Products

Heavy Shank - Special blade angulations for long bevel incisions. Oval blade shape allows use of inner portion in retro-molar region.

Read more less

For atraumatic and accurate cord placement. Use serrated cord packers only when using braided cord. Serrations are available upon request.

Read more less

For atraumatic and accurate cord placement. Also available non-serrated 7 Guyer (GCPG7NS). Use serrated cord packers only when using braided cord. Serrations are available upon request.

Read more less

Used during a sinus lift procedure to separate/reflect the Schneiderian membrane from the maxillary bone and to elevate the membrane.    

Read more less

The 7 Bernard elevator is also referred to as a syndesmotome and can be used as a periotome or to elevate small roots with a concave surface that is approximately 3.6mm wide. The angled design of the BER7 is best suited for posterior teeth. Made of surgical grade stainless steel.

Read more less

Mini blade scalpel handle used for cutting gingival tissue and making surgical incisions. HuFriedyGroup offers microsurgical blades: MB63 - Mini Full Radius Scalpel Blade, Sterile MB64 - Mini Single Edge Scalpel Blade, Sterile MB67 - Mini Curved Edge Scalpel Blade, Sterile MB69 - Mini Full Radius Round Scalpel Blade, Sterile MIM64 - Micro Single Edge Scalpel Blade, Sterile and microsurgical mirrors: MM4 - Micro Mirror Round 3.0 mm MM5 - Micro Mirror Round 5.0 mm MM7 - Micro Mirror 2 mm x 7 mm MM8 - Micro Mirror 3 mm x 9 mm Blade/mirror wrench also available MBW - Micro-Mini and Mini Scalpel Blade Wrench

Read more less

Short, rigid spatula for heavy cements. Blade end used to place cements or shape temporary restorations.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

The 7 Scalpel Handle is a is used for cutting gingival tissue and making surgical incisions. Features a 6.4" flat handle. Made of surgical grade stainless steel.

Read more less

Used for waxing procedures and techniques. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.    

Read more less

For mixing materials and general laboratory use. Wood handles are not compatible with heat sterilization. Hu-Friedy recommends autoclave steam sterilization.    

Read more less

For mixing materials and general laboratory use.

Read more less

7.5 mm Osteotome used for cutting or preparing bone with 7-10-13-15-18 mm markings.

Read more less

7.5 mm Osteotome used for cutting or preparing bone with 7-10-13-15-18 mm markings.

Read more less

15 20 Chisels used to refine the cavity preparation. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

7/8 After Five™ Gracey Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 7/8 After Five™ Gracey Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

Extra rigid Gracey curettes, medium contra-angle for premolars and molars, facial and lingual surfaces. Double-ended, easy-grip handle. Extra Rigid Gracey curettes are ideal for tenacious calculus removal, gross scaling, and initial debridement. Blades, however, are identical in size to standard Gracey curettes. Hu-Friedy manufactures a variety of Gracey styles and patterns, such as After Five™ curettes with a longer terminal shank and thinned blade, Mini Five™ curettes with After Five™   Features Offset blade provides a perfect working angulation for the tooth surface. Offset blade angulation means only the lower cutting edge of each blade is used.

Read more less

7/8 Gracey Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37 Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 7/8 Gracey Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

7/8 Micro Mini Five™ Gracey Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 7/8 Micro Mini Five™ Gracey Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

Instrumentation & Procedural|Hand Scaling|Gracey Curettes|Mini Five™ Gracey Curettes Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 7/8 Mini Five™ Gracey Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

Buccal Lingual. Cutting edge blades, extended shank. These unique curettes are used after ultrasonic scaling for gentle removal of residual deposits and for smoothing the root surface. Ideal for furcations, developmental grooves and line angles. Entire edge of the blade is a cutting edge enabling a push or pull stroke in all directions- vertical, horizontal or oblique. Shanks are extended for easy access into deep pockets.

