Discover Spa, Tattoo and Barber shop Supplies by Category 

Super Rapid Self-contained Biological Indicator for Steam sterilization processes. Geobacillus stearothermophilus (ATCC 7953) 10^6 spores per vial. Readout: 1 hour. An optional visual pH color change confirmation could be made after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to a greenish color first, and then to yellow during incubation at 60 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 1 hour-reading. Fluorescence results may be compared to the 7-day visual reading. Note: if 7-day readout is performed, a humidified environment will be required to avoid medium to dry out. D-Value: Not lower than 1.5 minutes at 121 ºC. Another D-value is informed at 132 ºC and at 135 ºC. Z-Value is informed. Instructions For Use: Identify the Terragene® Bionova® BT222 SCBI by writing the sterilizer number (in case of having more than one), load number and processing date on the label. Pack the SCBI along with materials to be sterilized in an appropriate package according to recommended sterilization practices. Place the package in those areas which are considered most inaccessible for the sterilizing agent (e.g., the center of the load and areas near the door). Sterilize as usual. After the sterilization process has finished, open the sterilizer door, wait five minutes and remove the SCBI from the package. CAUTION: Wear safety glasses and gloves when removing the Terragene® Bionova® BT222 SCBI from the sterilized package. WARNING: Do not crush or handle the SCBI excessively, since this might cause the glass ampoule to burst. Let the SCBI cool down until it reaches room temperature. Check the Process Indicator on SCBI label. A color change to brown indicates that the SCBI has been exposed to Steam. IMPORTANT: This color change does not evidence the process effectiveness to achieve sterility. If the Process Indicator color has not changed, check the sterilization process. Press the lid to seal the tube. Crush the ampoule contained in the SCBI with an individual ampoule crusher or with the ampoule crusher placed within the incubator´s incubation area. Then shake the tube down vigorously, with movements similar to those performed to lower the temperature in a mercury thermometer, until the medium reaches the base of the tube and soaks the spore carrier entirely. Finally, place the SCBI in the incubator. Incubate the processed indicator and the positive control indicator in the appropriate Terragene® Bionova® Auto-Reader Incubators for a maximum of 1 hour at (60 ± 2) °C for super rapid readout. Specifications: Process: Steam Microorganism: Geobacillus stearothermophilus (ATCC 7953) Population: 10^6 Spores/carrier Read-Out Time: 1 h Regulations: IRAM 37102-1, IRAM 37102-3, ISO 11138-1, ISO 11138-3

Read more less

CDWA4 / Cleaning Indicator for cleaning performance tests. Challenge level: very high. Detects all the factors that affect the result of a washing process. Initial Color: Fuchsia. Result: removal of the fuchsia organic substance. Designed for routine control of cleaning processes and for monitoring automatic washing machines effectiveness as well as monitoring ultrasonic washing machines which operate at frequencies equal to or greater than 35 kHz, and temperatures between 30 ºC and 70 ºC. Characteristics: Challenge Level: Very high. Allows detection of all factors affecting the outcome of cleaning process. Initial Color: Fuchsia. Size: 70 mm x 30 mm (approximate). Synthetic temperature-stable support. Result: Elimination of fuchsia organic substance. To interpret results visually, use the results reference guide on product´s instructions for use. Optionally, the readout of the cleaning indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Choose the Chemdye® Splat CDWA indicator according to the desired difficulty. Place the indicator on the Chemdye® Splat CDWAH or Chemdye® Splat CDWAH-U holder. Place the system on the tray along with the material. Once the cleaning cycle is over, remove the indicator. Analyze Chemdye® Splat CDWA indicators using the reference table and record results. If unfavorable results are obtained, perform the appropriate corrective actions and repeat the washing process. Specifications: Process: Cleaning and thermodisinfection Initial Color: Fuchsia Regulations: ISO 13485, ISO/TS 15883-5

Read more less

Instructions For Use: Before The Test: Place the holder around the neck of the capsule. Press the holder down so that the groove of the holder fits securely around the neck of the vial. Insert the L shaped end on either side of the holder into the holes of the Ultrasonic device’s basket to hold the vial in position. The holder can be attached to a wire basket or perforated basket. Vials should be placed in the correct location within a tray / basket according to Ultrasonic Cleaning Indicator´s IFU based on the size of the tank. After the test is complete After the ultrasonic cycle remove the vial holding it with three fingers of one hand and the index finger and thumb of the other hand on the holder and lid of capsule. Place the index finger on the end of the holder, then place the thumb on the lid of the capsule for support, push the holder back off the neck of the capsule and remove the holder with both fingers.

