Products

Lower Molars Forceps used to extract teeth from alveolar bone.    

Read more less

End-cutting rongeurs used for trimming and recontouring alveolar bone and gross tissue removal.

Read more less

Mini blade scalpel handle used for cutting gingival tissue and making surgical incisions HuFriedyGroup offers microsurgical blades: MB63 - Mini Full Radius Scalpel Blade, Sterile MB64 - Mini Single Edge Scalpel Blade, Sterile MB67 - Mini Curved Edge Scalpel Blade, Sterile MB69 - Mini Full Radius Round Scalpel Blade, Sterile MIM64 - Micro Single Edge Scalpel Blade, Sterile and microsurgical mirrors: MM4 - Micro Mirror Round 3.0 mm MM5 - Micro Mirror Round 5.0 mm MM7 - Micro Mirror 2 mm x 7 mm MM8 - Micro Mirror 3 mm x 9 mm Blade/mirror wrench also available MBW - Micro-Mini and Mini Scalpel Blade Wrench

Read more less

Double-ended probe. Round, stainless steel handle. 3N Nabers. Hu-Friedy probes are used to assess periodontal pocket depths, attachment levels, anatomy configurations and gingival bleeding. Our Nabers probes are ideal for accessing furcation areas.    

Read more less

Ideal for waxing procedures and techniques, PKT3RM6 is similar to PKT3, but features a rounded tip vs. a pointed one. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be c Ideal for waxing procedures and techniques, PKT3RM6 is similar to PKT3, but features a rounded tip vs. a pointed one. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

Design characteristics similar to 1/2 Hollenback but with slightly larger blades.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Plugger used to pack filling materials into cavity preparations (1.6 mm - 2.0 mm).    

Read more less

The 3X Miller-Colburn cross-cut bone file is used for final smoothing and shaping of bone with 6.2mm and 4.8mm working ends. The 3X Miller-Colburn bone file is used for final smoothing and shaping of bone. The bone file is a curved working end combined with a small paddle-shaped working end. Cross-Cut files increase efficiency by cutting in two directions. Working ends are 6.2mm and 4.8mm wide. Smaller working end is at a 25 degree angle. Made of surgical grade stainless steel.    

Read more less

The 4 Buser Chisel is used to section/split teeth and remove bone and features a 4mm pointed tip. Made from surgical grade stainless steel.

Read more less

The 4 Chandler Bone Chisel is used to shave bone with a 5mm mono-bevel tip. Made with surgical grade stainless steel.    

Read more less

Used to carve anatomical features and trim excess materials.

Read more less

End-cutting rongeurs used for trimming and recontouring alveolar bone and gross tissue removal. ____3.6mm ___14cm    

Read more less

Single-sided European simple stem mirror. 7/8 in (22mm) diameter. Hu-Friedy Rhodium-coated mirror are made to be scratch resistant & the front surface mirrors provide sharp and distortion free images with a smooth finish for patient comfort.    

Read more less

The 4 Fedi Chisel is used for incisions that remove or recontour soft tissue, and is also useful to excise interproximal tissue. Fedi chisels are also designed to make secondary sulcular incisions in flap procedures and facilitate removal of remaining fibers on tooth. Made from surgical grade stainless steel for longevity and corrosion resistance. Chisel is 3.3mm wide and has a 50 degree angle.    

Read more less

Reverse double-end blades with ideal width and length for initial placement and carving of composite. Can also be used for packing gingival retraction cord. Application: Class III, IV    

Read more less

Single-sided Cone Socket mirror. 7/8 in. (22mm) diameter. Rhodium-coated to resist scratching, Hu-Friedy's front surface mirrors provide sharp and distortion free images with a smooth finish for patient comfort. Features Rhodium coating to resist scratching Front surface for sharp, distortion free images Smoothly finished for patient comfort

Read more less

Used when working near or at interproximal areas. Straight end compacts composite material, while sharp knife edge cuts composite to avoid bonding to adjacent tooth. 4.7mm/4.3mm Advanced technology and innovative design have enabled Hu-Friedy to produce a superior composite instrument: Satin Steel™ XTS™. XTS composite instruments allow for exceptional non-stick placement of materials without discoloring the restoration. Studies indicate Aluminum Titanium Nitride (AlTiN) coatings are consistently harder, smoother and stick less as compared to Titanium coatings. Additionally, Hu-Friedy XTS instruments are made from Immunity Steel™ for longer life. XTS Instruments Features & Benefits: Distinctive Black Finish ? Enhanced contrast between instrument, tooth structure and composite material. The black finish will not flake or discolor the restoration. Unique Smooth, Large, Lightweight Handle Design ? Easy clean-up, maximum comfort, reduced hand fatigue and an increased level of control.* Quality Craftsmanship & Variety of Designs ? Satin Steel XTS instruments offer unsurpassed performance and an extensive assortment of designs for all composite placement needs. Source: Gerwatowski, L.J., McFall, D.B., Stach, D.: Carpal Tunnel Syndrome; Risk Factors and Preventive Strategies for the Dental Hygienist. Journal of Dental Hygiene, February 1992.

