Shop Orthodontic Products by Category

Multi-use pliers with serrations for bending NiTi up to .025" (.64 mm). For NiTi wire only. Reduce a multi-process step process down to one step with these wire-forming pliers. Simply squeeze and you are done; NO heat required. With a 10% slimmer working end than our 678-327 model, these less intrusive pliers are designed for ultimate patient comfort. For NiTi wire only.   Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Multi-use pliers for bending NiTi up to .025" (.64 mm). For NiTi wire only. Reduce a multi-process step process down to one step with these wire-forming pliers. Simply squeeze and you are done; NO heat required. With a 10% slimmer working end than our 678-327 model, these less intrusive pliers are designed for ultimate patient comfort. For NiTi wire only.   Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Emphasizes over-correction of rotations by producing an indentation at the mesial or distal line angles on the facial and/or lingual of a specific tooth. As an option, a rotational couple can also be created using vertical indents on facial and lingual surfaces on opposing sides of a tooth. The Vertical can also be used to produce an indent to produce a mild 'nudge' to enhance resolution of in-and-out discrepancies.

Read more less

Ultra slim tipped buccal tube tweezers to aid in placement. The ultra slim working ends of these tweezers are ideal for proper and effective buccal tube bond placement by allowing the practitioner to hold the buccal tubes reversely when the buccal tubes are to be bonded.

Read more less

Uniquely designed for lingual treatment, used to direct and torque .018" (.45mm) archwire.

Read more less

U Shaped Lingual Ligature Director with Picker for wires up to .021" x .025" (.53mm x .64mm) Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Uniquely designed for removal of lingual brackets. Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Uniquely designed for lingual treatment, cuts hard wires up to .018" (.45 mm). Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

The Spot creates a tiny rounded dimple for spot contacts to accent small individual tooth movements or added retention. The Spot creates a tiny rounded dimple for spot contacts to accent small individual tooth movements or added retention. The Spot is typically used to accent movements on any tooth in the aligner that needs just a “nudge.” The Spot’s small depression placed adjacent to the gingival embrasures can also enhance the retentiveness of an aligner or retainer.

Read more less

Creates half-moon cutouts for relief of clear aligners around bonded buttons used for elastics and nips away plastic to provide soft tissue clearance to prevent aligner impingement of tissue. Creates 6.0mm half-moon cutouts for relief of clear aligners around bonded buttons used for elastics. It can also nip away plastic to provide soft tissue clearance to prevent aligner impingement of tissue.

Read more less

Uniquely designed for lingual treatment; versatile utility pliers with serrations which is useful for placement and removal of archwires. 678-702-90 is similar to 678-702 with the exception of a 90° bend.   Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Uniquely designed for lingual treatment, cuts soft wire pins and ligature wires up to .012" (.30 mm). Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

A double ended hand instrument on #6 handle, combining a scaler and a picker.

Read more less

A double ended hand instrument on #6 handle, combining a ligature director and a scaler.

Read more less

The Counter Clockwise Wedge is used to produce a wedge-shaped indent in an aligner at the facial and at the opposite line angle lingual for a specific tooth to create a rotational couple. Used to create a counter clockwise rotation. The Counter Clockwise and The Clockwise Wedge instruments are used to produce indents into the facial and the lingual plastic for the rotational movement of a specific tooth. After determining the type of rotation desired, either The Counter Clockwise or The Clockwise Wedge instrument is selected for the tooth you wish to move. The direction of rotation is determined by an occlusal view of the tooth  The appropriate Wedge indent into the aligner is created with a gentle squeeze of the instrument on the labial, near the line angle of the tooth, adjacent to the facial embrasure.  Then the same instrument is positioned on the lingual surface at the opposite line angle to create the rotational couple. By positioning the “plunger” portion of the Counter Clockwise or Clockwise Wedge instrument inside the aligner, an “outie” reservoir is created.  This can be filled with composite and cured to create a wedge attachment on the tooth to enhance tooth movement in a subsequent series of aligners. 

Read more less

A double ended hand instrument on #6 handle, combining a small plugger and a picker.  

Read more less

A double ended hand instrument on #6 handle, combining a picker and ligature director.

Read more less

The Precision Punch creates a cut-out along the posterior buccal and lingual gumline of molars on clear aligners. The Precision Punch creates a cut-out along the posterior buccal and lingual gumline of molars on clear aligners. Providing a symmetrical window for precise placement of Metal and Gold Precision Aligner Buttons® or smaller buttons. In addition, the Precision Punch can nip away plastic to provide relief from impingement of tissue.