Read more less

Holder for cleaning and thermodisinfection Indicators. Stainless Steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72 mm long, pin at the back side. ISO/TS 15883-5. Designed to hold Chemdye® CDWA and Integron® IT27W indicators in order to perform routine control of cleaning and thermal disinfection processes in automatic machines. Characteristics: Chrome plating SUS304 grade stainless steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72.5 mm long, pin at the back side. Basket: 32 mm wide, 37 mm long, 0.5 mm thick. The holder is designed to mimic the cleaning challenges posed by a large process load during the washing cycle and can be fixed on the tray, which allows reproducible location of the cleaning indicator in the washer-disinfector. When CDWA4 is placed within the holder, half of the test soil is obscured, thus simulating the joint of a surgical instrument, with water stream hitting it indirectly. The other half of the test soil is covered by a mesh, thus posing a difficulty for water stream to reach it, mimicking shadowed or occluded surfaces. The new design of CDWAH optimizes the control of the washer disinfectors ability to force water and detergent into and onto the test soil. Specifications: Process: Cleaning and thermodisinfection Regulations: ISO 15883

Read more less

CDWAH-U / Stainless steel re-usable holder of great resistance and durability. The holder is designed to be fixed on the tray, which allows reproducible location of the cleaning indicator in ultrasonic washing machines. Base: 32,7 mm wide, 72,5 mm long. Designed to hold Chemdye® CDWA cleaning indicators and perform routine control of cleaning processes in ultrasonic washers. Characteristics: Chrome plating SUS304 grade stainless steel re-usable holder of great resistance and durability. Base: 32 mm wide, 72.5 mm long, pin at the back side. The holder is designed to be fixed on the tray, which allows reproducible location of the cleaning indicator in ultrasonic washing machines, without representing a challenge to the washing process. Specifications: Process: Cleaning and thermodisinfection Regulations: ISO/TS 15883-5

Read more less

IT26-1YS / Unique point chemical integrator for Steam sterilization processes between 121° C and 134° C. Control of Steam sterilization processes between 121 ºC and 135 ºC. Characteristics: Type 5 Integrator Indicator (according to ISO 11140-1). One-side-laminated strips printed with indicator ink. Size: 70 mm x 23 mm. Initial Color: Yellow. Final Color: Black. 100 % Toxic Heavy Metal free. Instructions For Use: Place a chemical integrator Integron® IT26-1YS within each package, bag or tray that will be sterilized by Steam. In rigid containers place an IT26-1YS in every corner, or at least two diagonally opposite corners, to ensure that steam has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Steam, the ink must turn to the black reference color when the integration conditions are reached. Specifications: Process: Steam Initial Color: Yellow Final Color: Black Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

2 level chemical integrator for Ethylene Oxide sterilization processes. One-side laminated strips. Metals free. Integron® IT12 Chemical Integrators (Type 5 according to ISO 11140-1:2014 standard) are single-use two level chemical indicators that consist of paper strips laminated on the back side and printed with indicator ink. They have been designed for monitoring Ethylene Oxide (EO) sterilization processes. The integration level contains a purple/brown ink which was developed to turn to green when a theoretical spore population reaches its kill time, thus indicating that the SAFE condition has been met. Level 1 – Red: Exposure level. Indicator ink turns yellow to indicate exposition to the process, but does not ensure that the variables required to achieve the integration condition have been achieved (UNSAFE condition). Level 2 – Purple / brown: Integration level. Indicator ink turns green to indicate that the integration condition indicated in the quality certificate has been achieved. This condition consists of the kill time of a theoretical 106 Bacillus atrophaeus spore population, calculated in a BIER (Biological Indicator Evaluator Resistometer), and is called SAFE condition. Indicators 100% free of toxic heavy metals. Instructions For Use: Place a Integron® IT12 Chemical Integrator along with the material to be sterilized in a suitable package according to the recommended sterilization techniques. Place the indicators in those areas of most difficult access to the sterilizing agent. Perform the sterilization cycle. After the sterilization process has finished and evacuation/ventilation process is over, you may:               A. Remove the integrator indicator taking the necessary precaution to avoid                          contact with the remaining sterilizing agent.              B. Ventilate the load together with the integrator indicator and then perform                        the reading. Analyze the results. If the SAFE integration condition has been reached, the        sterilization process has been effective. Specifications: Process: Ethylene Oxide Initial Color: Level 1 Red, Level 2 purple-brown Final Color: Level 1 Yellow, level 2 Green Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

