Orthodontic Products

Designed for placing first, second and third order bends on stainless steel wires up to .022" x .025" (.56 mm x .64 mm). .050" (1.28 mm) blade width

Read more less

Direct Bond Bracket Tweezers. 50% slimmer at tip as compared to 678-212. Direct bond bracket tweezers offer the practitioner a confident and more visible grasp when bringing the bracket to the patient's mouth, while the thinner back end of the instrument allows for an easy manipulation of the bracket's position by a simple flip of the instrument. Allowing for one versus two instruments to be used in bracket placement and manipulation.

Read more less

Serrated tips makes this ideal for gripping and placing elastic auxiliaries. Similar to 678-330 but with wider tips.

Read more less

Torquing Pliers for stainless steel wires, with .016"/.018" Key. Replacement key available. Learn more: 678-020

Read more less

Designed for the forming and contouring of NiTi archwire up to .020" (.51 mm). For NiTi wire only.

Read more less

Slim band removing pliers with tapered beak providing improved visibility and access. These pliers come with the 3/16" pad already loaded in the working end, and with an extra 1/4" to try. Replacement pads can be re-ordered as needed. Check out the products: 678-014 and 678-036

Read more less

Double-sided offset beak permits bayonet bends on wires up to .022" x .025" (.56 mm x .64 mm). Pliers create a right-hand or left-hand step-up or step-down at 1mm.   Features Crafted with Immunity Steel, the highest quality Surgical Grade Stainless Steel, containing an optimal blend of carbon and chromium. These elements, combined with our exclusive processing, assure the creation of an outstanding instrument that will be resistant to corrosion given proper use and care.

Read more less

Excellent for forming helical closing loops and arch adjustments on stainless steel wires up to .022" x .025" (.56 mm x .64 mm).

Read more less

Double-sided offset beak permits bayonet bends on wires up to .022" x .025" (.56 mm x .64 mm). Pliers create a right-hand or left-hand step-up or step-down at 3/4mm.   Features Crafted with Immunity Steel™, the highest quality Surgical Grade Stainless Steel, containing an optimal blend of carbon and chromium. These elements, combined with our exclusive processing, assure the creation of an outstanding instrument that will be resistant to corrosion given proper use and care.

Read more less

Double-sided offset beak permits bayonet bends on wires up to .022" x .025" (.56 mm x .64 mm). Pliers create a right-hand or left-hand step-up or step-down at 1/2mm.   Features Crafted with Immunity Steel™, the highest quality Surgical Grade Stainless Steel, containing an optimal blend of carbon and chromium. These elements, combined with our exclusive processing, assure the creation of an outstanding instrument that will be resistant to corrosion given proper use and care.

Read more less

Torquing Pliers for stainless steel wires, with .019"/.022" Key. Replacement key available. Learn more: 678-020

Read more less

Smooth bending surfaces for a range of loop sizes while providing a sharp blade for cutting, accommodates stainless steel wires up to .025" (.64 mm).

Read more less

Multi-use pliers for bending NiTi up to .025" (.64 mm). For NiTi wire only. Reduce a multi-process step process down to one step with these wire-forming pliers. Simply squeeze and you are done; NO heat required. With a 10% slimmer working end than our 678-327 model, these less intrusive pliers are designed for ultimate patient comfort. For NiTi wire only.

Read more less

Designed to cut soft wire pins and ligature wires up to .012" (.30 mm). Micro cutter with 15? offset tip with ultra slim profile is a plus in the most difficult to access areas. Similar to 678-110 with 13% smaller working end.

Read more less

Multi-use pliers for bending NiTi up to .025" (.64 mm). For NiTi wire only. Reduce a multi-process step process down to one step with these wire-forming pliers. Simply squeeze and you are done; NO heat required. For NiTi wire only. 678-502 is a 10% slimmer version of the 678-327.

Read more less

Bends a variety of smooth loops on stainless steel wires up to .022" x .025" (.56 mm x .64 mm).

Read more less

Versatile utility pliers with serrations that is useful for placement and removal of archwires. As an extension of your hands, the serrated tips allow for better gripping and accessibility into tight spaces that are typically not possible with hands. These pliers help guide the archwire through buccal tubes and into brackets with ease with a 20% reduced working end as compared to our 678-201 model and 45% reduced working end as compared to 678-202.

