Single use Surgical Grade Stainless Steel Blade used for cutting gingival tissue and making surgical incisions that are sold sterile in a box of 100 blades. No. 4 Lab Handle required (10-100-04). Single use stainless steel blade used for cutting gingival tissue and making surgical incisions - sold sterile in a box of 100 blades. Blades are Individually wrapped and sold in convenient dispenser.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction, 10.7mm wide tip. Used to loosen the tooth from the periodontal ligament and ease extraction, 10.7mm wide tip. Made with surgical grade stainless steel.

Read more less

Presidential™ Upper Roots, Incisors, Premolars Forceps used for extracting teeth from the alveolar bone. Lifetime warranty against defects in material and workmanship Surgical grade stainless steel promotes longevity and corrosion resistance Offset (Bayonet) long, narrow beaks designed to adapt to upper roots, incisors and premolars

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Lower Primary Molars European Pediatric Forceps used for extracting teeth from the alveolar bone.

Read more less

Kelly Straight Standard Series scissors with 1 serrated blade used for trimming tissue or cutting sutures. Standard Series Scissors offer a wide array of cutting blades to fit a variety of needs.

Read more less

The 2W Wahl straight-cut bone file used for final smoothing and shaping of bone with 8.1mm wide working ends. The 2W Wahl straight-cut bone file is used for final smoothing and shaping of bone. Straight cut bone files reduces and smooths bone with only a pull stroke due to the parallel position of the cutting edges. The smaller working end is 4.8mm wide, and the larger end is 8.1mm, both at a 45 degree angle. Made from surgical grade stainless steel.

Read more less

The 2W Wakefield Bone Chisel is used for splitting teeth with a 3mm bi-bevel tip. The 2W Wakefield Bone Chisel is used for splitting teeth with a 3mm bi-bevel tip. Made with surgical grade stainless steel.

Read more less

The 2X Miller-Colburn cross-cut bone file is used for final smoothing and shaping of bone with 6.2mm wide working ends. The 2X Miller-Colburn bone file is used for final smoothing and shaping of bone. Cross-Cut files increase efficiency by cutting in two directions. One working end is curved and the other is straight. Working ends are 6.2mm wide and 22mm long. Made from surgical grade stainless steel.

Read more less

Surgical aspirator used for precision suction in the oral cavity to remove blood, saliva, and fragments of tissue and bone. The Cogswell surgical aspirator is used for precision suction in the oral cavity to remove blood, saliva, and fragments of tissue and bone. Is is designed as a one-piece suction tube with a finger hole. The hole is located at the concave area midway along the tube. The intensity of the suction is increased when finger covers the hole. Aspirator is 9.6" long and has a 2.3mm diameter opening. Made of surgical grade stainless steel.

Read more less

Multipurpose instrument used to clamp off blood vessels, remove small root tips and grasp loose objects. Featuring halsted curved beaks.

Read more less

Mayo Curved/Blunt Suture scissors used for trimming tissue or cutting sutures. Standard Series Scissors offer a wide array of cutting blades to fit a variety of needs.

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas.

Read more less

The 3 Fedi Chisel is used for incisions that remove or recontour soft tissue and to excise interproximal tissue with 2.8mm working end at 40 degree angle. The 3 Fedi Chisel is used for incisions that remove or recontour soft tissue, and is also useful to excise interproximal tissue. Fedi chisels are also designed to make secondary sulcular incisions in flap procedures and facilitate removal of remaining fibers on tooth. Chisel is 2.8mm wide and has a 40 degree angle. Made from surgical grade stainless steel for longevity and corrosion resistance.

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas. The Heidbrink root tip picks are designed for delicate root teasing procedures. They are also available in a "heavy" pattern for more substantial root tip removal procedures.

Read more less

Used to hold mucoperiosteal flaps, cheeks, lips and tongue away from the surgical area. Featuring a round blade retractor. 12.0mm

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas.

Read more less

The 3 Kramer-Nevins Chisel is a long, mono-beveled chisel used to widen and split bone with 7.5mm working end. The 3 Kramer-Nevins Chisel is a long, mono-beveled chisel used to widen and split bone with 7.5mm working end. Made with surgical grade stainless steel.

Read more less

Larger and heavier curettes for the removal of granulation tissue and tenacious subgingival deposits. Larger and heavier curettes for the removal of granulation tissue and tenacious subgingival deposits.

Read more less

Periosteal Elevators are designed for reflecting and retracting the mucoperiosteum after incisions of the gingival tissue. Hu-Friedy periosteal elevators are manufactured from stainless steel to exacting specifications to ensure optimal performance and l

Read more less

Luxating elevators have thin, sharp blades that are used to cut periodontal ligaments. The luxating elevator is used by rocking and cutting vs. an elevator that lifts and pries. Luxating elevators reduce putting pressure on adjacent teeth.