Read more less

The Eraser is designed to reverse or remove unwanted indents placed by other instruments in the Clear Collection. The Mesial Wedge and Distal Wedge are often used together to generate a rotational couple for a specific tooth.

Read more less

The Clockwise Wedge is used to produce a wedge-shaped indent in an aligner at the facial and at the opposite line angle lingual for a specific tooth to create a rotational couple. Used to create a clockwise rotation. The Counter Clockwise and The Clockwise Wedge instruments are used to produce indents into the facial and the lingual plastic for the rotational movement of a specific tooth. After determining the type of rotation desired, either The Counter Clockwise or The Clockwise Wedge instrument is selected for the tooth you wish to move. The direction of rotation is determined by an occlusal view of the tooth  The appropriate Wedge indent into the aligner is created with a gentle squeeze of the instrument on the labial, near the line angle of the tooth, adjacent to the facial embrasure.  Then the same instrument is positioned on the lingual surface at the opposite line angle to create the rotational couple. By positioning the “plunger” portion of the Counter Clockwise or Clockwise Wedge instrument inside the aligner, an “outie” reservoir is created.  This can be filled with composite and cured to create a wedge attachment on the tooth to enhance tooth movement in a subsequent series of aligners. 

Read more less

A double ended hand instrument on #6 handle, combining a large plugger and a picker.

Read more less

A double ended hand instrument on #6 handle, combining a SH6 scaler and a SH7 scaler.  

Read more less

A double ended hand instrument on #6 handle, combining a scaler and a band pusher.

Read more less

The Ortho Adjustment Kit features instrumentation designed for ortho adjustment applications. The Ortho Adjustment Kit features instrumentation tailored specifically for Orthodontic Adjustment procedures.   Features 678-504 - Slim Direct Bond Bracket Holder Tweezers 678-907 - Plugger with Picker MIR5 - 5 FS CS Mirror, Single Sided, Single MH6 - Cone Socket Mirror Handle, Satin Steel 678-330 - Mathieu Pliers-Ortho 678-325 - Bird Beak w/ Cutter 678-501 - Slim Line Weingart Pliers 678-101L - Long Handle Universal Cutter w/hold 678-500 - Slim Line Micro Cutter IMORTHLG8 - Large Thin Ortho Cassette Blue

Read more less

A double ended hand instrument on #41 handle, combining an explorer and a ligature director; ideal for placing and removing elastic ligatures.

Read more less

A double ended hand instrument on #41 handle, combining a tucker and a ligature director.

Read more less

A double ended hand instrument on #41 handle, combining a plugger and a ligature director.

Read more less

Developed by Dr. Jay Bowman, the Clear Collection™Kit features innovative instruments designed specifically for "invisible" aligner adjustment applications.

Read more less

The Ortho Debanding Debonding Kit features instrumentation designed for ortho debanding/debonding applications. The Ortho Debanding Debonding Kit features instrumentation tailored specifically for Orthodontic Debanding and Debonding procedures. Features MIR5 - 5 FS CS Mirror, Single Sided, Single MH6 - Cone Socket Mirror Handle, Satin Steel 678-914 - Scaler/Picker EXS23 - 23 SE Explorer 678-220L - Angulated Bracket Remover Pliers 678-503 - Slim Line Band Remover Pliers 678-101L - Long Handle Universal Cutter w/hold 678-501 - Slim Line Weingart Pliers IMORTHSM8 - Small Thin Ortho Cassette, Blue"

Read more less

A double ended hand instrument on #41 handle offering two ligature directors.

Read more less

A double ended hand instrument on #41 handle, combining a plugger and a picker.

Read more less

The Ortho Bonding Kit features instrumentation designed for ortho bonding applications. The Ortho Bonding Kit features instrumentation tailored specifically for Orthodontic Bonding procedures. Features 678-504 - Slim Direct Bond Bracket Holder Tweezers 678-906 - Band Pusher/Scaler MIR5 - 5 FS CS Mirror, Single Sided, Single MH6 - Cone Socket Mirror Handle, Satin Steel 678-501 - Slim Line Weingart Pliers 678-101L - Long Handle Universal Cutter w/hold 678-205 - Band Seating Pliers 678-330 - Mathieu Pliers-Ortho IMORTHSM8 - Small Thin Ortho Cassette, Blue

Read more less

A double ended hand instrument on #41 handle, combining a tucker and a ligature director.

