Lingual Ligature Director with Picker for wires up to .021" x .025" (.53mm x .64mm) Features Optimal intraoral access Ideal visibility for clinician Enhanced comfort for patient More time savings allowing for additional patient education

Read more less

Creates a notch at the gingival margin of clear aligners anywhere elastic hooks are required. Creates a notch at the gingival margin of clear aligners anywhere elastic hooks are required, providing a reservoir to hold the elastics in place as the aligner is seated, permitting easier manipulation of elastics by the patient. Please visit our Clear Collection™ Page to learn more about our products.

Read more less

The Petite Punch cuts a 4.5mm half-moon cutout for relief of clear aligners around bonded buttons used for elastics and nips away plastic to provide soft tissue clearance to prevent aligner impingement of tissue. The Petite Punch cuts a 4.5mm half-moon cutout in an aligner for relief of the plastic around bonded buttons used for elastics. When only a small cut-out is required to provide clearance for buttons or hooks on the buccal but also on the lingual of any tooth in the aligner, especially for smaller teeth. The Petite Punch can also be used to “nip away” plastic at the edge of aligners to provide relief from soft tissue impingement or irritation.

Read more less

Places V Bend on archwires up to .022" x .025" (.56 mm x .64 mm). Places V Bend in archwires, including nickel titanium, to prevent archwire from traveling.

Read more less

Provides optimum accuracy and precision in forming and closing loops with one cylindrical three-step beak and one triangular beak, on wires up to .022" x .025" (.56 mm x .64 mm).

Read more less

Slimmer, serrated tips makes this ideal for gripping and placing elastic auxiliaries.

Read more less

Mathieu Pliers with Perma Sharp inserts. These are ideal when you want the flexibility of using for elastic and stainless steel ligatures. The Perma Sharp insert can be replaced up to two times, extending the life of the instrument.

Read more less

Versatile utility pliers with serrations that is useful for placement and removal of archwires. As an extension of your hands, the serrated tips allow for better gripping and accessibility into tight spaces that are typically not possible with hands. These pliers help guide the archwire through buccal tubes and into brackets with ease with a 20% reduced working end as compared to our 678-201 model and 45% reduced working end as compared to 678-202.

Read more less

Bends a variety of smooth loops on stainless steel wires up to .022" x .025" (.56 mm x .64 mm).

Read more less

Multi-use pliers for bending NiTi up to .025" (.64 mm). For NiTi wire only. Reduce a multi-process step process down to one step with these wire-forming pliers. Simply squeeze and you are done; NO heat required. For NiTi wire only. 678-502 is a 10% slimmer version of the 678-327.

Read more less

Designed to cut soft wire pins and ligature wires up to .012" (.30 mm). Micro cutter with 15? offset tip with ultra slim profile is a plus in the most difficult to access areas. Similar to 678-110 with 13% smaller working end.

Read more less

Multi-use pliers for bending NiTi up to .025" (.64 mm). For NiTi wire only. Reduce a multi-process step process down to one step with these wire-forming pliers. Simply squeeze and you are done; NO heat required. With a 10% slimmer working end than our 678-327 model, these less intrusive pliers are designed for ultimate patient comfort. For NiTi wire only.

Read more less

Smooth bending surfaces for a range of loop sizes while providing a sharp blade for cutting, accommodates stainless steel wires up to .025" (.64 mm).

Read more less

Torquing Pliers for stainless steel wires, with .019"/.022" Key. Replacement key available. Learn more: 678-020

Read more less

Double-sided offset beak permits bayonet bends on wires up to .022" x .025" (.56 mm x .64 mm). Pliers create a right-hand or left-hand step-up or step-down at 1/2mm.   Features Crafted with Immunity Steel™, the highest quality Surgical Grade Stainless Steel, containing an optimal blend of carbon and chromium. These elements, combined with our exclusive processing, assure the creation of an outstanding instrument that will be resistant to corrosion given proper use and care.

Read more less

Double-sided offset beak permits bayonet bends on wires up to .022" x .025" (.56 mm x .64 mm). Pliers create a right-hand or left-hand step-up or step-down at 3/4mm.   Features Crafted with Immunity Steel™, the highest quality Surgical Grade Stainless Steel, containing an optimal blend of carbon and chromium. These elements, combined with our exclusive processing, assure the creation of an outstanding instrument that will be resistant to corrosion given proper use and care.

Read more less

Excellent for forming helical closing loops and arch adjustments on stainless steel wires up to .022" x .025" (.56 mm x .64 mm).

Read more less

Double-sided offset beak permits bayonet bends on wires up to .022" x .025" (.56 mm x .64 mm). Pliers create a right-hand or left-hand step-up or step-down at 1mm.   Features Crafted with Immunity Steel, the highest quality Surgical Grade Stainless Steel, containing an optimal blend of carbon and chromium. These elements, combined with our exclusive processing, assure the creation of an outstanding instrument that will be resistant to corrosion given proper use and care.