IT26-C Extender/ Moving front Chemical Integrator to monitor Steam sterilization processes between 118°C and 138°C. Control of Steam sterilization processes between 118 °C and 138 °C. Characteristics: Type 5 Integrating Indicator (according to ISO 11140-1). Size: 52 mm x 21 mm. Chemical Integrator consists of a paper wick and a steam and temperature sensitive chemical pellet contained in a paper/film/foil laminate. The chemical pellet melts and migrates as a dark bar along the paper wick. The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. The extent of migration depends on steam quality, time, and temperature. The ACCEPT result is reached when a theoretical spore population reaches its kill time, indicating integration condition has been reached. This condition is calibrated with the kill time of 106 Geobacillus stearothermophilus spore population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 °C, 128 °C, 135 °C. Optionally, the readout of the chemical indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Carefully open the package and remove only the number of indicators needed. Reseal the package tightly. Place a Integron® IT26-C indicator in each pack, peel pouch, container system or tray to be steam sterilized in the most inaccessible area to sterilizing agent. Perform de sterilization cycle. 4After the sterilization process has finished, the dark bar should have reached the ACCEPT zone. If the dark bar has not reached the ACCEPT zone, a REJECT result is indicated and the items in the pack, peel pouch, container system, or tray were not exposed to proper steam sterilization conditions. These items should be reprocessed according to established procedures and a new IT26-C has to be used. NOTE: In some extended or wet steam cycles, the dark bar can display discoloration in some zones of the reading window, imposing a difficulty for result´s interpretation (see Result Reference Guide for reference). Despite this, regarding cycle integration parameters, this process can be considered as accepted. In case the IT26-C indicator shows a damp appearance after the sterilization process, Terragene® recommend planning an equipment´s maintenance.

Read more less

IT26-C / Moving front Chemical Integrator to monitor Steam sterilization processes between 118°C and 138°C. Control of Steam sterilization processes between 118 °C and 138 °C. Characteristics: Type 5 Integrating Indicator (according to ISO 11140-1). Size: 52 mm x 21 mm. Chemical Integrator consists of a paper wick and a steam and temperature sensitive chemical pellet contained in a paper/film/foil laminate. The chemical pellet melts and migrates as a dark bar along the paper wick. The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met. The extent of migration depends on steam quality, time, and temperature. The ACCEPT result is reached when a theoretical spore population reaches its kill time, indicating integration condition has been reached. This condition is calibrated with the kill time of 106 Geobacillus stearothermophilus spore population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 °C, 128 °C, 135 °C. Optionally, the readout of the chemical indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual). Instructions For Use: Carefully open the package and remove only the number of indicators needed. Reseal the package tightly. Place a Integron® IT26-C indicator in each pack, peel pouch, container system or tray to be steam sterilized in the most inaccessible area to sterilizing agent. Perform de sterilization cycle. After the sterilization process has finished, the dark bar should have reached the ACCEPT zone. If the dark bar has not reached the ACCEPT zone, a REJECT result is indicated and the items in the pack, peel pouch, container system, or tray were not exposed to proper steam sterilization conditions. These items should be reprocessed according to established procedures and a new IT26-C has to be used. Despite this, regarding cycle integration parameters, this process can be considered as accepted. In case the IT26-C indicator shows a damp appearance after the sterilization process, Terragene® recommend planning an equipment´s maintenance. Specifications: Process: Steam Indicator Type: Type 5 chemical indicator Regulations: ISO 11140-1 More Info About This Product: User Manual