Read more less

Mathieu Pliers with Perma Sharp inserts. These are ideal when you want the flexibility of using for elastic and stainless steel ligatures. The Perma Sharp insert can be replaced up to two times, extending the life of the instrument.

Read more less

Slimmer, serrated tips makes this ideal for gripping and placing elastic auxiliaries.

Read more less

Provides optimum accuracy and precision in forming and closing loops with one cylindrical three-step beak and one triangular beak, on wires up to .022" x .025" (.56 mm x .64 mm).

Read more less

Places V Bend on archwires up to .022" x .025" (.56 mm x .64 mm). Places V Bend in archwires, including nickel titanium, to prevent archwire from traveling.

Read more less

The Petite Punch cuts a 4.5mm half-moon cutout for relief of clear aligners around bonded buttons used for elastics and nips away plastic to provide soft tissue clearance to prevent aligner impingement of tissue. The Petite Punch cuts a 4.5mm half-moon cutout in an aligner for relief of the plastic around bonded buttons used for elastics. When only a small cut-out is required to provide clearance for buttons or hooks on the buccal but also on the lingual of any tooth in the aligner, especially for smaller teeth. The Petite Punch can also be used to “nip away” plastic at the edge of aligners to provide relief from soft tissue impingement or irritation.

Read more less

Creates a notch at the gingival margin of clear aligners anywhere elastic hooks are required. Creates a notch at the gingival margin of clear aligners anywhere elastic hooks are required, providing a reservoir to hold the elastics in place as the aligner is seated, permitting easier manipulation of elastics by the patient. Please visit our Clear Collection™ Page to learn more about our products.

Read more less

Lingual Ligature Director with Picker for wires up to .021" x .025" (.53mm x .64mm) Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Uniquely designed for lingual treatment; versatile utility pliers with serrations which is useful for placement and removal of archwires. Similar to 678-702 with the exception of a 90° Bend. Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Bends stainless steel archwire distal to the 1st or 2nd molar; up to .021"x .025" (.53 mm x 64 mm). Designed to bend up to .021" x .025" stainless steel archwire, the slender working ends helps improve access and enhance visibility in the posterior region. Use this instrument to cinch back posterior stainless steel wire distal to the buccal tube.

Read more less

Produces an indentation to accent individual root torque.

Read more less

These pliers aid in lingual bracket removal. The remarkable design allows for quick debonding while ensuring patient comfort is not compromised. Debonding pliers are placed lingually such that one arm of the pliers reaches below the bracket. The arm then hooks under the tie wing of the bracket while the other arm wedges under the bracket's adhesive interface. When squeezed, the wedged arm slides down the lingual surface of the tooth, successfully removing the bracket.   Features Hu-Friedy pliers are crafted with Immunity Steel™ alloy, a high-quality surgical grade stainless steel which combines an optimal blend of carbon and chromium ensuring strength and corrosion resistance

Read more less

Multi-use pliers with serrations for bending NiTi up to .025" (.64 mm). For NiTi wire only. Reduce a multi-process step process down to one step with these wire-forming pliers. Simply squeeze and you are done; NO heat required. With a 10% slimmer working end than our 678-327 model, these less intrusive pliers are designed for ultimate patient comfort. For NiTi wire only.   Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Multi-use pliers for bending NiTi up to .025" (.64 mm). For NiTi wire only. Reduce a multi-process step process down to one step with these wire-forming pliers. Simply squeeze and you are done; NO heat required. With a 10% slimmer working end than our 678-327 model, these less intrusive pliers are designed for ultimate patient comfort. For NiTi wire only.   Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Emphasizes over-correction of rotations by producing an indentation at the mesial or distal line angles on the facial and/or lingual of a specific tooth. As an option, a rotational couple can also be created using vertical indents on facial and lingual surfaces on opposing sides of a tooth. The Vertical can also be used to produce an indent to produce a mild 'nudge' to enhance resolution of in-and-out discrepancies.

Read more less

Ultra slim tipped buccal tube tweezers to aid in placement. The ultra slim working ends of these tweezers are ideal for proper and effective buccal tube bond placement by allowing the practitioner to hold the buccal tubes reversely when the buccal tubes are to be bonded.

Read more less

Uniquely designed for lingual treatment, used to direct and torque .018" (.45mm) archwire.

