Hu-Friedy

Used to carve anatomical features and trim excess materials.

Read more less

Extremely thin, flexible blade. Off-angle provides better access to posterior areas. Highly polished stainless steel instruments used for composite placement and contouring.

Read more less

Used to carve anatomical features and trim excess materials.

Read more less

WeRestore.it spatula with dark XTS coating. XTS composite instruments allow for exceptional non-stick placement of materials without discoloring the restoration. Studies indicate Aluminum Titanium Nitride (AlTiN) coatings are consistently harder, smoother and stick less as compared to Titanium coatings. Additionally, Hu-Friedy XTS instruments are made from Immunity Steel™ for longer life. XTS Instruments Features & Benefits: Distinctive Black Finish:- Enhanced contrast between instrument, tooth structure, and composite material. The black finish will not flake or discolor the restoration. Unique Smooth, Large, Lightweight Handle Design:- Easy clean-up, maximum comfort, reduced hand fatigue, and an increased level of control.* Quality Craftsmanship & Variety of Designs:- Satin Steel XTS instruments offer unsurpassed performance and an extensive assortment of designs for all composite placement needs. * Source: Gerwatowski, L.J., McFall, D.B., Stach, D.: Carpal Tunnel Syndrome; Risk Factors and Preventive Strategies for the Dental Hygienist. Journal of Dental Hygiene, February 1992.

Read more less

Spatula 350? This spatula can be used for: • Applying composite materials • Retracting the gingiva in preparation for a prosthetic • Inserting retraction cord Minimally invasive Instruments have exceptionally fine working ends which aid the clinician when working under a magnifying glass or microscope. Designed for both minimally invasive and microscopic dental procedures, these instruments can be used up to magnification of 25x. Developed by Key Opinion Leader Prof. Dr. Peter Kotschy

Read more less

Used to carve anatomical features and trim excess materials.

Read more less

The unique curvature of this instrument makes it ideal for shaping anterior lingual surfaces. Minimally invasive Instruments have exceptionally fine working ends which aid the clinician when working under a magnifying glass or microscope. Designed for both minimally invasive and microscopic dental procedures, these instruments can be used up to magnification of 25x. Developed by Key Opinion Leader Prof. Dr. Peter Kotschy

Read more less

This spatula allows for access into tight interproximal spaces for a wide variety of applications. Minimally invasive Instruments have exceptionally fine working ends which aid the clinician when working under a magnifying glass or microscope. Designed for both minimally invasive and microscopic dental procedures, these instruments can be used up to magnification of 25x. Developed by Key Opinion Leader Prof. Dr. Peter Kotschy

Read more less

Design characteristics similar to 1/2 Hollenback but with slightly larger blades.

Read more less

Used to carve anatomical features and trim excess materials.

Read more less

Used to carve anatomical features and trim excess materials.

Read more less

Extremely thin curved blade; ideal for adapting to interproximal surfaces.

Read more less

Used to carve anatomical features and trim excess materials.

Read more less

Adapts to natural tooth curvature and left and right-side dental anatomy. Concave edge reduces mesial and distal flash on margins. Convex side is a conventional cleoid carver. Tungsten carbide tips cut easily through all composite materials, cured or uncured, without streaking or discoloration. TC Carvers easily remove orthodontic bracket adhesives and are ideal for carving amalgam and composite materials.

Read more less

Used to carve anatomical features and trim excess materials.

Read more less

Used to carve anatomical features and trim excess materials.

Read more less

Used to carve anatomical features and trim excess materials.

Read more less

Used to carve anatomical features and trim excess materials.

Read more less

Used to carve anatomical features and trim excess materials.

Read more less

Standard discoid-cleoid configuration for shaping occlusal surfaces, contouring and carving. Tungsten carbide tips cut easily through all composite materials, cured or uncured, without streaking or discoloration. TC Carvers easily remove orthodontic bracket adhesives and are ideal for carving amalgam and composite materials.

Read more less

Thin blade and rounded contour facilitates use in both thick and thin tissues without catching or dropping cord. Bilateral notch allows placement in limited access areas. 2.2mm Use serrated cord packers only when using braided cord. Serrations are available upon request.