Read more less

Slim band removing pliers with tapered beak providing improved visibility and access. These pliers come with the 3/16" pad already loaded in the working end, and with an extra 1/4" to try. Replacement pads can be re-ordered as needed. Check out the products: 678-014 and 678-036

Read more less

Designed for the forming and contouring of NiTi archwire up to .020" (.51 mm). For NiTi wire only.

Read more less

Torquing Pliers for stainless steel wires, with .016"/.018" Key. Replacement key available. Learn more: 678-020

Read more less

Serrated tips makes this ideal for gripping and placing elastic auxiliaries. Similar to 678-330 but with wider tips.

Read more less

Direct Bond Bracket Tweezers. 50% slimmer at tip as compared to 678-212. Direct bond bracket tweezers offer the practitioner a confident and more visible grasp when bringing the bracket to the patient's mouth, while the thinner back end of the instrument allows for an easy manipulation of the bracket's position by a simple flip of the instrument. Allowing for one versus two instruments to be used in bracket placement and manipulation.

Read more less

Designed for placing first, second and third order bends on stainless steel wires up to .022" x .025" (.56 mm x .64 mm). .050" (1.28 mm) blade width

Read more less

Designed for placing first, second and third order bends on stainless steel wires up to .022" x .025" (.56 mm x .64 mm). .070" (1.78 mm) blade width

Read more less

Thin tips allow for easy access into molar and premolar bands. Same as 678-225 with spring.

Read more less

Loop forming pliers with .055", .075", and .090" (1.4mm, 1.9mm, and 2.3mm) diameters for creating bull and helical loops on wires up to .022" x .025" (.56 mm x .64 mm).

Read more less

Tips are rounded for ease of contouring and bending light wire stainless steel wires up to .030" (.76 mm).

Read more less

Versatile light wire bending pliers with serrations accommodating stainless steel wire up to .020" (.51mm). Grooves assist with precise bending and closing of loops.

Read more less

Useful for contouring and bending stainless steel wires up to .030" (.76 mm).

Read more less

Graduated cones .045", .060", and .075" (1.14 mm, 1.52 mm, and 1.91 mm) are designed to form precise omega loops on wires up to .022" x .025" (.56 mm x .64 mm). These pliers come with a hex key. Replacement blade and/or screw can be re-ordered as needed. Check out the products: 678-018 and 678-002

Read more less

A longer cone than a standard bird beak is useful for forming precise loops in light wires up to .020" (.51 mm). The groove allows for locating and duplicating loops.

Read more less

For precise forming of small helical loops and intraoral tip back bends on stainless steel wires up to .020" (.51 mm).

Read more less

Ideal for general contouring of stainless steel archwire up to .021" x .025" (.53 mm x .64 mm).

Read more less

Versatile loop forming pliers for round wires up to .030" (.76 mm).

Read more less

Designed to create double back and triple back bends in lingual arch wires, up to .036" (.91 mm).

Read more less

For precise forming of helical loops and T loops on wires up to .022" x .025" (.56 mm x .64 mm). No right angles. Prevents stress fracture of wires.

Read more less

Perfect for subtle contouring of stainless steel arch wires up to .030" (.76 mm). Similar to the 678-310 but with a reduced radius.

Read more less

For precise forming of loops on stainless steel wire up to .022" (.56 mm). For precise forming of loops in four lengths: 3, 4, 5 and 6mm, with a groove at the base to aid in closing loops.

Read more less

For precise right angle bends and appliance adaptation on stainless steel wires up to .040" (1.02 mm).

Read more less

Designed for placing first, second and third order bends on stainless steel wires up to .022" x .025" (.56 mm x .64 mm).

Read more less

Designed for placing first, second and third order bends on stainless steel wires up to .022" x .025" (.56 mm x .64 mm).

Read more less

A longer cone than a standard bird beak is useful for forming precise loops in light wires up to .020" (.51 mm).

Read more less

Versatile utility pliers with serrations, accommodating wires up to .030" (.76mm).

Read more less

Reversible, replaceable blade is used to remove the bulk of composite material after debonding attachments. These pliers come with a 1/4" already loaded in the working end, one extra 1/4" replacement pad, 1 extra blade and 1 hex key come in the package. Replacement pads can be re-ordered as needed.

Read more less

The alignment of the tip and occlusal pad is well suited for posterior band removal. These pliers come with the 3/16" pad already loaded in the working end, and with an extra 1/4" to try. Replacement pads can be re-ordered as needed.

Read more less

Designed to bend down the distal extension of an stainless steel archwire protruding past the buccal tube, accommodating stainless steel archwire up to .022" x .025" (.56mm x .64mm) A unique contra-angle design allows for easy access and bending the wire intraorally. Available in long handle design for easy reach to the posterior buccal tube.

Read more less

High angle design in long handle is effective for removal of all bracket styles for both the anterior and posterior.

Read more less