Read more less

U Shaped Lingual Ligature Director with Picker for wires up to .021" x .025" (.53mm x .64mm) Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Uniquely designed for removal of lingual brackets. Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Uniquely designed for lingual treatment, cuts hard wires up to .018" (.45 mm). Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

The Spot creates a tiny rounded dimple for spot contacts to accent small individual tooth movements or added retention. The Spot creates a tiny rounded dimple for spot contacts to accent small individual tooth movements or added retention. The Spot is typically used to accent movements on any tooth in the aligner that needs just a “nudge.” The Spot’s small depression placed adjacent to the gingival embrasures can also enhance the retentiveness of an aligner or retainer.

Read more less

Creates half-moon cutouts for relief of clear aligners around bonded buttons used for elastics and nips away plastic to provide soft tissue clearance to prevent aligner impingement of tissue. Creates 6.0mm half-moon cutouts for relief of clear aligners around bonded buttons used for elastics. It can also nip away plastic to provide soft tissue clearance to prevent aligner impingement of tissue.

Read more less

Uniquely designed for lingual treatment; versatile utility pliers with serrations which is useful for placement and removal of archwires. 678-702-90 is similar to 678-702 with the exception of a 90° bend.   Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Uniquely designed for lingual treatment, cuts soft wire pins and ligature wires up to .012" (.30 mm). Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

A double ended hand instrument on #6 handle, combining a scaler and a picker.

Read more less

A double ended hand instrument on #6 handle, combining a ligature director and a scaler.

Read more less

The Counter Clockwise Wedge is used to produce a wedge-shaped indent in an aligner at the facial and at the opposite line angle lingual for a specific tooth to create a rotational couple. Used to create a counter clockwise rotation. The Counter Clockwise and The Clockwise Wedge instruments are used to produce indents into the facial and the lingual plastic for the rotational movement of a specific tooth. After determining the type of rotation desired, either The Counter Clockwise or The Clockwise Wedge instrument is selected for the tooth you wish to move. The direction of rotation is determined by an occlusal view of the tooth  The appropriate Wedge indent into the aligner is created with a gentle squeeze of the instrument on the labial, near the line angle of the tooth, adjacent to the facial embrasure.  Then the same instrument is positioned on the lingual surface at the opposite line angle to create the rotational couple. By positioning the “plunger” portion of the Counter Clockwise or Clockwise Wedge instrument inside the aligner, an “outie” reservoir is created.  This can be filled with composite and cured to create a wedge attachment on the tooth to enhance tooth movement in a subsequent series of aligners. 

Read more less

A double ended hand instrument on #6 handle, combining a small plugger and a picker.  

Read more less

A double ended hand instrument on #6 handle, combining a picker and ligature director.

Read more less

The Precision Punch creates a cut-out along the posterior buccal and lingual gumline of molars on clear aligners. The Precision Punch creates a cut-out along the posterior buccal and lingual gumline of molars on clear aligners. Providing a symmetrical window for precise placement of Metal and Gold Precision Aligner Buttons® or smaller buttons. In addition, the Precision Punch can nip away plastic to provide relief from impingement of tissue.

Read more less

The Eraser is designed to reverse or remove unwanted indents placed by other instruments in the Clear Collection. The Mesial Wedge and Distal Wedge are often used together to generate a rotational couple for a specific tooth.

Read more less

The Clockwise Wedge is used to produce a wedge-shaped indent in an aligner at the facial and at the opposite line angle lingual for a specific tooth to create a rotational couple. Used to create a clockwise rotation. The Counter Clockwise and The Clockwise Wedge instruments are used to produce indents into the facial and the lingual plastic for the rotational movement of a specific tooth. After determining the type of rotation desired, either The Counter Clockwise or The Clockwise Wedge instrument is selected for the tooth you wish to move. The direction of rotation is determined by an occlusal view of the tooth  The appropriate Wedge indent into the aligner is created with a gentle squeeze of the instrument on the labial, near the line angle of the tooth, adjacent to the facial embrasure.  Then the same instrument is positioned on the lingual surface at the opposite line angle to create the rotational couple. By positioning the “plunger” portion of the Counter Clockwise or Clockwise Wedge instrument inside the aligner, an “outie” reservoir is created.  This can be filled with composite and cured to create a wedge attachment on the tooth to enhance tooth movement in a subsequent series of aligners. 

Read more less