Read more less

3 mm end-cutting rongeurs used for widening the sinus window.

Read more less

Luxating elevators have thin, sharp blades that are used to cut periodontal ligaments. The luxating elevator is used by rocking and cutting vs. an elevator that lifts and pries. Luxating elevators reduce putting pressure on adjacent teeth.

Read more less

The 3 Orringer Cheek Retractor is a hands-free retractor used to hold mucoperiosteal flaps, cheeks, lips and tongue away from the surgical area, 4.4" long. The 3 Orringer Cheek Retractor is a hands-free retractor used to hold mucoperiosteal flaps, cheeks, lips and tongue away from the surgical area, 4.4" long. Made with surgical grade stainless steel.

Read more less

3.7 mm Osteotome used for preparing bone.7-10-13-15-18mm Used to separate and lift the cortical bone (green stick fracture) or spread the bone laterally when inserted into the pilot hole.

Read more less

Periosteal Elevators are designed for reflecting and retracting the mucoperiosteum after incisions of the gingival tissue. Featuring two blades, one large flat blade and one narrow sharp blade on round tip. 4.7mm/11.0mm

Read more less

For severing the periodontal ligament.1.5mm All periosteals come with the handle shown unless additional options are listed.

Read more less

Used during a sinus lift procedure to separate/reflect the Schneiderian membrane from the maxillary bone and to elevate the membrane. 3.9mm

Read more less

The 3 Bard Parker style scalpel handle with metric ruler is used for cutting gingival tissue and making surgical incisions. The 3 Bard Parker style scalpel handle with metric ruler is used for cutting gingival tissue and making surgical incisions. Handle is 4.9" long and 13mm wide at base. Compatible with standard scalpel blade sizes.

Read more less

Used to hold mucoperiosteal flaps, cheeks, lips and tongue away from the surgical area. 12.0 x 55.0mm

Read more less

Used during a sinus lift procedure to separate/reflect the Schneiderian membrane from the maxillary bone and to elevate the membrane. 1.5mm

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas.

Read more less

For reflecting and retracting the mucoperiosteum. All periosteals come with the handle shown unless additional options are listed.

Read more less

3.2 mm Osteotome used to condense bone material under the sinus. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.

Read more less

3.2 mm Osteotome used to carry and place bone grafting material into site of the elevated sinus floor. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.

Read more less

3.2 mm Osteotome used to carry and place bone grafting material into site of the elevated sinus floor. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.

Read more less

3.2 mm Osteotome used for the transport of bone. Designed to condense bone material and/or autogenous bone under the sinus. Minimizes the risk of perforation of the mucous membrane in sinus elevation procedures.

Read more less

3.2 mm Osteotome used for lateral bone condensation for elevation of the sinus floor. The angle assists with posterior access. Specially designed for closed sinus elevation operations in the lateral upper jaw region or in difficult-to-access maxillary areas.

Read more less

3.2 mm Osteotome used for lateral bone condensation forelevation of the sinus floor.

Read more less

3.7 mm Osteotome used to condense bone material under the sinus. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.

Read more less

3.7 mm Osteotome used to carry and place bone grafting material into site of the elevated sinus floor. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.

Read more less

3.7 mm Osteotome used to carry and place bone grafting material into site of the elevated sinus floor. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.

Read more less

3.7 mm Osteotome used for the transport of bone. Designed to condense bone material and/or autogenous bone under the sinus. Minimizes the risk of perforation of the mucous membrane in sinus elevation procedures.    

Read more less

3.7 mm Osteotome used for lateral bone condensation for elevation of the sinus floor. The angle assists with posterior access. Specially designed for closed sinus elevation operations in the lateral upper jaw region or in difficult-to-access maxillary areas.    

Read more less

Periosteal Elevators are designed for reflecting and retracting the mucoperiosteum after incisions of the gingival tissue. Featuring two blades, one large flat blade and one with suture hole in narrow blade #6 handle 7.8mm/11.0mm      

Read more less

Blumenthal 30 degree rongeur for cutting bone or tissue. _3.3mm _14.5cm

Read more less

Presidential™ Upper Roots Serrated Forceps used for extracting teeth from the alveolar bone. Features Lifetime warranty against defects in material and workmanship Surgical grade stainless steel promotes longevity and corrosion resistance Long, slender slightly curved conical beaks designed to adapt to upper roots Longitudinal serrations gently enhance the grasp on the roots

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.    

Read more less