Dental Supplies Catalog

1/2 Rigid Barnhart Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 1/2 Rigid Barnhart Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

Versatile utility pliers with serrations, accommodating wires up to .030" (.76mm). Useful for placement and removal of archwires, pins and other auxiliaries.

Read more less

1/2 Rigid After Five™ Gracey Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 1/2 Rigid After Five™ Gracey Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

The Columbia Cheek Retractor is used to hold mucoperiosteal flaps, cheeks, lips and tongue away from the surgical area, 5.4" long. The Columbia Cheek Retractor is used to hold mucoperiosteal flaps, cheeks, lips and tongue away from the surgical area, 5.4" long. Made with surgical grade stainless steel.

Read more less

The Bolet Gauge helps in determining tooth dimensions of length, width, and thickness in millimeter increments. It is used for measuring teeth and spaces. The flat end is good for measuring teeth size and distance of spaces in the mouth.    

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas. The Heidbrink root tip picks are designed for delicate root teasing procedures. They are also available in a "heavy" pattern for more substantial root tip removal procedures.

Read more less

For mixing materials and general laboratory use. 12.5mm/10.7mm  

Read more less

#129 Posterior Sickle Scaler designed for the removal of heavy deposits. #6 Handle

Read more less

0/00 Morse DE Scaler with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to Harmony™ Ergonomic Scalers are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 0/00 Morse DE Scaler is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

Buccal Lingual 0.9 mm curette blade. Designed for scaling root concavities and furcations.    

Read more less

Designed for scaling root concavities and furcations. The DeMarco Curettes are excellent for stain removal on anterior lingual surfaces.    

Read more less

Mesial Distal 0.9 mm curette blade. Designed for scaling root concavities and furcations.    

Read more less

A super thin, anterior curved sickle. Double-ended, easy-grip handle. 1 Nevi™ Anterior Scaler with Harmony™ Ergonomic Scaler handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up Harmony™ Ergonomic Scalers are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 1 Nevi™ Anterior Scaler is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.    

Read more less

A thin curved blade. Double-ended, easy-grip handle. 1 Nevi™/H5 Anterior Scaler with Harmony™ Ergonomic Scaler handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth Harmony™ Ergonomic Scalers are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 1 Nevi™/H5 Anterior Scaler is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.

Read more less

Anterior sickle scaler. Double-ended, easy-grip handle. Anterior sickle scaler designed for the removal of supragingival calculus.

Read more less

Curved sickle scaler. Single-ended, easy-grip handle. Designed for the removal of supragingival calculus.    

Read more less

1/2 After Five™ Gracey Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the armony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 1/2 After Five™ Gracey Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.    

Read more less

Barnhart Universal Curette blade design. Double-ended, easy-grip handle. 1/2 Barnhart Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 1/2 Barnhart Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.    

Read more less

Barnhart Universal Curette blade design. Double-ended, easy-grip handle. Barnhart Universal Curette blade designed with two cutting edges and a rounded toe for use on all surfaces. EverEdge™ 2.0 scalers are the sharpest and longest-lasting scalers on the market. Using a superior heat treatment process, enhanced finishing process and an optimized steel, EverEdge™2.0's edges are scientifically measured to be over 72% sharper than the next closest competitor.    

Read more less

1/2 Barnhart Curette, USC/Suter, with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 1/2 Barnhart Curette, USC/Suter, is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.    

Read more less

Curette-Chisel combination blade design. Double-ended handle. Curette-Chisel combination blade designed with two cutting edges and a rounded toe for use on all surfaces.    

Read more less

1/2 Gracey Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37 Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 1/2 Gracey Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.    

Read more less

Anterior Hutchinson Curette blade design. Double-ended handle. Anterior Hutchinson Curette blade designed with two cutting edges and a rounded toe for use on all surfaces. Available in EverEdge™ Technology, a revolutionary stainless steel alloy that is super-durable to stay sharper longer.    

Read more less

1/2 Langer Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37 Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 1/2 Langer Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.    

Read more less

Reduced blade, half length of the standard langer. Thinner blade. Double-ended, easy-grip handle. The Langer Curette design combines the benefits of a Universal Curette blade, and the shank designs of area specific Curettes. Features A Universal blade allows Instrumentation on both the Mesial and Distal surfaces with one Instrument. The Gracey Style shanks allow adaptation on difficuly Posterior Root surfaces. Available in Handle options including EverEdge™ technology. SuiTable for scaling and Root planing and Periodontal Surgery. Rigid Langer Curettes have a thicker shank diaMeter that provides greater rigidity for Heavy calculus removal. After Five™ Langer Curettes feature a Thinned blade that allows for easier insertion into deep, tight Periodontal pockets by the 3 mm extension of the terminal shank. Langer Mini Five™ Curettes feature a 50% Shorter blade for improved access and adaptation on narrow Root surfaces, Furcation areas, and narrow pockets by the 3 mm extension of the terminal shank.    

