A double ended hand instrument on #41 handle offering two ligature directors.

Read more less

The Ortho Debanding Debonding Kit features instrumentation designed for ortho debanding/debonding applications. The Ortho Debanding Debonding Kit features instrumentation tailored specifically for Orthodontic Debanding and Debonding procedures. Features MIR5 - 5 FS CS Mirror, Single Sided, Single MH6 - Cone Socket Mirror Handle, Satin Steel 678-914 - Scaler/Picker EXS23 - 23 SE Explorer 678-220L - Angulated Bracket Remover Pliers 678-503 - Slim Line Band Remover Pliers 678-101L - Long Handle Universal Cutter w/hold 678-501 - Slim Line Weingart Pliers IMORTHSM8 - Small Thin Ortho Cassette, Blue"

Read more less

Developed by Dr. Jay Bowman, the Clear Collection™Kit features innovative instruments designed specifically for "invisible" aligner adjustment applications.

Read more less

A double ended hand instrument on #41 handle, combining a plugger and a ligature director.

Read more less

A double ended hand instrument on #41 handle, combining a tucker and a ligature director.

Read more less

A double ended hand instrument on #41 handle, combining an explorer and a ligature director; ideal for placing and removing elastic ligatures.

Read more less

The Ortho Adjustment Kit features instrumentation designed for ortho adjustment applications. The Ortho Adjustment Kit features instrumentation tailored specifically for Orthodontic Adjustment procedures.   Features 678-504 - Slim Direct Bond Bracket Holder Tweezers 678-907 - Plugger with Picker MIR5 - 5 FS CS Mirror, Single Sided, Single MH6 - Cone Socket Mirror Handle, Satin Steel 678-330 - Mathieu Pliers-Ortho 678-325 - Bird Beak w/ Cutter 678-501 - Slim Line Weingart Pliers 678-101L - Long Handle Universal Cutter w/hold 678-500 - Slim Line Micro Cutter IMORTHLG8 - Large Thin Ortho Cassette Blue

Read more less

A double ended hand instrument on #6 handle, combining a scaler and a band pusher.

Read more less

A double ended hand instrument on #6 handle, combining a SH6 scaler and a SH7 scaler.  

Read more less

A double ended hand instrument on #6 handle, combining a ligature director and a band pusher

Read more less

A double ended hand instrument on #6 handle, combining a large plugger and a picker.

Read more less

The Clockwise Wedge is used to produce a wedge-shaped indent in an aligner at the facial and at the opposite line angle lingual for a specific tooth to create a rotational couple. Used to create a clockwise rotation. The Counter Clockwise and The Clockwise Wedge instruments are used to produce indents into the facial and the lingual plastic for the rotational movement of a specific tooth. After determining the type of rotation desired, either The Counter Clockwise or The Clockwise Wedge instrument is selected for the tooth you wish to move. The direction of rotation is determined by an occlusal view of the tooth  The appropriate Wedge indent into the aligner is created with a gentle squeeze of the instrument on the labial, near the line angle of the tooth, adjacent to the facial embrasure.  Then the same instrument is positioned on the lingual surface at the opposite line angle to create the rotational couple. By positioning the “plunger” portion of the Counter Clockwise or Clockwise Wedge instrument inside the aligner, an “outie” reservoir is created.  This can be filled with composite and cured to create a wedge attachment on the tooth to enhance tooth movement in a subsequent series of aligners. 

Read more less

A double ended hand instrument on #41 handle, combining a band pusher and a scaler; band pusher shorter than BP300. Versatile instrument for band placement and clean up of band cement. Similar to BPS1 except the band pusher is shorter on BPS2.

Read more less

A single ended band pusher on a #502 handle. Aids in placement and burnishing of band.

Read more less

A single ended band pusher on a #506 handle. Aids in placement and burnishing of band. Similar to BP300 except the band pusher is shorter on BP300S.

Read more less

A double ended hand instrument on #6 handle, combining a dull scaler and a band pusher.  

Read more less

A double ended hand instrument on #41 handle, combining a band pusher and a scaler.