Read more less

CD40 / Multi-variable Chemical Indicator, strips printed with reactive ink for Plasma or Vaporized Hydrogen Peroxide sterilization processes. Control of plasma or vaporized H2O2 sterilization processes. Conditions: 6 minutes, 50 °C, 2,3 mg/l H2O2. Characteristics: Type 4 Chemical Indicator (according to ISO 11140-1). Strips printed with indicator ink. Size: 105 x 18 mm (approximate). Initial color: Purple. Final color: Green. 100 % Toxic Heavy Metals free. Instructions For Use: Place a Chemdye® CD40 Multivariable Process Indicator within each package, bag or tray that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure that the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Plasma or Vaporized Hydrogen Peroxide, the ink must turn to the green or lighter reference color when the sterilization parameters are reached. Specifications: Process: Hydrogen peroxide Initial Color: Purple Final Color: Green Indicator Type: Type 4 chemical indicator Regulations: ISO 11140-1 More Info About This Product: Color Chart

Read more less

Chemical Indicator, strips printed with reactive ink for Plasma or Vaporized Hydrogen Peroxide sterilization processes.Internal Control. Metals Free. Chemdye® CD42 Process Indicators (Type 1 according to ISO 11140-1:2014 standard) are single-use chemical indicators that consist of plastic strips printed with indicator ink. These indicators have been designed to monitor Plasma or Vaporized Hydrogen Peroxide sterilization processes within loads, ensuring an adequate exposure to the sterilizing agent during the sterilization process and allowing to distinguish between processed and unprocessed items. Innovative highly sensitive red ink was developed to turn to yellow when the indicator is exposed to Plasma or Vaporized Hydrogen Peroxide. Endpoint condition: 50 ºC, 6 minutes, 2.3 mg/l H2O2. Indicators 100% free of toxic heavy metals. Instructions For Use: Place a Chemdye® CD42 Process Indicator within each package, bag or tray that will be sterilized by Plasma or Vaporized Hydrogen Peroxide. In rigid containers, place the indicator in every corner, or at least two diagonally opposite corners, to ensure that the sterilization agent has reached the most inaccessible areas. Perform the sterilization cycle. After the sterilization process has finished, remove the indicators from the sterilizer and analyze the results. For all the chemical indicators exposed to Plasma or Vaporized Hydrogen Peroxide, the ink must turn to the yellow reference color when the sterilization parameters are reached. For reference color, please refer to Result Reference Guide. More Info About This Product: Color Chart

Read more less

Highly absorbent, extra-soft cotton tips. High-quality construction for superior safety and dependability. Latex free, recyclable and biodegradable.

Read more less

Soothe and moisturize your skin with these aloe vera-infused gloves. Reduce the risk of developing and/or worsening skin sensitization often caused by chemical accelerators commonly found in other nitrile gloves.

Read more less

This versatile glove stands out in exquisite emerald green. Textured fingertips for a secure grip, even when wet. Chemo-tested and chemical resistant.

Read more less

Plastic Shaft Collection Swab, 6"L, Sterile, 1/pk, 100 pk/bx, 10 bx/cs

Read more less

Plastic Shaft Collection Swab, 6"L, Sterile, 2/pk, 100 pk/bx, 10 bx/cs

Read more less

Plastic Shaft Collection Swab, 6"L, Sterile, 1/pch, 100 pch/bx, 10 bx/cs

Read more less

Wood Applicator Stick, Non-Sterile, 6", Round, Bulk, 1000 pk/bx, 20 bx/cs

Read more less

Swabstick, Solon Cotton Tip, 3In, Nonsterile, w/ Tap Tip, 100/bx, 10bx/cs

Read more less

Solon Care, Sterile, Plastic Stem,  6", 1000/bx, 10 bx/cs

Read more less

Solon Care, Non-Sterile, Wood, 3", Flat, 1000/bx, 10 bx/cs

Read more less

Rayon-Tipped Proctoscopic Applicator, Non-Sterile, Polypropylene Stick, 16" x 5/32", 50/bx, 10 bx/cs

Read more less

Rayon-Tipped Proctoscopic Applicator, Non-Sterile, Polypropylene Stick, 16" x 5/32", 100/bx, 10 bx/cs

Read more less

Rayon-Tipped OB-GYN Applicator, Non-Sterile, Plastic Stick, 8" x 5/32", 50/bx, 10 bx/cs (60 cs/plt)

