Presidential™ Upper and Lower Incisors, Canines, Premolars, and Deciduous; Universal Forceps used for extracting teeth from the alveolar bone. Features Lifetime warranty against defects in material and workmanship Surgical grade stainless steel promotes longevity and corrosion resistance Universal, conical beaks designed to adapt to upper and lower incisors, canines, premolars and deciduous teeth

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

The 6 Bernard elevator is also referred to as a syndesmotome and can be used as a periotome or to elevate small roots concave surface with a concave surface that is approximately 3.6mm wide. The angled design of the BER6 is best suited for posterior teeth. Made of surgical grade stainless steel.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

6 mm Osteotome used for cutting or preparing bone.

Read more less

The 6 Gardner Bone Chisel is used to shave bone with a 4mm mono-bevel tip. The 6 Gardner Bone Chisel is used to shave bone with a 4mm mono-bevel tip. Made with surgical grade stainless steel.

Read more less

Wagner Curved Standard Series scissors with 1 serrated blade used for trimming tissue or cutting sutures. 11.5cm Standard Series Scissors offer a wide array of cutti

Read more less

The 6 Buser Chisel is used to section/split teeth and remove bone and features a 6.3mm bi-bevel tip. The Buser Chisel is used to section/split teeth and remove bone and features a 6.3mm bi-bevel tip. Made from surgical grade stainless steel.

Read more less

Side-cutting rongeurs used for trimming and recontouring alveolar bone and gross tissue removal. ____1.5mm ___15mm

Read more less

The 5 Molt Left surgical curette is designed for curettage, cyst removal and tooth socket debridement with 2.9mm working ends. The 5 Molt Left surgical curette is designed for curettage, cyst removal and tooth socket debridement with 2.9mm working ends. Curette is angled for improved access to posterior. Made with surgical grade stainless steel.

Read more less

The 55 Kramer-Nevins Chisel is is designed for contiguous bone graft procedures, compacting bony walls after bone grafting, and is useful for removal of exostosis and tori. The 55 Kramer-Nevins Chisel is is designed for contiguous bone graft procedures, compacting bony walls after bone grafting, and is useful for removal of exostosis and tori. Chisel has a 5.5mm mono-beveled tip. Made with surgical grade stainless steel.

Read more less

Atlas Forceps are uniquely designed to enhance performance and comfort by providing strength, precision and flexibility throughout the surgical procedure. Engineered to bring simplicity and precision, Atlas Forceps have the power to effectively, and predictably perform even the most difficult extractions. The innovative internal spring reduces hand manipulation, increases comfort and control, and is available in apical designs for an atraumatic extraction.   Features Internal springs maintain the forceps in the open position, reducing manipulation during surgery, enhancing comfort and control Apical designs provide a firm, secure grasp of the crown and root Thin, sharp tapered beaks for ease in penetrating the PDL and Apical progression* Internal spring hinge ensures forceps are in the open position during reprocessing Laser marked hinge for easier identification during cleaning and sterilization Meticulously hand crafted from the finest grade surgical stainless steel

Read more less

Presidential™ Forceps for 1st and Upper 2nd Molars; right. Pointed beak for engaging bifurcated buccal root. Lifetime warranty against defects in material and workmanship Surgical grade stainless steel promotes longevity and corrosion resistance Pointed, offset (Bayonet) beaks for engaging bifurcated buccal root on upper first and second molars Deep cavity in beaks prevents crown from being crushed

Read more less

Atlas Forceps are uniquely designed to enhance performance and comfort by providing strength, precision and flexibility throughout the surgical procedure. Engineered to bring simplicity and precision, Atlas Forceps have the power to effectively, and predictably perform even the most difficult extractions. The innovative internal spring reduces hand manipulation, increases comfort and control, and is available in apical designs for an atraumatic extraction.   Features Internal springs maintain the forceps in the open position, reducing manipulation during surgery, enhancing comfort and control Apical designs provide a firm, secure grasp of the crown and root Thin, sharp tapered beaks for ease in penetrating the PDL and Apical progression* Internal spring hinge ensures forceps are in the open position during reprocessing Laser marked hinge for easier identification during cleaning and sterilization Meticulously hand crafted from the finest grade surgical stainless steel

Read more less

Presidential™ Forceps for 1st and Upper 2nd Molars; left Pointed beak for engaging bifurcated buccal root. Lifetime warranty against defects in material and workmanship Surgical grade stainless steel promotes longevity and corrosion resistance Pointed, offset (Bayonet) beaks for engaging bifurcated buccal root on upper first and second molars Deep cavity in beaks prevents crown from being crushed