Read more less

The Bootstrap Punch creates a cut-out along the gumline of clear aligners, providing a window for perfect placement of bonded buttons. Bootstrap mechanics with orthodontic elastics stretched over the aligner (from lingual to labial button) assist with directing lagging teeth to seat in the aligner trays. In addition, the Bootstrap Punch may be used to nip away plastic to provide relief from impingement of tissue.

Read more less

The Bite Plane creates an outdent along the lingual side of the maxillary anterior of clear aligners. Providing a “bite turbo-like” effect with intrusive force on anterior teeth to help correct anterior deep bites and assist with closing posterior open bites. By positioning the “plunger” portion of the Mesial or Distal Wedge instrument inside the aligner, an “outie” reservoir is created.  This can be filled with composite and cured to create a wedge attachment on the tooth to enhance tooth movement in a subsequent series of aligners.   

Read more less

.018" Ligature Director, specially designed for lingual application.

Read more less

Designed for proper wire placement and improved torque expression in an .018" slot lingual system.

Read more less

Specially designed polyester pressure-sensitive labels for permanent cassette identification, includes 50 per package. Use with IMS I.D. Marker IMS-1235.

Read more less

Replacement rail set for Infinity Series Large Ultrasonic/Handpiece Cassette. Contains compression rail and finger mat.

Read more less

Replacement rail set for Infinity Series Oral Surgery Cassette with double compression rail. Contains compression, base, and elevator rails.

Read more less

Replacement rail set for Infinity Series Signa Stat 12 instrument Cassette with double compression rail. Contains compression and base rails.

Read more less

Replacement rail set for Infinity Series Small Ultrasonic/Handpiece Cassette. Contains compression rail and finger mat.

Read more less

Resin Barcode Clip for Signature Series and Infinity Series Cassettes used for identification and tracking purposes. Dimensions: .75" x 2.26" x .067" (19mm x 57.4mm x 1.7mm). Contains lasermarked barcode to be used for identification and tracking purposes. Compatible with standard barcode reader. Follows HIBC barcode standards. Lasermark tested to last more than 800 sterilization cycles.

Read more less

Rubber Dam Clamp Organizing Board holds up to 8 clamps during sterilization and fits into cassette accessory area.

Read more less

Signature Series™ Grips are used for identifying and organizing instruments. Color: Assorted.

Read more less

Used to monitor the effectiveness of the instrument cleaning process in washer-disinfectors. Proper cleaning is the first step to effective instrument reprocessing; if debris is not removed, the instrument surface cannot be effectively sterilized. The Hu-Friedy Washer/Disinfector Cleaning Monitors are used for monitoring the efficiency of the cleaning process in washer/disinfectors. The monitor strips contain a test soil that mimics the presence of blood and tissue that may be found on an instrument after use. During the test the monitor strip is assessing multiple variables of the cleaning process including time, temperature, water impingement, detergent concentration and spray arm function. Full removal the test soil from the strip indicates an effective cleaning process. The test strips should be used in conjunction with the holder (IMS-1200H) on a daily or per load basis. How it works: Insert single use Cleaning Monitor strip into the holder Place holder with strip face up in equipment: - For Ultrasonic Cleaners:  on top of instruments fully covered in solution - For Washer Disinfectors:  in a basket on a shelf of the washer Run cleaning cycle Review results of Cleaning Monitor to determine if adjustments to process are needed Features Cost effective in order to promote routine use and monitoring of the cleaning process. The test soil on the test strips is a non-toxic, synthetic soil that mimics the blood and tissue typically found on instruments after use. No actual blood components are contained in the test soil. Test/strip holder keeps the cleaning monitor in place in order to provide an accurate result. For the Washer-disinfector cleaning monitor, the holder mimics a hinged instrument to measure the water impingement and removal of soil. Monitor strips are easy to use and easy to interpret. Cost effective in order to promote routine use and monitoring of the cleaning process.

Read more less

Silicone tabs that fit on cassette lid for identifying cassette procedure by color. Contains 5 Red tabs.

Read more less

Single use filter paper is placed in the lid and body of Hu-Friedy Sterilization Containers to allow steam penetration during sterilization and to maintain sterility post sterilization. For use when using a Hu-Friedy Sterilization Container to sterilize instruments and cassettes. To be placed in the lid and bottom of the container for each use. Single Use Only.