Read more less

Rayon-Tipped OB-GYN & Proctoscopic Applicator, Sterile, Plastic Stick, 8" x 5/32", 2/pk, 50 pk/bx, 10 bx/cs

Read more less

OB-GYN Plastic Shaft, 8", Rayon-Tipped Applicator, Bulk, 500/cs

Read more less

Proprietary TotalClean™ technology provides 1-step cleaning and disinfection in a best-in-class contact time of just 1 minute. Eliminates 48 pathogens, including bacteria, fungi, TB and viruses, including the coronavirus, without damaging surfaces. Ideal for large, non-porous surfaces. ProSurface Disinfectant Spray, Eliminates 48 pathogens, including bacteria, fungi, TB and viruses, including the coronavirus, without damaging surfaces. *Treated surface must remain visibly wet for one minute. Active ingredients: ethyl alcohol 72.5% and didecyl dimethyl ammonium chloride 0.33 Pro-Surface disinfectant spray, 32 oz bottle

Read more less

Cotton-Tipped Applicator, 6" x 1/12", Wood Stick, Tapered Tip, 100/bg, 10 bg/bx, 10 bx/cs

Read more less

Cotton-Tipped Applicator, 6" x 1/12", Wood Stick,   100/bg, 10 bg/bx, 10 bx/cs

Read more less

Cotton-Tipped Applicator, 6" x 1/10", Plastic Shaft, Sterile, 2/pk, 100 pk/bx, 10 bx/cs

Read more less

Versatile all-purpose glove made with the unrivaled strength and durability of nitrile to deliver enhanced barrier protection and exceptional fit. Textured fingertips ensure a secure grip, even when wet. Chemo-tested SafeBasics True Fit Thin Powder-Free Nitrile Gloves, Blue. Small. 300/bx, 8 bx/cs

Read more less

Nitrile Exam Gloves are essential for medical professionals requiring high-quality protection during examinations and procedures. These Aquasoft NonSterile Nitrile Exam Gloves in blue provide both comfort and reliability for a range of clinical settings. Key Features and Benefits: Higher count per box saves space and reduces waste. Unique nitrile formulation offers comfort and tactile sensitivity comparable to latex without the risk of latex skin irritation and allergies. These gloves, originating from Malaysia, boast a standard cuff length and textured fingertips for enhanced grip. The beaded cuff style ensures secure wear, while the 2 mil to 4 mil fingertip thickness range provides optimal dexterity. The gloves are chemo tested, making them suitable for handling chemotherapeutic agents safely. Country of Origin Malaysia Application Exam Glove

Read more less

PURPLE NITRILE* Exam Gloves are frequently the glove of choice for healthcare workers who need outstanding barrier protection from bacteria, viruses and chemicals during procedures where risk of fluid exposure is moderate to high They have been tested against 29 chemotherapy drugs per the ASTM D6978-05 as well as common chemicals found in the healthcare environment Custom design enhances comfort and fit Textured fingertips enhance wet and dry grip Meets ASTM requirements for testing parameters for specific hazardous drugs-http://www.usp.org/compounding/general-chapter-hazardous-drugs-handling-healthcare Manufacturer O&M Halyard Inc Country of Origin Thailand Application Exam Glove Color Purple Color Family Lavender Cuff Style Beaded Cuff Fingertip Thickness Range 4.1 mil to 6.0 mil Range Fingertip Thickness: Typ.Values 0.14 mm (5.5 mil) Glove Exterior Textured Fingertips Glove Interior Without Coating Glove Length Standard Cuff Length HCPCS A4927 Hand Compatibility Ambidextrous Length in Inches 9.5 Inch Material Nitrile Protection Level Chemo Tested Sterility NonSterile Type Unspecified

Read more less

SafeSeal® Quattro sterilization pouches are made from high quality porous medical paper and mechanically sealed with TruePress™ technology. The perforated fold facilitates precise folding of a wide self-adhesive strip to form an airtight seal. Internal and external multiparameter process indicators for steam sterilization respond to three variables: time, temperature and saturated steam. The multiparameter process indicators printed directly on the pouch confirm sterilization parameters. Blue-tinted film makes it easy to view instruments and detect punctures or tears. Convenient thumb notch makes it easy to open the pouch without contaminating the contents.

