Hu-Friedy

Used for waxing procedures and techniques. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.    

Read more less

Used for waxing procedures and techniques. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.    

Read more less

Used for waxing procedures and techniques. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised.    

Read more less

Used for waxing procedures and techniques. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.    

Read more less

3ssential Kit containing 3 WeRestore.it instruments: Spatula - CVKOT1X Posterior TNEXBKR1X Anterior TNCIPAOX Features Dark XTS ™ coating Improved visual acuity and less adhesion to sticky composite materials Smooth handle Ergonomic and lightweight to reduce hand fatigue

Read more less

Used for quick, accurate measurements during a crown lengthening procedure. Includes 1 Handle, 2 T-Bar Tips, and 2 Inline Tips. Processing Disassemble tip and handle. Clean, disinfect, and sterilize components. Replace tips with fading markings. Avoid disinfection with phenols or iodophors. Do not use dry heat for sterilization. Note: The tip will last for approximately 5 reprocessing cycles. Features Provides quick, accurate diagnosis of tooth proportion Provides accurate results and reduces chairside adjustment time Easy to read-reduces visual fatigue

Read more less

Plugger used to pack filling materials into cavity preparations (1.3 mm - 2.2 mm).    

Read more less

Condenser used to pack filling materials into cavity preparations (0.6 mm - 0.76 mm).    

Read more less

Plugger used to pack filling materials into cavity preparations.    

Read more less

Plugger used to pack filling materials into cavity preparations (2.0 mm - 3.0 mm).    

Read more less

Plugger used to pack filling materials into cavity preparations (2.2 mm - 3.0 mm).    

Read more less

Plugger used to pack filling materials into cavity preparations (1.2 mm - 1.5 mm).

Read more less

Condenser used to pack filling materials into cavity preparations (1.0 mm - 1.5 mm).    

Read more less

Plugger used to pack filling materials into cavity preparations (2.0 mm - 2.7 mm).

Read more less

Plugger used to pack filling materials into cavity preparations (1.0 mm - 1.6 mm).    

Read more less

Plugger used to pack filling materials into cavity preparations (1.8 mm - 2.4 mm).    

Read more less

Plugger used to pack filling materials into cavity preparations (0.9 mm - 1.2 mm).    

Read more less

Plugger used to pack filling materials into cavity preparations (0.6 mm - 1.2 mm).    

Read more less

Plugger used to pack filling materials into cavity preparations (2.5 mm).

Read more less

Plugger used to pack filling materials into cavity preparations (1.6 mm - 2.0 mm).    

Read more less

Plugger used to pack filling materials into cavity preparations (1.0 mm - 1.3 mm).      

Read more less

Plugger used to pack filling materials into cavity preparation (1.2 mm - 1.6 mm).    

Read more less

Plugger used to pack filling materials into cavity preparations.

Read more less

Condenser used to pack filling materials into cavity preparations (1.4 mm - 2.4 mm).

Read more less

Plugger used to pack filling materials into cavity preparations (1.4 mm - 2.0 mm).

Read more less

Plugger used to pack filling materials into cavity preparations (1.5 mm - 2.8 mm).

Read more less

Plugger used to pack filling materials into cavity preparations.

Read more less

Plugger used to pack filling materials into cavity preparations (0.5 mm).

Read more less

Plugger used to pack filling materials into cavity preparations (1.1 mm - 0.66 mm).

Read more less

Non-Serrated Condenser Used to pack filling materials into cavity preparations (1.5 mm - 2.5 mm).

Read more less

Plugger/Condenser used to pack filling materials into cavity preparations (1.5 mm - 2.0 mm).

Read more less

Ideal for waxing procedures and techniques, PKT1 features curved tapered tips used to flow on molten wax. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Ideal for waxing procedures and techniques, PKT1 features curved tapered tips used to flow on molten wax. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Ideal for waxing procedures and techniques, PKT4 is a modified carver used to perfect the external contours and remove excess wax at the cavo-surface margins. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instru Ideal for waxing procedures and techniques, PKT4 is a modified carver used to perfect the external contours and remove excess wax at the cavo-surface margins. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Plugger used to pack filling materials into cavity preparations (1.0 mm - 1.4 mm).