Read more less

Single use tamper evident seals are used to lock the latches of the Hu-Friedy sterilization container during and after sterilization in order to identify a sterility breach. For use when using a Hu-Friedy Sterilization Container to sterilize instruments and cassettes. Seals should be placed in each latch prior to sterilization. Latches are then broken upon opening the Container for use. Single Use Only.

Read more less

After Five, longer terminal shank, standard diameter. Double-ended handle. Designed to adapt to a specific area or tooth surface. Terminal shank is 3 mm longer than Standard Gracey. Longer terminal shank allows better access to deep pockets and areas with recession. blade is 10% thinner than standard Gracey curette to allow for less tissue distension when accessing deeper pockets.   Features Terminal shank elongated by 3 mm for access into deep periodontal pockets and root surfaces of 5 mm or more and better clearance around the crown. Blade thinned by 10% to ease gingival insertion and reduce tissue distention. Area-specific design patterned after the standard Gracey's offers exact adaptation and control. Available in Rigid and Extra Rigid designs for greater strength when needed.

Read more less

Replacement water filter for use with Symmetry IQ™ 3000 and 4000 units. If you need support regarding your Symmetry power cord, please call Hu-Friedy's Tech Services at 888-TEC-TECH or 888-832-8324 to speak with a specialist.

Read more less

Replacement irrigation connector for use with the Symmetry IQ™ 3000 and 4000 units. If you need support regarding your Symmetry power cord, please call Hu-Friedy's Tech Services at 888-TEC-TECH or 888-832-8324 to speak with a specialist.

Read more less

Replacement irrigation opening plug for Symmetry IQ™ 4000 Generator. If you need support regarding your Symmetry power cord, please call Hu-Friedy's Tech Services at 888-TEC-TECH or 888-832-8324 to speak with a specialist.

Read more less

Replacement irrigation bottle O-rings for Symmetry IQ™ 4000 Generator. If you need support regarding your Symmetry power cord, please call Hu-Friedy's Tech Services at 888-TEC-TECH or 888-832-8324 to speak with a specialist.

Read more less

Replacement irrigation pump cover for Symmetry IQ™ 4000 Generator. If you need support regarding your Symmetry power cord, please call Hu-Friedy's Tech Services at 888-TEC-TECH or 888-832-8324 to speak with a specialist.

Read more less

Replacement power cord for use with the Symmetry IQ™ 3000 unit (US). If you need support regarding your Symmetry power cord, please call Hu-Friedy's Tech Services at 888-TEC-TECH or 888-832-8324 to speak with a specialist.

Read more less

Carrying case of Symmetry IQ™ 3000 and accessories.

Read more less

Replacement fuse for Symmetry IQ™ 4000 Generator. If you need support regarding your Symmetry power cord, please call Hu-Friedy's Tech Services at 888-TEC-TECH or 888-832-8324 to speak with a specialist.

Read more less

Replacement power cord for use with the Symmetry IQ™ 4000 unit (US). If you need support regarding your Symmetry power cord, please call Hu-Friedy's Tech Services at 888-TEC-TECH or 888-832-8324 to speak with a specialist.

Read more less

Replacement foot control for use with the Symmetry IQ™ 3000 and 4000 units.

Read more less

E-Series diamond coated tip Thin, contra-angle diamond-coated finishing instrument used for removal of residual debris and designed to enhance access to deep periodontal pockets and furcations. Features Our special blend of stainless steel works in harmony with your generator's ultrasonic energy to optimize vibration for superior scaling efficiency and unmatched durability. S-Series tips are compatible with our Symmetry IQ 3000, 4000, NSK, and Satelec generators. E-Series tips are compatible with all EMS generators.* Symmetry Piezo Tips come with the Guardian Wrench Tip Carrier—an innovative, patented torque-limiting wrench/tip carrier designed for remarkably safe and easy connection to the handpiece. *Satelec, NSK, and EMS are trademarks of Acteon, Inc., Nakanishi Inc., and Electro Medical Systems respectively.

Read more less

Irrigation bottle (350 ml) and cap for use with Symmetry IQ™ 4000.

Read more less

Irrigation bottle (500 ml) and cap for use with Symmetry IQ™ 4000.

Read more less

Replacement spanner wrenches to assist in the replacement of the water filter in the Symmetry IQ™ 3000 and 4000 units.

Read more less