Read more less

Flexible, paired, offset, paddle-shaped blades for placing and shaping material on posterior, mesial and distal surfaces. Advanced technology and innovative design have enabled Hu-Friedy to produce a superior composite instrument: Satin Steel™ XTS™. XTS composite instruments allow for exceptional non-stick placement of materials without discoloring the restoration. Studies indicate Aluminum Titanium Nitride (AlTiN) coatings are consistently harder, smoother and stick less as compared to Titanium coatings. Additionally, Hu-Friedy XTS instruments are made from Immunity Steel™ for longer life. XTS Instruments Features & Benefits: Distinctive Black Finish - Enhanced contrast between instrument, tooth structure and composite material. The black finish will not flake or discolor the restoration. Unique Smooth, Large, Lightweight Handle Design - Easy clean-up, maximum comfort, reduced hand fatigue and an increased level of control. Quality Craftsmanship & Variety of Designs - Satin Steel XTS instruments offer unsurpassed performance and an extensive assortment of designs for all composite placement needs. Source: Gerwatowski, L.J., McFall, D.B., Stach, D.: Carpal Tunnel Syndrome; Risk Factors and Preventive Strategies for the Dental Hygienist. Journal of Dental Hygiene, February 1992.    

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas. The Heidbrink root tip picks are designed for delicate root teasing procedures. They are also available in a "heavy" pattern for more substantial root tip removal procedures.    

Read more less

Plugger used to pack filling materials into cavity preparations (1.8 mm - 2.4 mm).    

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas.

Read more less

3 mm Bone grafting plugger used during grafting procedures.    

Read more less

For all molars; protects tissue during cavity preparations and placement of composite restorations. The concave crescent shape of the gingival retractors conform to root surfaces and gingival tissues. Also useful for placement of rubber dam around the cervical margins of teeth.

Read more less

Luxating elevators have thin, sharp blades that are used to cut periodontal ligaments. The luxating elevator is used by rocking and cutting vs. an elevator that lifts and pries. Luxating elevators reduce putting pressure on adjacent teeth.    

Read more less

4 mm Osteotome used for cutting or preparing bone with 7-10-13-15-18 mm markings.    

Read more less

Luxating elevators have thin, sharp blades that are used to cut periodontal ligaments. The luxating elevator is used by rocking and cutting vs. an elevator that lifts and pries. Luxating elevators reduce putting pressure on adjacent teeth.    

Read more less

4 mm Osteotome used for cutting or preparing bone with 7-10-13-15-18 mm markings.

Read more less

The 4 Molt Left surgical curette is designed for curettage, cyst removal and tooth socket debridement with 6.4mm working ends. Curette is angled for improved access to posterior. Made with surgical grade stainless steel.

Read more less

The 4 Molt Right surgical curette is designed for curettage, cyst removal and tooth socket debridement with 6.4mm working ends. Curette is angled for improved access to posterior. Made with surgical grade stainless steel.    

Read more less

The 4 Molt surgical curette is designed for curettage, cyst removal and tooth socket debridement with 7mm working ends. Made with surgical grade stainless steel.    

Read more less

Nevi™ 4 Posterior Scaler with Harmony™ Ergonomic Scaler handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth u Harmony™ Ergonomic Scalers are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 4 Nevi™ Posterior Scaler is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

Nevi™ 4 Posterior Scaler, Lite, with Harmony™ Ergonomic Scaler handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the Harmony™ Ergonomic Scalers are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 4 Nevi™ Lite Posterior Scaler is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

Plugger used to pack filling materials into cavity preparations (2.0 mm - 3.0 mm).    

Read more less

4.2 mm Osteotome used for preparing bone. 7-10-13-15-18mm Used to separate and lift the cortical bone (green stick fracture) or spread the bone laterally when inserted into the pilot hole.    

Read more less

Ideal for waxing procedures and techniques, PKT4 is a modified carver used to perfect the external contours and remove excess wax at the cavo-surface margins. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instru Ideal for waxing procedures and techniques, PKT4 is a modified carver used to perfect the external contours and remove excess wax at the cavo-surface margins. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.

Read more less

For severing the periodontal ligament. 1.5mm All periosteals come with the handle shown unless additional options are listed.    

Read more less

The 4 Scalpel Handle is used for cutting gingival tissue and making surgical incisions.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.    

Read more less

Used for waxing procedures and techniques. Waxing instruments should never be heated to an extreme (glowing) or the strength of the instrument, especially the thin tips, will be compromised. Maintenance Tip: Do not expose instruments to temperatures in excess of 350° F/176.6° C. Repeated heating to extreme temperatures and cooling may cause instrument failure or breakage.    

Read more less

Multipurpose instrument used to clamp off blood vessels, remove small root tips and grasp loose objects. Featuring halsted straight beaks.

Read more less

Mayo Straight/Blunt Suture scissors used for trimming tissue or cutting sutures. Standard Series Scissors offer a wide array of cutting blades to fit a variety of needs.    

Read more less

Used to carve anatomical features and trim excess materials.

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas.

Read more less

4.2 mm Osteotome used to condense bone material under the sinus. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.    

Read more less

4.2 mm Osteotome used to carry and place bone grafting material into site of the elevated sinus floor. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.    

Read more less

4.2 mm Osteotome used to carry and place bone grafting material into site of the elevated sinus floor. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.    

Read more less

4.2 mm Osteotome used for the transport of bone. Designed to condense bone material and/or autogenous bone under the sinus. Minimizes the risk of perforation of the mucous membrane in sinus elevation procedures.    

Read more less