Read more less

Condenser used to pack filling materials into cavity preparations (1.0 mm - 1.4 mm).

Read more less

Ideal for waxing procedures and techniques, PKT2 features curved tapered tips used to flow on molten wax. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Ideal for waxing procedures and techniques, PKT2 features curved tapered tips used to flow on molten wax. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Ideal for waxing procedures and techniques, PKT36 features a pointed burnisher used to perfect and enhance the supplemental and developmental grooves. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, es Ideal for waxing procedures and techniques, PKT36 features a pointed burnisher used to perfect and enhance the supplemental and developmental grooves. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Ideal for waxing procedures and techniques, PKT3RM6 is similar to PKT3, but features a rounded tip vs. a pointed one. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be c Ideal for waxing procedures and techniques, PKT3RM6 is similar to PKT3, but features a rounded tip vs. a pointed one. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Condenser used to pack filling materials into cavity preparations (1.5 mm - 2.5 mm).

Read more less

Ideal for waxing procedures and techniques, PKT5 is a special carver used to remove excess wax as cusp ridges are developed; its contour maintains desired convexity at these ridges. Waxing instruments should never be heated to an extreme (glowing) or the Ideal for waxing procedures and techniques, PKT5 is a special carver used to remove excess wax as cusp ridges are developed; its contour maintains desired convexity at these ridges. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Highly polished stainless-steel instruments used for composite placement and contouring.Includes a 5-instrument cassette and all five ResinEight handle CompoSculp instruments: PFIDD1/28, PFIDD3/48, PFIDD5/68, PFIDD7/88, PFIDD9/108 and IM6053

Read more less

Replacement tips for Chu's Aesthetic Gauges. Processing Disassemble tip and handle. Clean, disinfect, and sterilize components. Replace tips with fading markings. Avoid disinfection with phenols or iodophors. Do not use dry heat for sterilization. Note: The tip will last for approximately 5 reprocessing cycles.

Read more less

Used for veneer restorations.

Read more less

Used for veneer restorations.

Read more less

Used for veneer restorations.

Read more less

The Minimally Invasive Kit features instrumentation designed specifically for microscopic dental procedures. The kit allows for maximum precision and accuracy under magnification. Features TNGMPI - Goldstein Micro Placement Instrument EXCKOT2 - 2 DE Excavator BBKOT2 - 2 DE Burnisher "Hammacher" CVIPCKOT4 - 4 IPC DE Carver EXKOT23 - 23 Explorer PFIKOT2 - 2 Kotschy Plastic Filling Inst PLGKOT2 - 2 DE Plugger Non-Serrated IM5107 - 10 Inst. Sig Cassette    

Read more less

Developed by Dr. Domenico Massironi, a pioneer in the field of operating microscope use in prosthesis, this kit is designed to be used under magnification. The kit allows for maximum precision and accuracy during prosthetic dentistry. Massironi Kit for Prosthodontic Procedures includes the following items; EXD16 - #1 DE Explorer, #6 Satin Steel Handle PCORTLINI - Cortellini, SE Laser probe, .5-15 CVIPCKOT4 - 4 IPC DE Carver TNMASS1 - Massironi, 1.2mm Spoon Chisel TNMASS2 - Massironi, 1.5mm Spoon Chisel GCPYD1 - #1 Yardley Gingival Cord Packer GCPBN1 - #BN1 Gingival Cord Packer TP32 - #32 Semkin-Taylor Tissue Pliers, Curved H3 - #3 Mosquito Hemostat, 12cm - Curved MH6 - #6 Mirror Handle MIR5HD - #5 HD Mouth Mirror IM5107C2 - 10 Inst Sig Series Cassette, Black Features A dark Aluminum Titanium Nitride (AlTiN) coating provides a smooth, hard surface which holds a sharp cutting edge. The dark coating, XTS™, also enhances visibility by providing high contrast and also reduces light reflection from operatory and microscope lights.

Read more less

For mixing materials and general laboratory use.

Read more less