Hu-Friedy

Used for laboratory waxing.

Read more less

Single-end long spatula. Large circumference handle offers more rapid, even mixing. Same spatula as (CSNT5) and (CSNT6).

Read more less

Combines the long, flexible spatula from (CSNT5) with an angled blade end to carry and load cement into a single crown or an inlay preparation. 7.4mm/2.2mm

Read more less

Short, rigid spatula for heavy cements. Blade end used to place cements or shape temporary restorations.

Read more less

Long, flexible spatula to mix medium body cements. Tapered fluted end scoops and loads mixed cement into crowns.

Read more less

25 mm Spatula used to mix and load cement and other materials into crowns or inlay/onlay preparations.

Read more less

Used for veneer restorations.

Read more less

Used for veneer restorations.

Read more less

44 mm Spatula with flexible blade for mixing medium body cements and other materials into crowns or inlay/onlay preparations.

Read more less

51 mm Spatula with rigid blade for mixing heavier or medium body cements and other materials into crowns or inlay/onlay preparations.

Read more less

Used for veneer restorations.

Read more less

For anterior teeth. Sharp, thin blade allows access to all surfaces. The offset angle provides universal adaptability. 1.8mm

Read more less

Combines a sickle-shaped scaler with a flat blade for removal of excess resin, cement, or porcelain flash. The narrow chisel removes excess interproximal material with a push stroke.

Read more less

Used for veneer restorations.

Read more less

For posterior teeth. Thin, sharp offset angle provides access to surfaces where linear finishing strips would not be effective. 2.0mm

Read more less

10-7-14 Hatchets used for cavity preparation: retentive areas, internal line angles and removing hard caries. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

15-8-12 Hatchets used for cavity preparation: retentive areas, internal line angles and removing hard caries. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

10-6-12 Hatchets used for cavity preparation: retentive areas, internal line angles and removing hard caries. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

Used for cavity preparation: retentive areas, internal line angles and removing hard caries. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

Used for cavity preparation: retentive areas, internal line angles and removing hard caries. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

Used for cavity preparation: retentive areas, internal line angles and removing hard caries. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

Used for cavity preparation: retentive areas, internal line angles and removing hard caries.1.5mm/1.5mm [15-10-16] Part of the Tucker 8 Instrument Kit Used for cavity preparation: retentive areas, internal line angles and removing hard caries.

Read more less

10-6-14 Hatchets used for cavity preparation: retentive areas, internal line angles and removing hard caries. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

Used for cavity preparation: retentive areas, internal line angles and removing hard caries.1.5mm/1.5mm [15-10-16] Part of the Tucker 8 Instrument Kit Used for cavity preparation: retentive areas, internal line angles and removing hard caries.

Read more less

15-8-14 Hatchet used for cavity preparation: retentive areas, internal line angles and removing hard caries. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

20-9-14 Hatchets used for cavity preparation: retentive areas, internal line angles and removing hard caries. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

15-8-14 Hatchets used for cavity preparation: retentive areas, internal line angles and removing hard caries. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

15-8-14 Hatchet used for cavity preparation: retentive areas, internal line angles and removing hard caries. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

The Composite Kit features instrumentation designed specifically for restorative dentistry applications. The Composite Kit for restorative procedures consists of 9 Hu-Friedy instruments which provide dynamic results in restorative dentistry.   Features MH6 - Cone Socket Mirror Handle MIR5DS - 5 Double-Sided Mirror EXC186 - 18 Excavator, Satin Steel Handle TNCIGFT1 - 1 XTS Goldstein Flexi-Thin TNBB27/29 - 27/29 Burnisher TNCIGFT3 - 3 XTS Goldstein Flexi-Thin TNPFIG4/5 - XTS 4/5 Gregg Off-Angle Composite Instrument TNCVIPC - IPC Interproximal XTS Carver SP60616 - Mini Spatula and Placement Instrument, #6 handle IM5107 - 10 Instrument Signature Series Cassette, Black"

Read more less

Used for quick, accurate measurements during a crown lengthening procedure. Includes 1 Handle, 2 BLPG Tips, and 2 Papilla Tips. Processing Disassemble tip and handle. Clean, disinfect, and sterilize components. Replace tips with fading markings. Avoid disinfection with phenols or iodophors. Do not use dry heat for sterilization. Note: The tip will last for approximately 5 reprocessing cycles. Features Precise color-coded measurements Provides quick, accurate measurements and better results Easy to read, reduces visual fatigue

Read more less

Used for accurate measurements for metal and porcelain.

Read more less

Used for accurate measurements for wax.

Read more less

Replacement tips for Chu's Aesthetic Gauges. Processing Disassemble tip and handle. Clean, disinfect, and sterilize components. Replace tips with fading markings. Avoid disinfection with phenols or iodophors. Do not use dry heat for sterilization. Note: The tip will last for approximately 5 reprocessing cycles.