Read more less

Shorter, thinner, smaller blade honed at a 60 degree angle. Modified rigid shank. Double-ended handle. Following initial scaling and root planing or surgery, the gingiva tightens as it heals and there may be areas of recession and/or residual pocket depth. These areas require a smaller and thinner curette blade to insert subgingivally on most periodontal maintenance patients. In collaboration with Hu-Friedy, Anna Pattison designed the new Periodontal Maintenance Gracey curettes with these challenges in mind. Features Thinner, smaller blades Modified Rigid Shank Easier Access and insertion under tight tissue EverEdge™ blade

Read more less

7/8 Rigid After Five™ Gracey Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied t Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 7/8 Rigid After Five™ Gracey Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

7/8 Rigid Gracey Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 7/8 Rigid Gracey Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

Rigid Mini Five. Longer terminal shank, standard diameter. Thinner blade.

Read more less

Instrumentation & Procedural|Hand Scaling|Gracey Curettes|Mini Five™ Gracey Curettes Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 7/8 Rigid Mini Five™ Gracey Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

7/8 Younger-Good Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 7/8 Younger-Good Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

Used to dislodge heavy supramarginal calculus deposits. Use a pull stroke.

Read more less

Used during a sinus lift procedure to separate/reflect the Schneiderian membrane from the maxillary bone and to elevate the membrane.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Used during a sinus lift procedure to separate/reflect the Schneiderian membrane from the maxillary bone and to elevate the membrane.

Read more less

Atraumair 73 Forceps are used to extract lower Molars.

Read more less

Extraction forceps are ideal for extracting teeth from the alveolar bone. All hinged instruments should be cleaned and sterilized in an open position.

Read more less

Diamond Dusted 73 Forceps are used to extract lower Molars. A light diamond coating allows for 20% greater grip as compared to traditional forceps. The light diamond coating increases resistance between the forceps and tooth surface providing enhanced engagement. Thin, tapered beak designs provide improved intraoral vision and access as compared to traditional forceps. Diamond Dusted Forceps have a matte finish for additional contrast and reduced light reflection. Their unique hole design reduces weight of the forceps, providing increased comfort and control. Laser marking on the hinge is visibility when bagged for sterilization. Features Lifetime warranty against defects in material and workmanship Surgical grade stainless steel promotes longevity and corrosion resistance Straight, conical beaks designed to adapt to upper anterior incisors and canines

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Extraction forceps are ideal for extracting teeth from the alveolar bone. All hinged instruments should be cleaned and sterilized in an open position.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Lower Anteriors forceps used to extract teeth from alveolar bone. Thin, tapered and sharp parallel beaks improve root and crown contact and longitudinal serrations provide additional grip. The design of Apical Forceps facilitates an atraumatic tooth extraction.    

Read more less

Lower Roots Serrated Forceps used for extracting teeth from the alveolar bone. Extraction forceps are ideal for extracting teeth from the alveolar bone. All hinged instruments should be cleaned and sterilized in an open position.    

Read more less

The 75 Kramer-Nevins Chisel is is designed for contiguous bone graft procedures, compacting bony walls after bone grafting, and is useful for removal of exostosis and tori. Chisel has a 7.5mm mono-beveled tip. Made with surgical grade stainless steel.  

Read more less

Upper Roots Serrated Forceps used for extracting teeth from the alveolar bone. Extraction forceps are ideal for extracting teeth from the alveolar bone. All hinged instruments should be cleaned and sterilized in an open position.    

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

15-96-8-12 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

15-96-8-12 Margin Trimmer used to produce proper bevel on enamel margins. Similar to a hatchet except the blade is curved and the cutting edge angled. Cutting instruments need to be kept sharp. Hu-Friedy offers sharpening services for all cutting instruments.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Lower 3rd Molars Forceps used to extract teeth from alveolar bone. Extraction forceps are ideal for extracting teeth from the alveolar bone.    

Read more less

Lower third Molar Forceps used for extracting teeth from the alveolar bone.

Read more less