Products

Used for cavity preparation: retentive areas, internal line angles and removing hard caries. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

45° Steiglitz Post and Point Removal Forceps made with German Stainless Steel.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.    

Read more less

Lower Roots Serrated Forceps used for extracting teeth from the alveolar bone. Extraction forceps are ideal for extracting teeth from the alveolar bone. All hinged instruments should be cleaned and sterilized in an open position.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Highly polished stainless steel instruments used for composite placement and contouring.

Read more less

Upper Roots Serrated Forceps used for extracting teeth from the alveolar bone.    

Read more less

Upper Roots Serrated Forceps used for extracting teeth from the alveolar bone. Extraction forceps are ideal for extracting teeth from the alveolar bone. All hinged instruments should be cleaned and sterilized in an open position.

Read more less

End-cutting rongeurs used for trimming and recontouring alveolar bone and gross tissue removal.

Read more less

Upper Primary European Pediatric Forceps used for extracting teeth from the alveolar bone.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Plugger used to pack filling materials into cavity preparations (1.5 mm - 2.8 mm).

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

4R/4L Columbia University Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 4R/4L Columbia Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

The 5 Offset Angle Scalpel handle design is ideal for posterior and palatal areas with a 30 degree angle. The 5 Offset Angle Scalpel handle design is ideal for posterior and palatal areas and provides greater rotational movement with fingertip control while enhancing dexterity. Handle is 5.8" long with a 30 degree angle. Compatible with standard scalpel blades.

Read more less

For severing the periodontal ligament.1.5mm All periosteals come with the handle shown unless additional options are listed.

Read more less

Side-cutting rongeurs used for trimming and recontouring alveolar bone and gross tissue removal.

Read more less

The 5 Double-Bladed Scalpel Handle is designed to remove palatal tissue to obtain a graft used for root coverage with 1.5mm between blades. The 5 Double-Bladed Scalpel Handle is designed to remove palatal tissue to obtain a graft used for root coverage with 1.5mm between blades. The position of the blades permits a parallel incision method to remove an exact amount of tissue in a minmal amount of time and with minimal discomfort to the patient. The round scalpel handle provides greater rotational movement with fingertip control and enhances dexterity. Compatible with standard scalpel blades.

Read more less

The 5 Double-Bladed Scalpel Handle is designed to remove palatal tissue to obtain a graft used for root coverage with 1mm between blades. The 5 Double-Bladed Scalpel Handle is designed to remove palatal tissue to obtain a graft used for root coverage with 1mm between blades. The position of the blades permits a parallel incision method to remove an exact amount of tissue in a minmal amount of time and with minimal discomfort to the patient. The round scalpel handle provides greater rotational movement with fingertip control and enhances dexterity. Compatible with standard scalpel blades.

Read more less

Single-sided European simple stem mirror. 15/16 in (24mm) diameter. Hu-Friedy Rhodium-coated mirror resists scratching, the front surface mirrors provide sharp and distortion free images with a smooth finish for patient comfort.

Read more less

The 5 European Round Scalpel Blade Handle is used for cutting gingival tissue and making surgical incisions. The 5 European Round Scalpel Blade Handle is used for cutting gingival tissue and making surgical incisions. The round scalpel handle provides greater rotational movement with fingertip control and enhances dexterity. The #5 European Round Scalpel Blade handle features matte finished stainless steel. Compatible with standard scalpel blades.

Read more less

Double-ended explorer. Ergonomic, Satin Steel™ handle. Combination of #17 end for subgingival calculus detection and #23 end for caries detection. Hu-Friedy explorers are hand crafted from Duraspond steel, a specially blended steel alloy which provides flexibility and resilience for even the most precise diagnostic procedures.    

Read more less

Single-sided Cone Socket mirror. 15/16 in. (24mm) diameter. Rhodium-coated to resist scratching, Hu-Friedy's front surface mirrors provide sharp and distortion free images with a smooth finish for patient comfort. Features Rhodium coating to resist scratching Front surface for sharp, distortion free images Smoothly finished for patient comfort

Read more less

Single-sided Cone Socket mirror. 15/16 in. (24mm) diameter. Rhodium-coated to resist scratching, Hu-Friedy's front surface mirrors provide sharp and distortion free images with a smooth finish for patient comfort. Features Rhodium coating to resist scratching Front surface for sharp, distortion free images Smoothly finished for patient comfort

Read more less

The 5 Gardner Bone Chisel is used to shave bone with a 4.3mm mono-bevel tip. The 5 Gardner Bone Chisel is used to shave bone with a 4.3mm mono-bevel tip. Made with surgical grade stainless steel.

