideal for waxing procedures and techniques, PKT1 features curved tapered tips used to flow on molten wax. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Ideal for waxing procedures and techniques, PKT1 features curved tapered tips used to flow on molten wax. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Ideal for waxing procedures and techniques, PKT4 is a modified carver used to perfect the external contours and remove excess wax at the cavo-surface margins. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instru Ideal for waxing procedures and techniques, PKT4 is a modified carver used to perfect the external contours and remove excess wax at the cavo-surface margins. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Ideal for waxing procedures and techniques, PKT2 features curved tapered tips used to flow on molten wax. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Ideal for waxing procedures and techniques, PKT2 features curved tapered tips used to flow on molten wax. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Ideal for waxing procedures and techniques, PKT36 features a pointed burnisher used to perfect and enhance the supplemental and developmental grooves. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, es Ideal for waxing procedures and techniques, PKT36 features a pointed burnisher used to perfect and enhance the supplemental and developmental grooves. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Ideal for waxing procedures and techniques, PKT3RM6 is similar to PKT3, but features a rounded tip vs. a pointed one. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be c Ideal for waxing procedures and techniques, PKT3RM6 is similar to PKT3, but features a rounded tip vs. a pointed one. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Ideal for waxing procedures and techniques, PKT5 is a special carver used to remove excess wax as cusp ridges are developed; its contour maintains desired convexity at these ridges. Waxing instruments should never be heated to an extreme (glowing) or the Ideal for waxing procedures and techniques, PKT5 is a special carver used to remove excess wax as cusp ridges are developed; its contour maintains desired convexity at these ridges. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

For mixing materials and general laboratory use.

Read more less

For mixing materials and general laboratory use. Wood handles are not compatible with heat sterilization. Hu-Friedy recommends autoclave steam sterilization.    

Read more less

For mixing materials and general laboratory use. Wood handles are not compatible with heat sterilization. Hu-Friedy recommends autoclave steam sterilization.    

Read more less

Used for laboratory waxing.

Read more less

Used for laboratory waxing.

Read more less

Used for laboratory waxing.

Read more less