Read more less

1/2 Micro Mini Five™ Gracey Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 1/2 Micro Mini Five™ Gracey Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.    

Read more less

1/2 Mini Five™ Gracey Curette with Harmony™ Ergonomic Curette handle, designed with TrueFit™ Technology, is your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the Harmony™ Ergonomic Curettes are your truly ergonomic hand scaling solution scientifically proven to reduce pinch force up to 65% and the amount of pressure applied to the tooth up to 37%. The handle of the 1/2 Mini Five™ Gracey Curette is designed with TrueFit™ Technology, an advanced sensor-based technology system capable of measuring touch sensitivity and pressure at 40 readings per second, collected more than 2.8 million data points to develop this truly ergonomic hand scaling solution.    

Read more less

Buccal Lingual. Cutting edge blades, extended shank. These unique curettes are used after ultrasonic scaling for gentle removal of residual deposits and for smoothing the root surface. Ideal for furcations, developmental grooves and line angles. Entire edge of the blade is a cutting edge enabling a push or pull stroke in all directions- vertical, horizontal or oblique. Shanks are extended for easy access into deep pockets.    

Read more less

Shorter, thinner, smaller blade honed at a 60 degree angle. Modified rigid shank. Double-ended handle. Following initial scaling and root planing or surgery, the gingiva tightens as it heals and there may be areas of recession and/or residual pocket depth. These areas require a smaller and thinner curette blade to insert subgingivally on most periodontal maintenance patients. In collaboration with Hu-Friedy, Anna Pattison designed the new Periodontal Maintenance Gracey curettes with these challenges in mind. Features Thinner, smaller blades Modified Rigid Shank Easier Access and insertion under tight tissue EverEdge™ blade    

Read more less

Rigid After Five, longer terminal shank, increased diameter. Double-ended handle. Designed to adapt to a specific area or tooth surface. Terminal shank is 3 mm longer than Standard Gracey. Longer terminal shank allows better access to deep pockets and areas with recession. blade is 10% thinner than standard Gracey curette to allow for less tissue distension when accessing deeper pockets. EverEdge™ 2.0 scalers are the sharpest and longest-lasting scalers on the market. Using a superior heat treatment process, enhanced finishing process and an optimized steel, EverEdge™2.0's edges are scientifically measured to be over 72% sharper than the next closest competitor. Features Terminal shank elongated by 3 mm for access into deep periodontal pockets and root surfaces of 5 mm or more and better clearance around the crown. Blade thinned by 10% to ease gingival insertion and reduce tissue distention. Area-specific design patterned after the standard Gracey's offers exact adaptation and control. Available in Rigid and Extra Rigid designs for greater strength when needed.

Read more less

White outlet accommodates both Accutron™ and Porter™ quick connect hoses. Surface outlets can be installed after the fact when walls are already in place.    

Read more less

White outlet accommodates both Accutron™ and Porter™ quick connect hoses. Surface outlets can be installed after the fact when walls are already in place.    

Read more less

.040" Splint Material, 5" x 5" 50/Bx. Stiff clear material is ideal for hard splints, thin splints, surgical trays, orthodontic retainers and bleaching trays. Sticks to acrylics for various dental appliances.

Read more less

Denture Cups - New Age Assorted Colors, 12/Box. 1-3/4" deep Denture Storage Cases combine bright, trendy colors with practical spill-resistant cleaning and storage. Soft plastic construction. 12 unscented storage cases per box in assorted Aqua, Lavender, Lime, Orange, Pink and Purple. ID labels included.

Read more less

ProForm Dual Laminate (E-Gasket), 5" x 5" .120 (3mm) thick, Clear 12/Box. A unique hard/soft two layer laminate used for functional splints in TMJ cases and for hard bruxing patients.

Read more less

Flowable Composite - A2 2gm Syringe, 4/Pk. Light Cure.

