Crosstex

Latex free and lead free. The tape effectively seals tubing, autoclave bags, and CSR wraps. It indicates specific temperature has been achieved during sterilization cycle.

Read more less

Outer Splash Repellent Layer. Inner White Cellulose Layer. Extra Soft - will not Lint, Tear, Shred. High Breathability PFE = 95% at 0.1 micron.

Read more less

Outer Splash Repellant Layer. White Facial Soft Tissue Inner Layer For Sensitive Skin. High Breathability. PFE = 95% at 0.1 Micron.

Read more less

Constructed of an extra heavy ply of facial tissue bonded to a layer of poly film. Provides an excellent absorbent surface backed by a reliable moisture barrier.

Read more less

Constructed of an extra heavy ply of facial tissue bonded to a layer of poly film. Provides an excellent absorbent surface backed by a reliable moisture barrier.

Read more less

Constructed of an extra heavy ply of facial tissue bonded to a layer of poly film. Provides an excellent absorbent surface backed by a reliable moisture barrier.

Read more less

Sponge, Premium, 40g, Non-Sterile

Read more less

Sponge, 2" x 2", Premium, 50g, Non-Sterile

Read more less

The applicators features a soft cotton tip that is absorbent and won't lint. Made of a high quality hard wood, these applicators offer superior performance. The sterile 2's are available in an easy to peel package, and the non-sterile are packaged in bags of 100 with a sterilization indicator strip on the outside.

Read more less

Crosstex International DNC Roll, Non-Sterile, #2 Medium, 1½in. x 3/8in., 2000/bx, 12 bx/cs Recognized as the industry standard, these cotton rolls are soft, pliable, non-linting, non-irritating - absorbing up to 10 times their weight, thus minimizing the amount needed during a procedure. Made from 100% cotton. No cellulose or rayon fibers. Highly absorbent. Will not adhere to mucous membranes. Maintain shape when wet. Polywrapped box to protect contents.

Read more less

Sponge, Premium, Non-Sterile

Read more less

Sponge, 2" x 2", 5000/ctn, 4 ctn/cs

Read more less

Three plies of soft facial tissue bonded to a layer of poly film results in a towel with maximum absorbency qualities and a reliable moisture barrier

Read more less

Three plies of soft facial tissue bonded to a layer of poly film results in a towel with maximum absorbency qualities and a reliable moisture barrier

Read more less

This oversized 3 ply plus poly towel has a cut-out that allows it to fit the contour of the patient's neck, providing a more secure fit for added patient protection.

Read more less

Provides the often imitated, but never duplicated Crosstex embossing pattern, which allows moisture to flow horizontally across the towel, protecting patient's clothing. Offers our exclusive reinforced edge embossing design for added strength and durability where towel clips are placed. Bonds the layers of tissue (and poly, when applicable) securely together, eliminating seperation of the layers. Creates the strength of the towel horizontally through the combination of our proprietary manufacturing equipment and tissue formulation. This prevents tearing when a towel clip is applied.

Read more less

Three plies of soft facial tissue bonded to a layer of poly film results in a towel with maximum absorbency qualities and a reliable moisture barrier.

Read more less

Provides the often imitated, but never duplicated Crosstex embossing pattern, which allows moisture to flow horizontally across the towel, protecting patient's clothing. Offers our exclusive reinforced edge embossing design for added strength and durability where towel clips are placed. Bonds the layers of tissue (and poly, when applicable) securely together, eliminating seperation of the layers. Creates the strength of the towel horizontally through the combination of our proprietary manufacturing equipment and tissue formulation. This prevents tearing when a towel clip is applied

Read more less

Our Newly designed 5 oz. / 148ml Provide greater strength, a new embossed grip, making it easier to dispense and hold, and a double rolled lip for easy separation. Both the 5 oz. / 148ml and 3.5 oz/103ml cups are double coated for a lustrous, high gloss finish. both sizes dispense easily from any 5 oz. cup dispenser due to their special nesting qualities. Latex free.

Read more less

Unique embossing from greater strength and easy dispensing. Double rolled lip for easy separation and enhanced patient comfort. Thick walled for added strength and patient safety. Double-coated for lustrous, high gloss finish. Available in 9 colors. Not made with natural rubber latex.

Read more less

Facial tissue combined with poly for patient comfort and protection. Fluid resistant barrier between patient and pillow. Soft, strong and absorbent.

Read more less

Mail-In Sterilizer Monitoring Service, 12 Tests/Box. Certified for use in Steam, EO gas, Dry heat and Chemical vapor processes. All include laboratory reports, 24/7 access to test results via a secured website and immediate phone call in case of positive failed tests.

Read more less

Unique to the industry, Crosstex is the only manufacturer to offer an immediate readout integrator along with the spore test strip. Steam test results are documented and reported back to the customer after 24 hours incubation.

Read more less

Nylon Pouch, 2" x 10", 100/bx

Read more less

Extra heavy with a high poly finish. Non-skid foam base. Use for mixing: cements, composites, rubber base material and silicates.

Read more less

Create more space in lab freezers and inubators with Thermo Scientific Nunc MicroWell MiniTrays, the optical clarity of which allows the trays to be used with inverted microscopes.

Read more less

The 1 oz. / 3cl polypropelene cups offer a convenient means for dispensing dry or liquid medication. They can also be used as a mixing cup for monomers, methylacrylates and other materials. Features oz., cc, ml, dram and tsp. calibrations. The cups are unbreakable, yet can be squeezed to form a spout for pouring. Latex free.