Read more less

The Bolet Gauge helps in determining tooth dimensions of length, width, and thickness in millimeter increments. It is used for measuring teeth and spaces. The flat end is good for measuring teeth size and distance of spaces in the mouth.    

Read more less

Designed to condense, smooth, carve and polish amalgam.

Read more less

Designed to condense, smooth, carve and polish amalgam.

Read more less

Designed to condense, smooth, carve and polish amalgam (2.1 mm - 1.3 mm).

Read more less

Designed to condense, smooth, carve and polish amalgam (2.6 mm - 1.5 mm).

Read more less

Designed to condense, smooth, carve and polish amalgam (2.6 mm).

Read more less

Designed to condense, smooth, carve and polish amalgam (2.4 mm - 1.6 mm).

Read more less

Highly polished stainless steel instruments used for composite placement and contouring (2.7 mm - 1.7 mm).

Read more less

Designed to condense, smooth, carve and polish amalgam (2.6 mm - 3.1 mm).

Read more less

Akro-Flex is a flexible, ultra-thin composite instrument. By incorporating Nickel Titanium, a material known for its super elasticity, the instrument acts as a solid brush. Working ends are delicate and should not be flexed greater than 45° during use. Contains: One AKRO-FLEX and one 5-instrument IMS Signature Series cassette, blue (IM6058) Hyper-thin working ends reach narrow interproximal spaces with ease. These resilient tips are also excellent when creating fine anatomical detail with delicate, artistic strokes during aesthetic restorations. View other Akro-Flex kit option! AKRO-INFIN Features Ductile Materials - Nickel Titanium (NiTi), known for its super-elasticity and shape memory effect, allow Akro-Flex to be used as a solid brush.Hyper-thin Profile - Akro-Flex's design allows it to reach narrow, confined interdental spaces with ease all while retaining its original shape thanks to the NiTi tip.Smooth, Ergonomic Handle - Ergonomically designed for an enhanced grip and less hand fatigue.

Read more less

For mixing materials and general laboratory use.

Read more less

Used to hold veneer or crown in place while carving away soft cement.

Read more less

Used to hold veneer or crown in place while carving away soft cement.

Read more less

The Tucker 8 Kit was created in conjunction with the Tucker Study Club and is a comprehensive kit containing four unique Margin Trimmers and four unique Hatchets for various cosmetic dentistry procedures. The Tucker 8 Kit was created in conjunction with the Tucker Study Club. The Tucker Study Club’s mission is to elevate and sustain the professional character and education of operative dentists through the formation of operating study clubs to include both a clinical and didactic component; to encourage innovation and demonstrate clinical excellence during study club, mentoring, annual meetings and in every day practice; to advance the Tucker technique of precise cast and direct gold as our preferred method of restoration and to consider other restorative materials which may provide appropriate, life long restorations; and to provide an opportunity to nurture and educate the next generation of dentists with humility and grace. Additional information on the Tucker Study Club can be found at arvtsc.org Features MT232TM9 - 232 TruBal Margin Trimmer #9Hdl MT233TM9 - 233 TruBal Margin Trimmer #9Hdl MT232TBM9 - 232 Tucker Margin Trimmer #9Hdl MT233TBM9 - 233 Tucker Margin Trimmer #9Hdl CP14/14-09 - 14/14-0 DE Hatchet (15-10-16) #9Hdl CP15/15-09 - 15/15-0 DE Hatchet (15-10-16) #9Hdl CP44S9 - 44S Off-Angle Cavity Prep #9Hdl CP45S9 - 45S Off-Angle Cavity Prep #9Hdl IM5109 - 10 Inst. Sig Cassette Green    

Read more less

Complete Posterior XTS™ Instrument set for composite procedures. Kit includes the following XTS composite instruments: TNCIFIM/L TNPLGH3 TNPLG0T TNPLG5A TNCFISS/M Advanced technology and innovative design have enabled Hu-Friedy to produce a superior composite instrument: Satin Steel™ XTS™. XTS composite instruments allow for exceptional non-stick placement of materials without discoloring the restoration. Studies indicate Aluminum Titanium Nitride (AlTiN) coatings are consistently harder, smoother and stick less as compared to Titanium coatings. Additionally, Hu-Friedy XTS instruments are made from Immunity Steel™ for longer life. XTS Instruments Features & Benefits: Distinctive Black Finish, Enhanced contrast between instrument, tooth structure and composite material. The black finish will not flake or discolor the restoration. Unique Smooth, Large, Lightweight Handle Design, Easy clean-up, maximum comfort, reduced hand fatigue and an increased level of control. Quality Craftsmanship & Variety of Designs, Satin Steel XTS instruments offer unsurpassed performance and an extensive assortment of designs for all composite placement needs. Source: Gerwatowski, L.J., McFall, D.B., Stach, D.: Carpal Tunnel Syndrome; Risk Factors and Preventive Strategies for the Dental Hygienist. Journal of Dental Hygiene, February 1992.

Read more less