Read more less

1 Trombelli Periosteal, 3mm/3mm, DE, #6 The  Trombelli Periosteal Elevator (Air Series) is a double-ended stainless steel instrument engineered for precision in periodontal and oral surgery. It features sharp and thin working ends designed specifically for the atraumatic elevation and reflection of the mucoperiosteal flap, minimizing trauma to the tissue and maximizing bone exposure. Product Details:Trombelli Periosteal, Fig. 1Double-ended hand instrumentWorking end sizes are 3mm/3mmHollow handle design, 10mm diaSurgical Stainless steelCompletely Sterilizable  

Read more less

2N Nabers Probe, 3-6-9-12, Metal, Double-Ended Nabers probe is used to determine the extent of furcation involvement on a multi rooted teeth. It has curved working end for accessing the furcation area. The end is blunt so that it will not harm soft tissues. Some of the Nabers Probe do not have markings. The depth of insertion of the probe into the furcation area determines the degree of furcation involvement. The rounded shape of the Nabers facilitates the investigation of furcation areas and the measurement of pocket depths and widths. The thin, unbreakable and yet flexible tips from a special steel alloy guarantee an extremely long life. All our Periodontal probes are prepared by a high-speed cutting machine. Working parts are in very fine to very precise dimensions and the color markings are (do not dissolve or fade off) ultrasound-resistant. Ergonomic shape and non-slip handle is very good in the hand, you can grab a relaxed and prevents fatigue.  

Read more less

🦷 Dual-Function Diagnostic Instrument The 3A/UNC15 Expro is a premium double-ended hand instrument combining the diagnostic capabilities of the 3A Explorer and the UNC15 Periodontal Probe into a single, efficient tool. 3A Explorer: Features a sharp, tactile point for precise detection of caries (decay), calculus, and for the detailed exploration of restoration margins, pocket characteristics, and furcations. The sharp point enhances the user's tactile sensation for accurate assessment. UNC15 Probe: Marked at precise 1mm intervals (full-mm markings) along its working end. This critical feature is used for the diagnosis and charting of periodontal disease severity (pocket depth measurement) and for assessing treatment outcomes. 🛠️ Premium Construction & Precision Constructed from surgical-grade stainless steel, this instrument features thin, unbreakable, yet flexible tips made from a special steel alloy to guarantee an extremely long working life. The working ends are manufactured using a high-speed cutting machine to ensure precise dimensions. The color markings on the probe are ultrasound-resistant and will not dissolve or fade during sterilization. ✅ Product Highlights Function: Double-ended combination of 3A Explorer and UNC15 Probe. Material: Surgical-grade stainless steel. Sterilization: Completely sterilizable. Key Use: Excellent tool for comprehensive dental examinations and accurate periodontal charting.

Read more less

The Scalpel Handle N.5 is a straight, surgical-grade stainless steel instrument designed to provide precise control and a comfortable grip during delicate procedures. Featuring a round handle design for superior tactile feedback and ease of rotation, it measures 14.5cm in total length. This handle is specifically engineered to securely fit and hold surgical blades marked No. 5, making it an essential, completely sterilizable tool for various surgical and dissection applications.

Read more less

Discover precision and efficiency with the SurgiMac #2 Tunnelling Knife, crafted for delicate surgical procedures. Made from high-quality stainless steel and featuring air series functionality, this knife ensures optimal control and maneuverability. Packaged as a single unit per pack, it's an essential tool for surgical settings. Specs: Tunnelling knife, ideal for delicate surgical procedures Crafted from durable stainless steel Air series functionality for precise handling Packaged as 1 unit per pack for convenience Material: The SurgiMac #2 Tunnelling Knife is constructed from premium stainless steel, guaranteeing durability and reliability. Its robust material ensures long-lasting performance, making it a trusted tool in surgical procedures. Characteristics: Precision-engineered for optimal control and maneuverability Designed for delicate surgical procedures requiring intricate incisions Air series functionality ensures smooth operation and precise handling Compact and portable for seamless integration into surgical setups Provides reliable performance, enhancing surgical outcomes Precautions: Use under the supervision of a qualified medical professional Ensure proper sterilization before and after each use to maintain hygiene standards Handle with care to prevent injury or damage to the knife Store in a clean, dry environment to prevent contamination Regularly inspect for signs of wear or damage and replace as necessary for optimal performance

Read more less

The TG-O Modified Periodontology Chisel is a specialized, double-ended (DE) instrument designed for use in surgical periodontal and implant procedures. Both working ends are straight and precisely sized at 3.2mm. This chisel is primarily used for the controlled removal and recontouring of osseous (bone) tissue. Utilizing a push stroke technique, it is an effective tool for the recovery of autogenous bone material for subsequent grafting procedures. Crafted from surgical-grade stainless steel, the TG-O Chisel is completely sterilizable and built for durability and precise application in hard tissue surgery.