Read more less

Strong and economical. Made of mylar polyester film. Resist solvents and will not stretch, curl or break.

Read more less

The ConFirm strips contain both Bacillus stearothermophilus and Bacillus subtilis spores and therefore may be used to test all sterilization processes-steam, chemical vapor, dry heat and ethylene oxide. Mail-in sterilizer monitoring service provides: test results in 24 hours, the ability to check results online, a free reminder program, peace of mind and sterility assurance. Easy to use: 1) Sterilize, 2) Mail, 3) Get results, 4) Get proof. Economical, one of the most cost- effective methods of biological monitoring.

Read more less

DUAL Load Record Card 3" x 5" 250/pk

Read more less

Polyethylene-backed paper stops bleed-through, prevents contamination from one sheet to the next. Unique dual-purpose feature - use poly-side down for greater absorbency, poly-side up for quick mixing.

Read more less

Polyethylene-backed paper stops bleed-through, prevents contamination from one sheet to the next. Unique dual-purpose feature - use poly-side down for greater absorbency, poly-side up for quick mixing.

Read more less

Clear plastic disposable light handle sleeve. Die-cut for easy placement and indicator arrow identifies opening for easy placement on handle. Will not fall off during use.

Read more less

Crosstex International GCAPTPK ASTM LEVEL 1 Le Petit Masque, Pink, 50/bx, 10 bx/cs Masks are three-quarters of an inch shorter than standard masks to help eliminate gapping and provide a more comfortable, protective fit for smaller faces. Fluid resistant pink outer layer with soft spunbound inner layer. PFE equals 98.5% at 0.1 micron.

Read more less

Crosstex International GCLBL Minimum Performance Mask, Latex Free (LF), Blue, 50/bx, 10bx/ctn **Item on Manufacturer Backorder- Limited Inventory when Available** White Facial Soft Tissue Inner Layer For Sensitive Skin. Facial Tissue Outer Layer. High Breathability. BFE equals 99.6% at 3 microns.

Read more less

Crosstex International GPRN95 Respirator, Blue/ White, 28/bx, 6 bx/cs (Orders are Non-Cancellable & Non-Returnable) Resistance to penetration by synthetic blood 160mmHG. NIOSH approved as N95 Particulate Respirator. Meets guidelines for TB exposure control. Malleable nose and chin pieces. Inner and outer fluid resistance layers. PFE=99.9% @ 0.1 micron. BFE=99.9% @3.1 micron.

Read more less

Ideal for procedures where low amounts of fluid, spray and/or aerosols are produced. 

Read more less

Crosstex International GCIBL ASTM Level 1 Mask, Latex Free (LF), Blue, 50/bx, 10 bx/ctn Outer Splash Repellant Layer. White Facial Soft Tissue Inner Layer For Sensitive Skin. High Breathability. PFE = 95% at 0.1 Micron.

Read more less

Crosstex International GCIBL100 ASTM Level 1 Mask, Latex Free (LF), Blue, 100/bx, 5 bx/cs Outer Splash Repellant Layer. White Facial Soft Tissue Inner Layer For Sensitive Skin. High Breathability. PFE = 95% at 0.1 Micron.

Read more less

All The Benefits of Isofluid FogFree Plus an Optically Clear/Distortion Free Wrap-Around Shield

Read more less

All The Benefits of Isofluid Plus a FogFree Feature. Exclusive Comfort Cushion. Unique FogFree Barrier on Inner Layer.

Read more less

Steam Indicator Tape, 8", Type 4, 250/bx

Read more less

Steam Indicator Strip, Laminated, 8in, Type 4, 250/bx

Read more less

In-office system for monitoring steam sterilizers. Easy to use and interpret. Results in 24 hours. Simply process vial in a normal sterilizer cycle. Then activate vial, incubate, and record results. If any spores survive the process, the vial medium will turn yellow. The incubator is 24 volt and holds up to 14 indicators. Indicators are also compatible with the current 3M Attest incubator.

Read more less

In-office system for monitoring steam sterilizers. Easy to use and interpret. Results in 24 hours. Simply process vial in a normal sterilizer cycle. Then activate vial, incubate, and record results. If any spores survive the process, the vial medium will turn yellow. The incubator is 24 volt and holds up to 14 indicators. Indicators are also compatible with the current 3M Attest incubator.

Read more less

In-office system for monitoring steam sterilizers. Easy to use and interpret. Results in 24 hours. Simply process vial in a normal sterilizer cycle. Then activate vial, incubate, and record results. If any spores survive the process, the vial medium will turn yellow. The incubator is 24 volt and holds up to 14 indicators. Indicators are also compatible with the current 3M Attest incubator.

Read more less

In-office system for monitoring steam sterilizers. Easy to use and interpret. Results in 24 hours. Simply process vial in a normal sterilizer cycle. Then activate vial, incubate, and record results. If any spores survive the process, the vial medium will turn yellow. The incubator is 24 volt and holds up to 14 indicators. Indicators are also compatible with the current 3M Attest incubator.

Read more less

Compact and easy to operate, each heat sealer comes with instructions for useHeat sealers are available in and 24" sizes and are ready to use after a short warm up periodIn approximately two seconds, the heat sealer has made a 1/2" sealIf object exceeding 1/8" thickness is in the sealing area, the heat sealer will not operate, providing protection to employeesTemperature setting can be changed to properly seal paper/poly and Tyvek packaging products, as well as dust covers

Read more less