Read more less

For atraumatic and accurate cord placement. Also available non-serrated 113 (GCP113NS). 1.8mm Use serrated cord packers only when using braided cord. Serrations are available upon request.

Read more less

0.8mm COLUMBIA DESIGN These Columbia-shaped excavators are useful when working on root surfaces of an irregularly shaped tooth or bone region Under magnification of 6.5x or higher, standard excavators become too large and therefore cannot be used in microdentistry. These excavators have been designed with especially fine tips so they are suitable for use with microscopes and magnifying glasses. The Wiland shape and Columbia shape were replicated in these excavators’ designs. The working ends were paired with a larger diameter handle for better grip and increased comfort. Developed by Key Opinion Leader Prof. Dr. Peter Kotschy

Read more less

1.0mm COLUMBIA DESIGN These Columbia-shaped excavators are useful when working on root surfaces of an irregularly shaped tooth or bone region Under magnification of 6.5x or higher, standard excavators become too large and therefore cannot be used in microdentistry. These excavators have been designed with especially fine tips so they are suitable for use with microscopes and magnifying glasses. The Wiland shape and Columbia shape were replicated in these excavators’ designs. The working ends were paired with a larger diameter handle for better grip and increased comfort. Developed by Key Opinion Leader Prof. Dr. Peter Kotschy

Read more less

1.3mm WILAND DESIGN The Wiland shape of these instruments allows the clinician to easily access interdental spaces, cavities and overlapping structures. Under magnification of 6.5x or higher, standard excavators become too large and therefore cannot be used in microdentistry. These excavators have been designed with especially fine tips so they are suitable for use with microscopes and magnifying glasses. The Wiland shape and Columbia shape were replicated in these excavators’ designs. The working ends were paired with a larger diameter handle for better grip and increased comfort. Developed by Key Opinion Leader Prof. Dr. Peter Kotschy

Read more less

Small and thin non-serrated blade shape for atraumatic and accurate cord placement. Use serrated cord packers only when using braided cord. Serrations are available upon request.

Read more less

For atraumatic and accurate cord placement. Also available serrated 113 (GCP113). Use serrated cord packers only when using braided cord. Serrations are available upon request.

Read more less

0.2mm The petite working ends of these explorers provide clinicians with enhanced visibility and maneuverability for more accurate detections and diagnoses. The unique angles of the shanks allow for better access in difficult to reach and small areas. Minimally invasive Instruments have exceptionally fine working ends which aid the clinician when working under a magnifying glass or microscope. Designed for both minimally invasive and microscopic dental procedures, these instruments can be used up to magnification of 25x. Developed by Key Opinion Leader Prof. Dr. Peter Kotschy

Read more less

1.3mm STRAIGHT EXCAVATOR These excavators are used frequently in minimally invasive dentistry, especially when a long shank is needed — such as when removing caries in deep pockets or removing granulation tissue. Under magnification of 6.5x or higher, standard excavators become too large and therefore cannot be used in microdentistry. These excavators have been designed with especially fine tips so they are suitable for use with microscopes and magnifying glasses. The Wiland shape and Columbia shape were replicated in these excavators’ designs. The working ends were paired with a larger diameter handle for better grip and increased comfort. Developed by Key Opinion Leader Prof. Dr. Peter Kotschy

Read more less

1.0mm WILAND DESIGN The Wiland shape of these instruments allows the clinician to easily access interdental spaces, cavities and overlapping structures. Under magnification of 6.5x or higher, standard excavators become too large and therefore cannot be used in microdentistry. These excavators have been designed with especially fine tips so they are suitable for use with microscopes and magnifying glasses. The Wiland shape and Columbia shape were replicated in these excavators’ designs. The working ends were paired with a larger diameter handle for better grip and increased comfort. Developed by Key Opinion Leader Prof. Dr. Peter Kotschy

Read more less

For atraumatic and accurate cord placement. Also available non-serrated CSI-1 (GCPCSI1NS). Use serrated cord packers only when using braided cord. Serrations are available upon request.