Read more less

SafeSeal® Quattro sterilization pouches are made from high quality porous medical paper and mechanically sealed with TruePress™ technology. The perforated fold facilitates precise folding of a wide self-adhesive strip to form an airtight seal. Internal and external multiparameter process indicators for steam sterilization respond to three variables: time, temperature and saturated steam. The multiparameter process indicators printed directly on the pouch confirm sterilization parameters. Blue-tinted film makes it easy to view instruments and detect punctures or tears. Convenient thumb notch makes it easy to open the pouch without contaminating the contents.

Read more less

SafeSeal® Quattro sterilization pouches are made from high quality porous medical paper and mechanically sealed with TruePress™ technology. The perforated fold facilitates precise folding of a wide self-adhesive strip to form an airtight seal. Internal and external multiparameter process indicators for steam sterilization respond to three variables: time, temperature and saturated steam. The multiparameter process indicators printed directly on the pouch confirm sterilization parameters. Blue-tinted film makes it easy to view instruments and detect punctures or tears. Convenient thumb notch makes it easy to open the pouch without contaminating the contents.

Read more less

Cleans instruments, burs and apparatus. Removes blood, bioburden, contaminants and more. Also removes buffing compounds in a lab setting. Packed in super concentrated 1 oz tubes. 1 oz makes 1 gallon of cleaning solution. For use in an ultrasonic cleaner. Concentrated, 128:1 dilution ratio Single dose application Super convenient and easy to use Removes blood and organic debris from instruments and apparatus Can also be used as a carrier bath Product Attachments: Material Safety Dats Saheet

Read more less

Powder based product that cleans dentures, partials and bridges. Add one packet to 6 oz of water in a beaker and insert denture. Use one packet per cleaning. Discard solution after. For use in an ultrasonic cleaner. Concentrated Powder formula Single dose application Super convenient and easy to use Cost effective Eliminates spills and mess Application:  Cleans dentures, partials and bridges when used with a beaker or plastic bag in an ultrasonic cleaning machine. Product Attachments: Material Safety Data Sheet

Read more less

SB Swabs, 6in, Cotton Tip, ST, WH, 2/pch, 100pch/bx, 10bx/cs

Read more less

Safe for use on non-porous surfaces. Effective against TB in 3 minutes, and HIV-1, HCV, HBV and MRSA in 2 minutes. Disinfectant, cleaner, decontaminant, all in one. May be used on most medical device materials. For use on hard, non-porous surfaces. Ideal for hospitals, medical/dental offices, daycares, schools, clean rooms, home sanitizing, and nursing facilities CaviCide Disinfectant kills the following viruses within minutes. Mycobacterium tuberculosis var: bovis (BCG) (TB) Staphylococcus aureus Pseudomonas aeruginosa Salmonella enterica Trichophyton mentagrophytes Resistant Staphylococcus aureus (MRSA) Vancomycin Resistant Enterococcus faecalis (VRE) Staphylococcus aureus with reduced susceptibility to vancomycin Hepatitis B Virus (HBV) Hepatitis C Virus (HCV) Herpes Simplex Virus Types 1 and 2 Human Immunodeficiency Virus (HIV-1) Human Coronavirus (not associated with Severe Acute Respiratory Syndrome or SARS) Influenza A2 Virus Features This product may be used in healthcare settings such as: Hospitals Operating rooms Emergency medical settings Surgical centers Outpatient Surgical Centers Isolation areas Neonatal units Laboratories Nursing homes Ophthalmic and optometric facilities Dental offices Animal care facilities Salon settings Emergency vehicles Schools Health club facilities Bathrooms Daycare centers Correctional facilities Laundry rooms Other critical care areas where control of cross contamination between treated surfaces is important. It also effectively clean and disinfect, when used as directed, such items: Interior and exterior surfaces of infant incubators, bassinets Infant/child care equipment surfaces Oxygen hoods Ambulance equipment surfaces Amalgamators and dental curing lights Exterior surfaces of anesthesia machines and respiratory therapy equipment This product is not to be used as a terminal sterilant/high level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to preclean or decontaminate critical or semi-critical medical devices prior to sterilization or high level disinfection. This product may be used to disinfect non-critical medical devices, which come in contact only with intact skin. Manufacturer # 13-1025 Brand CaviCide™ Manufacturer Metrex Research Active Ingredients Isopropyl Alcohol Application Surface Disinfectant Cleaner Container Type Jug Dispensing Method Manual Pour Form Liquid Scent Alcohol Scent Sterility NonSterile Type Alcohol Based UNSPSC Code 42281604 Volume 2.5 gal.