Read more less

Small and medium curved blades for thinning and shaping composite material at the gingival areas. 2.9mm/3.8mm Advanced technology and innovative design have enabled Hu-Friedy to produce a superior composite instrument: Satin Steel™ XTS™. XTS composite instruments allow for exceptional non-stick placement of materials without discoloring the restoration. Studies indicate Aluminum Titanium Nitride (AlTiN) coatings are consistently harder, smoother and stick less as compared to Titanium coatings. Additionally, Hu-Friedy XTS instruments are made from Immunity Steel™ for longer life. XTS Instruments Features & Benefits: Distinctive Black Finish, Enhanced contrast between instrument, tooth structure and composite material. The black finish will not flake or discolor the restoration. Unique Smooth, Large, Lightweight Handle Design, Easy clean-up, maximum comfort, reduced hand fatigue and an increased level of control. Quality Craftsmanship & Variety of Designs, Satin Steel XTS instruments offer unsurpassed performance and an extensive assortment of designs for all composite placement needs. Source: Gerwatowski, L.J., McFall, D.B., Stach, D.: Carpal Tunnel Syndrome; Risk Factors and Preventive Strategies for the Dental Hygienist. Journal of Dental Hygiene, February 1992.    

Read more less

Small reverse angle tips make it easy to place fissures, grooves and pits creating the ideal occlusal anatomy in hard to reach posterior areas. 2.0mm/2.2mm Advanced technology and innovative design have enabled Hu-Friedy to produce a superior composite instrument: Satin Steel™ XTS™. XTS composite instruments allow for exceptional non-stick placement of materials without discoloring the restoration. Studies indicate Aluminum Titanium Nitride (AlTiN) coatings are consistently harder, smoother and stick less as compared to Titanium coatings. Additionally, Hu-Friedy XTS instruments are made from Immunity Steel™ for longer life. XTS Instruments Features & Benefits: Distinctive Black Finish - Enhanced contrast between instrument, tooth structure and composite material. The black finish will not flake or discolor the restoration. Unique Smooth, Large, Lightweight Handle Design - Easy clean-up, maximum comfort, reduced hand fatigue and an increased level of control. Quality Craftsmanship & Variety of Designs - Satin Steel XTS instruments offer unsurpassed performance and an extensive assortment of designs for all composite placement needs. Source: Gerwatowski, L.J., McFall, D.B., Stach, D.: Carpal Tunnel Syndrome; Risk Factors and Preventive Strategies for the Dental Hygienist. Journal of Dental Hygiene, February 1992.    

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas. The Heidbrink root tip picks are designed for delicate root teasing procedures.

Read more less

Used for laboratory waxing.

Read more less

Luxating elevators have thin, sharp blades that are used to cut periodontal ligaments. The luxating elevator is used by rocking and cutting vs. an elevator that lifts and pries. Luxating elevators reduce putting pressure on adjacent teeth.

Read more less

Luxating elevators have thin, sharp blades that are used to cut periodontal ligaments. The luxating elevator is used by rocking and cutting vs. an elevator that lifts and pries. Luxating elevators reduce putting pressure on adjacent teeth.

Read more less

Periosteal Elevators are designed for reflecting and retracting the mucoperiosteum after incisions of the gingival tissue. Hu-Friedy periosteal elevators are manufactured from stainless steel to exacting specifications to ensure optimal performance and l

Read more less

Long, flexible spatula to mix medium body cements. Tapered fluted end scoops and loads mixed cement into crowns.

Read more less

Ideal for waxing procedures and techniques, PKT5 is a special carver used to remove excess wax as cusp ridges are developed; its contour maintains desired convexity at these ridges. Waxing instruments should never be heated to an extreme (glowing) or the Ideal for waxing procedures and techniques, PKT5 is a special carver used to remove excess wax as cusp ridges are developed; its contour maintains desired convexity at these ridges. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Multipurpose instrument used to clamp off blood vessels, remove small root tips and grasp loose objects. Featuring 1x2 straight beaks.

Read more less

The 5 Round Scalpel Blade Handle is used for cutting gingival tissue and making surgical incisions. The 5 Round Scalpel Handle provides greater rotational movement with fingertip control and enhances dexterity. Handle measures 6" long. Compatible with standard scalpel blade sizes.

Read more less

Wagner Straight Standard Series scissors with 1 serrated blade used for trimming tissue or cutting sutures. 11.5cm Standard Series Scissors offer a wide array of cutting blades to fit a variety of needs.

Read more less

Used to carve anatomical features and trim excess materials.    

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas.

Read more less

Double-ended explorer. Ergonomic handle. ALTiN coating tip. Satin Steel™ XTS™ explorer feature a non-stick Aluminum Titanium Nitride (ALTiN) coating. It is perfect for contouring dental anatomy during composite restorations. The dark coating also improves contrast between tooth and instrument tip.    

Read more less

Two needed for full assembly

Read more less

5.0 mm Osteotome used to contense bone material under the sinus. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.

Read more less

5.0 mm Osteotome used to carry and place bone grafting material into site of the elevated sinus floor. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.

Read more less

5.0 mm Osteotome used to carry and place bone grafting material into site of the elevated sinus floor. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.

Read more less

5.0 mm Osteotome used for the transport of bone. Designed to condense bone material and/or autogenous bone under the sinus. Minimizes the risk of perforation of the mucous membrane in sinus elevation procedures.

Read more less

5.0 mm Osteotome used for lateral bone condensation for elevation of the sinus floor. The angle assists with posterior access. Specially designed for closed sinus elevation operations in the lateral upper jaw region or in difficult-to-access maxillary areas.

Read more less