Read more less

1.0mm STRAIGHT EXCAVATOR These excavators are used frequently in minimally invasive dentistry, especially when a long shank is needed — such as when removing caries in deep pockets or removing granulation tissue. Under magnification of 6.5x or higher, standard excavators become too large and therefore cannot be used in microdentistry. These excavators have been designed with especially fine tips so they are suitable for use with microscopes and magnifying glasses. The Wiland shape and Columbia shape were replicated in these excavators’ designs. The working ends were paired with a larger diameter handle for better grip and increased comfort. Developed by Key Opinion Leader Prof. Dr. Peter Kotschy

Read more less

0.8mm WILAND DESIGN The Wiland shape of these instruments allows the clinician to easily access interdental spaces, cavities and overlapping structures. Under magnification of 6.5x or higher, standard excavators become too large and therefore cannot be used in microdentistry. These excavators have been designed with especially fine tips so they are suitable for use with microscopes and magnifying glasses. The Wiland shape and Columbia shape were replicated in these excavators’ designs. The working ends were paired with a larger diameter handle for better grip and increased comfort. Developed by Key Opinion Leader Prof. Dr. Peter Kotschy

Read more less

For atraumatic and accurate cord placement. Also available serrated CSI-1 (GCPCSI1). Use serrated cord packers only when using braided cord. Serrations are available upon request.

Read more less

1.3mm COLUMBIA DESIGN These Columbia-shaped excavators are useful when working on root surfaces of an irregularly shaped tooth or bone region Under magnification of 6.5x or higher, standard excavators become too large and therefore cannot be used in microdentistry. These excavators have been designed with especially fine tips so they are suitable for use with microscopes and magnifying glasses. The Wiland shape and Columbia shape were replicated in these excavators’ designs. The working ends were paired with a larger diameter handle for better grip and increased comfort. Developed by Key Opinion Leader Prof. Dr. Peter Kotschy

Read more less

Goldstein Crown Remover, 90°

Read more less

For permanent removal of anterior crowns by breaking the seal between tooth and crown after sectioning with a bur. 4.0mm

Read more less

For atraumatic and accurate cord placement. Also available non-serrated 7 Guyer (GCPG7NS). Use serrated cord packers only when using braided cord. Serrations are available upon request.

Read more less

Ideal blade thickness with angle and blade shapes with similar to the IPC carver. 1.8mm Use serrated cord packers only when using braided cord. Serrations are available upon request.

Read more less

Goldstein Crown Remover, 45°

Read more less

Protects tissue during cavity preparations and placement of composite restorations. The concave crescent shape of the gingival retractors conform to root surfaces and gingival tissues. Also useful for placement of rubber dam around the cervical margins of teeth.

Read more less

For occlusal separation especially in hard-to remove crowns that have been bonded to the tooth.

Read more less

Round non-serrated working end for atraumatic and accurate cord placement.2.1mm Use serrated cord packers only when using braided cord. Serrations are available upon request.

Read more less

For atraumatic and accurate cord placement. Use serrated cord packers only when using braided cord. Serrations are available upon request.

Read more less

Design holds most manufacturers» disposable brush inserts. Also excellent for sealant. Made of Immunity Steel™ to allow for autoclave steam sterilization.

Read more less

For maxillary and mandibular premolars and canines. Also maxillary lateral incisors; protects tissue during cavity preparations and placement of composite restorations. The concave crescent shape of the gingival retractors conform to root surfaces and gingival tissues. Also useful for placement of rubber dam around the cervical margins of teeth.

Read more less

For maxillary central incisors and wide canines; protects tissue during cavity preparations and placement of composite restorations. The concave crescent shape of the gingival retractors conform to root surfaces and gingival tissues. Also useful for placement of rubber dam around the cervical margins of teeth.

Read more less

For all molars; protects tissue during cavity preparations and placement of composite restorations. The concave crescent shape of the gingival retractors conform to root surfaces and gingival tissues. Also useful for placement of rubber dam around the cervical margins of teeth.

Read more less