Read more less

Advanced Sterilization Pouch: Elevate Your Sterilization Procedures Introducing our Sterilization Pouch, sized 10" x 15", a must-have for every medical and dental facility. With a focus on convenience, efficiency, and compliance, this product is designed to elevate your sterilization processes.What sets our pouch apart is its unique peel-off indicator that ensures thorough heat penetration within the pouch. Bid farewell to purchase secondary indicator strips – our pouch is a self-sufficient solution. It conveniently affixes to patient files, creating a permanent sterilization record, and aligning with CDC requirements for internal indicators.Crafted to the highest standards, our pouch boasts dual external heat and gas sterilization indicators, providing double assurance of successful sterilization. Certified for a remarkable minimum 5-year post-sterilization lifespan, it guarantees prolonged reliability.The aqua-tinted, transparent four-ply film allows easy identification of instrument setups, enabling swift recognition of compromised sterility. Coupled with medical-grade paper, this pouch enables optimal steam and gas penetration. Quality seals bolster its strength while ensuring a clean, fiber-free peel.

Read more less

Revolutionize Sterilization with Our State-of-the-Art 11" x 16" Sterilization Pouch: Unmatched Quality and Innovation Introducing our Sterilization Pouch, 11" x 16", a pinnacle of innovation and reliability for your sterilization needs. With a unique peel-off indicator, this pouch takes the guesswork out of sterilization. The indicator confirms heat penetration within the pouch, eliminating the need for secondary indicator strips. It seamlessly affixes to the patient file, ensuring a permanent record of the sterilization process.Meeting CDC requirements, our pouch features dual external heat and gas sterilization indicators. The certification for a minimum 5-year post-sterilization life underscores its longevity. The aqua-tinted, see-through, four-ply film enables swift instrument identification and allows for immediate assessment of sterility. Crafted from medical-grade paper, it enables thorough steam and gas penetration.Our pouch boasts quality seals that not only enhance its durability but also guarantee a clean, fiber-free peel. The easy-to-open overlap design streamlines your workflow. With a wide range of sizes tailored to various indications, it accommodates your diverse needs.Trust in a product that combines cutting-edge features, uncompromising quality, and adherence to the highest standards. Elevate your sterilization practices with our advanced pouch – an assurance of safety, efficiency, and peace of mind.

Read more less

Unparalleled Sterilization Confidence: Introducing our 12" x 18" Sterilization Pouch with Innovative Peel-Off Indicator Introducing our Sterilization Pouch, sized at 12" x 18", available in a convenient pack of 100. Designed to revolutionize your sterilization process, this pouch boasts a unique peel-off indicator that eliminates the need for separate indicator strips. Watch with confidence as the indicator confirms thorough heat penetration within the pouch, ensuring optimal sterilization without compromise.Crafted to meet CDC requirements, this pouch features an internal indicator for each package, streamlining your compliance process. The innovative dual external heat and gas sterilization indicators further reinforce its reliability. With a certified minimum 5-year post-sterilization life, rest assured that your instruments remain impeccably sterilized until use.Its aqua-tinted, four-ply film allows for effortless identification of instrument setups while safeguarding sterility. The robust medical-grade paper facilitates seamless steam and gas penetration. Quality seals augment the pouch's strength and offer a pristine, fiber-free peel every time.The pouch's user-friendly overlap design ensures easy opening, saving crucial moments in critical situations. With a range of sizes catering to diverse needs, this sterilization pouch stands as the pinnacle of safety and convenience. Elevate your sterilization procedures and uphold the highest standards of quality with this exceptional solution.