Read more less

The 9/10 Schluger Periodontal File is a specialized, double-ended (DE) surgical instrument designed for controlled interproximal bone reduction in periodontal and restorative procedures, such as crown lengthening. This file features curved working ends specifically shaped to access and reduce bone height in confined spaces, particularly in areas where traditional rotary instruments (like crown lengthening burs) cannot safely fit, such as between upper molars. The design includes two cutting sides and a flat, non-cutting side that protects the adjacent tooth surface from damage during use. Crafted from surgical-grade stainless steel with a comfortable 10mm hollow handle, the file is completely sterilizable and manipulated using slow, gradual push-pull (in-and-out) motions to safely reduce interproximal bone peaks.

Read more less

The 1/2 Sugarman Periodontal File is a specialized, double-ended (DE) instrument designed for safe and controlled interproximal bone reduction, particularly during procedures like crown lengthening. This file features working ends with distinct Mesial/Distal angulations, allowing for optimal access to the bone peaks between teeth. Like the Schluger file, the Sugarman file is essential when rotary burs cannot safely reach tight interproximal spaces (e.g., in posterior molars). It operates via a gradual back-and-forth or in-and-out motion. The file is constructed with two cutting sides and a crucial flat, non-cutting side to shield the adjacent tooth structure from damage. Crafted from surgical stainless steel with a 10mm hollow handle for controlled manipulation, this instrument is completely sterilizable.

Read more less

The 3/7 Hirschfeld File Scaler is a specialized, double-ended (DE) instrument featuring Buccal/Lingual angulations designed for targeted calculus removal and root planning in periodontal therapy. Despite being listed for interproximal bone reduction, its primary use is tackling gross calculus removal in challenging areas such as: Deep, narrow periodontal pockets where standard curettes cannot reach. Lingual/Palatal surfaces of anterior and posterior teeth. Root concavities (e.g., mandibular molars). The instrument is crafted from surgical stainless steel with a 10mm hollow handle for comfortable grip and is completely sterilizable. It is used with a vertical, coronal pull stroke and is often followed up with a curette for final smoothing.

Read more less

The SurgiMac #5mm Curved Elevator (Air Series) is a high-quality, surgical-grade stainless steel instrument designed for use in various oral and maxillofacial surgical procedures. It features a 5mm wide, curved working end with a non-serrated surface. This design is specialized for elevating, reflecting, and separating soft tissues and bone fragments, particularly during extractions or flap reflection. The curved tip facilitates access to posterior or difficult-to-reach surgical sites, ensuring smooth and controlled manipulation Usage:Ideal for loosening teeth and elevating roots in curved or difficult-to-reach areas, ensuring minimal trauma to surrounding tissues. Specifications:Blade Size: 5mmBlade Type: Curved, non-serratedHandle Type: Ergonomic Air Series handleMaterial: High-grade stainless steelSterilization: AutoclavablePackaging: 1 instrument per pack

Read more less

The SurgiMac #5mm Straight Elevator (Air Series) is a high-quality, surgical-grade stainless steel instrument designed for use in various oral and maxillofacial surgical procedures. It features a 5mm wide, straight working end with a non-serrated surface. This design is specialized for elevating, reflecting, and separating soft tissues and bone fragments, particularly during extractions or flap reflection. The Straight tip facilitates access to posterior or difficult-to-reach surgical sites, ensuring smooth and controlled manipulation Usage:Ideal for loosening teeth and elevating roots in curved or difficult-to-reach areas, ensuring minimal trauma to surrounding tissues. Specifications:Blade Size: 5mmBlade Type: Straight, non-serratedHandle Type: Ergonomic Air Series handleMaterial: High-grade stainless steelSterilization: AutoclavablePackaging: 1 instrument per pack

Read more less

The SurgiMac #3mm Straight Elevator (Air Series) is a high-quality, surgical-grade stainless steel instrument designed for use in various oral and maxillofacial surgical procedures. It features a 3mm wide, straight working end with a non-serrated surface. This design is specialized for elevating, reflecting, and separating soft tissues and bone fragments, particularly during extractions or flap reflection. The Straight tip facilitates access to posterior or difficult-to-reach surgical sites, ensuring smooth and controlled manipulation Usage:Ideal for loosening teeth and elevating roots in curved or difficult-to-reach areas, ensuring minimal trauma to surrounding tissues. Specifications:Blade Size: 3mmBlade Type: Straight, non-serratedHandle Type: Ergonomic Air Series handleMaterial: High-grade stainless steelSterilization: AutoclavablePackaging: 1 instrument per pack

Read more less