Read more less

The Clear Aligner Adjustment Kit features instrumentation designed for ortho clear aligner applications. The Clear Aligner Adjustment Kit features instrumentation tailored specifically for cases utilizing Clear Aligners.   Features 678-800 - The Tear Drop Cutter 678-801 - The Vertical Pliers 678-802 - The Horizontal Pliers 678-803 - The Hole Punch Cutter SCGC - Crown & Gold Scissors, Curved IMORTHLG8 - Large Thin Ortho Cassette, Blue

Read more less

Used to place elastics.

Read more less

Single End Ligature Director for .020" slot.

Read more less

Designed for proper wire placement and improved torque expression in an .018" slot lingual system.

Read more less

.018" Ligature Director, specially designed for lingual application.

Read more less

The Bite Plane creates an outdent along the lingual side of the maxillary anterior of clear aligners. Providing a “bite turbo-like” effect with intrusive force on anterior teeth to help correct anterior deep bites and assist with closing posterior open bites. By positioning the “plunger” portion of the Mesial or Distal Wedge instrument inside the aligner, an “outie” reservoir is created.  This can be filled with composite and cured to create a wedge attachment on the tooth to enhance tooth movement in a subsequent series of aligners.   

Read more less

The Bootstrap Punch creates a cut-out along the gumline of clear aligners, providing a window for perfect placement of bonded buttons. Bootstrap mechanics with orthodontic elastics stretched over the aligner (from lingual to labial button) assist with directing lagging teeth to seat in the aligner trays. In addition, the Bootstrap Punch may be used to nip away plastic to provide relief from impingement of tissue.

Read more less

A double ended hand instrument on #41 handle, combining a band pusher and a scaler.

Read more less

A double ended hand instrument on #6 handle, combining a dull scaler and a band pusher.  

Read more less

A single ended band pusher on a #506 handle. Aids in placement and burnishing of band. Similar to BP300 except the band pusher is shorter on BP300S.

Read more less

A single ended band pusher on a #502 handle. Aids in placement and burnishing of band.

Read more less

A double ended hand instrument on #41 handle, combining a band pusher and a scaler; band pusher shorter than BP300. Versatile instrument for band placement and clean up of band cement. Similar to BPS1 except the band pusher is shorter on BPS2.

Read more less

The Light Wire Bird Beak Pliers with Groove are precision orthodontic tools designed for accurate bending, forming, and adjustment of light orthodontic wires. Featuring a grooved beak, these pliers provide extra grip and control, making them ideal for intricate wire manipulation without slipping. Constructed from high-grade stainless steel, these pliers offer exceptional durability, corrosion resistance, and can withstand repeated sterilization. Their ergonomic design ensures comfort and reduced hand fatigue during prolonged use. Key Features: Grooved Beak Design: Provides superior grip on wires for precise adjustments. High-Quality Stainless Steel: Corrosion-resistant and long-lasting. Smooth Finish: Prevents wire damage while maintaining a secure hold. For Light Wire Applications: Perfect for wires up to .030" (0.76 mm). Autoclavable: Fully sterilizable for maximum hygiene and safety. Applications:Used by orthodontic professionals for bending loops, springs, and forming contours in light orthodontic wires with enhanced control.

Read more less

The SurgiMac Light Wire Bird Beak Pliers are precision-engineered orthodontic instruments designed for accurate bending and forming of light orthodontic wires. Crafted from premium stainless steel, these pliers ensure durability, corrosion resistance, and long-lasting performance in clinical environments. Featuring dual conical and cylindrical beaks, they allow smooth and precise bending of round and light wires without marring the surface. Ideal for working with wires up to .030" (0.76 mm), these pliers provide superior control and comfort for orthodontic professionals. Key Features: High-Quality Stainless Steel: Resistant to rust and staining for extended use. Precision Bird Beak Design: Perfect for bending light and round orthodontic wires. Smooth, Polished Jaws: Protect wires from scratches or damage during adjustments. Lightweight Air Series Construction: Ergonomically designed for reduced hand fatigue. Autoclavable: Fully sterilizable for optimal infection control. Applications:Ideal for orthodontists and dental professionals for forming loops, springs, and accurate bends in light wires.

Read more less

SurgiMac Jarabak Pliers are designed for precise bending of archwires and forming accurate loops in orthodontic treatments. Their specialized design allows controlled adjustments for wire shaping and loop-making techniques, ensuring effective and consistent results. Made from premium stainless steel, these pliers offer durability, smooth handling, and long-lasting clinical performance. MaterialHigh-quality stainless steel for strength, corrosion resistance, and durability. SpecificationsType: Jarabak PliersApplication: Bending archwires and forming precise loopsDesign: Specialized tip for controlled wire adjustmentsSeries: Air Series PackagingPack Size: 1/Pk BrandAir Series

Read more less