Read more less

Advanced Sterilization Pouch: Confidence in Protection and Precision Introducing our Sterilization Pouch, sized at 2¼" x 4", a true game-changer for your medical and dental sterilization needs. This remarkable product boasts a unique peel-off indicator, eliminating the necessity for additional indicator strips. With this innovation, you can effortlessly confirm heat penetration within the pouch, ensuring impeccable sterilization.Crafted to meet the rigorous demands of healthcare facilities, this pouch firmly adheres to patient files, creating an enduring record of sterilization procedures. Complying with CDC mandates, it integrates an internal indicator, guaranteeing precision in each package.Equipped with dual external heat and gas sterilization indicators, this pouch is your steadfast partner in upholding safety standards. Its certification for a minimum 5-year post-sterilization lifespan showcases its durability and reliability.Crafted with an aqua-tinted, transparent four-ply film, the pouch allows easy identification of instrument setups while offering a quick assessment of sterility status. Its robust, medical-grade paper ensures thorough steam and gas penetration, while quality seals amplify strength and a pristine, fiber-free peel.

Read more less

"Innovative Sterilization Pouch: Streamlined Confidence for Your Sterilization Process" Introducing our Sterilization Pouch, sized at 2¾" x 10", available in a convenient pack of 200. Revolutionize your sterilization process with this advanced solution that ensures the utmost confidence and convenience.Designed with precision, this pouch boasts a unique peel-off indicator, eliminating the need for separate indicator strips. Watch as it transforms, confirming thorough heat penetration within the pouch during sterilization cycles. This innovation aligns with CDC requirements, eliminating the guesswork and streamlining your process.Crafted for excellence, our pouch affixes effortlessly to patient files, offering a permanent sterilization record. The inclusion of dual external heat and gas sterilization indicators guarantees accuracy, while its remarkable certification for a minimum 5-year post-sterilization lifespan promises longevity.Through its aqua-tinted, four-ply film, you can effortlessly assess instrument setups and detect any compromise in sterility. The medical-grade paper, designed for steam and gas penetration, ensures robust performance. Quality seals reinforce strength, culminating in a fiber-free peel through the easy-to-open overlap design.

Read more less

"Innovative Sterilization Confidence: Introducing our Advanced 3¼" x 6½" Sterilization Pouch - 200/bx" Introducing our Sterilization Pouch, sized at 3¼" x 6½", available in a convenient pack of 200. Designed with meticulous attention to detail, this pouch is a paramount addition to your medical facility or dental practice.Crafted with innovation in mind, this pouch features a unique peel-off indicator that revolutionizes the sterilization process. With its smart design, it ensures absolute heat penetration within the pouch, eliminating the need for secondary indicator strips. Furthermore, this indicator conveniently adheres to the patient's file, creating a permanent record of the sterilization process, and fostering accountability and compliance.Exceeding the stringent standards set by the CDC, our pouch includes dual external heat and gas sterilization indicators, offering an added layer of assurance. Certified for a remarkable minimum 5-year post-sterilization life, this product is synonymous with reliability.The aqua-tinted, see-through four-ply film empowers you to effortlessly inspect instrument setups while also facilitating the identification of any potential compromise in sterility. Its robust medical-grade paper allows seamless steam and gas penetration, while the quality seals augment strength and deliver a clean, fiber-free peel.

Read more less

Advanced Sterilization Pouch: Ensuring Unrivaled Safety and Convenience Introducing our Sterilization Pouch, sized perfectly at 3½" x 10", offering exceptional sterilization assurance and convenience. With its ingenious peel-off indicator, your worries about heat penetration are put to rest. This unique feature eliminates the need for purchasing additional indicator strips, saving you time and resources.Designed to streamline record-keeping, the peel-off indicator can be affixed to the patient's file, providing a permanent record of the sterilization process. Meeting CDC requirements, the pouch boasts dual external heat and gas sterilization indicators, ensuring the highest level of safety.What sets this pouch apart is its post-sterilization longevity, certified for a remarkable minimum 5-year lifespan. The aqua-tinted, transparent four-ply film grants you visibility into instrument setups while allowing you to swiftly identify any potential compromise in sterility.Crafted from robust, medical-grade paper, this pouch enables thorough steam and gas penetration, while quality seals enhance its strength, ensuring a clean, fiber-free peel. The user-friendly overlap design guarantees easy opening, saving you precious time in critical moments.

Read more less