Read more less

The 52 Miller straight-cut bone file used for final smoothing and shaping of bone with 6.2mm and 4.8mm wide working ends. The 52 Miller straight-cut bone file is used for final smoothing and shaping of bone. Straight cut bone files reduces and smooths bone with only a pull stroke due to the parallel position of the cutting edges. The smaller working end is 4.8mm wide, and the larger end is 6.2mm wide. Made from surgical grade stainless steel.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Diamond Dusted 51 Root Forceps are used to extract upper roots. A light diamond coating allows for 20% greater grip as compared to traditional forceps. The light diamond coating increases resistance between the forceps and tooth surface providing enhanced engagement. Thin, tapered beak designs provide improved intraoral vision and access as compared to traditional forceps. Diamond Dusted Forceps have a matte finish for additional contrast and reduced light reflection. Their unique hole design reduces weight of the forceps, providing increased comfort and control. Laser marking on the hinge is visibility when bagged for sterilization.   Features Lifetime warranty against defects in material and workmanship Surgical grade stainless steel promotes longevity and corrosion resistance Straight, conical beaks designed to adapt to upper anterior incisors and canines

Read more less

Upper Roots Serrated Forceps used for extracting teeth from the alveolar bone. Extraction forceps are ideal for extracting teeth from the alveolar bone. All hinged instruments should be cleaned and sterilized in an open position.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Atraumair 51 Root Forceps are used to extract upper roots

Read more less

Tissue forceps/pliers used to grasp and stabilize soft tissue during suturing. 15mm

Read more less

Tissue forceps/pliers used to grasp and stabilize soft tissue during suturing.

Read more less

Used to hold mucoperiosteal flaps, cheeks, lips and tongue away from the surgical area.

Read more less

5.0 mm Osteotome used for lateral bone condensation for elevation of the sinus floor.

Read more less

5.0 mm Osteotome used for lateral bone condensation for elevation of the sinus floor. The angle assists with posterior access. Specially designed for closed sinus elevation operations in the lateral upper jaw region or in difficult-to-access maxillary areas.

Read more less

5.0 mm Osteotome used for the transport of bone. Designed to condense bone material and/or autogenous bone under the sinus. Minimizes the risk of perforation of the mucous membrane in sinus elevation procedures.

Read more less

5.0 mm Osteotome used to carry and place bone grafting material into site of the elevated sinus floor. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.

Read more less

5.0 mm Osteotome used to carry and place bone grafting material into site of the elevated sinus floor. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.

Read more less

5.0 mm Osteotome used to contense bone material under the sinus. Allows for the transport of bone graft chips from the implant cavity or for condensing them apically.

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas.

Read more less

Wagner Straight Standard Series scissors with 1 serrated blade used for trimming tissue or cutting sutures. 11.5cm Standard Series Scissors offer a wide array of cutting blades to fit a variety of needs.

Read more less

The 5 Round Scalpel Blade Handle is used for cutting gingival tissue and making surgical incisions. The 5 Round Scalpel Handle provides greater rotational movement with fingertip control and enhances dexterity. Handle measures 6" long. Compatible with standard scalpel blade sizes.

Read more less

Multipurpose instrument used to clamp off blood vessels, remove small root tips and grasp loose objects. Featuring 1x2 straight beaks.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less

Periosteal Elevators are designed for reflecting and retracting the mucoperiosteum after incisions of the gingival tissue. Hu-Friedy periosteal elevators are manufactured from stainless steel to exacting specifications to ensure optimal performance and l

Read more less

Luxating elevators have thin, sharp blades that are used to cut periodontal ligaments. The luxating elevator is used by rocking and cutting vs. an elevator that lifts and pries. Luxating elevators reduce putting pressure on adjacent teeth.

Read more less

Luxating elevators have thin, sharp blades that are used to cut periodontal ligaments. The luxating elevator is used by rocking and cutting vs. an elevator that lifts and pries. Luxating elevators reduce putting pressure on adjacent teeth.

Read more less

Delicate instruments for the removal of root tips in difficult-to-reach areas. The Heidbrink root tip picks are designed for delicate root teasing procedures.

Read more less

The 5 Gardner Bone Chisel is used to shave bone with a 4.3mm mono-bevel tip. The 5 Gardner Bone Chisel is used to shave bone with a 4.3mm mono-bevel tip. Made with surgical grade stainless steel.

Read more less

The 5 European Round Scalpel Blade Handle is used for cutting gingival tissue and making surgical incisions. The 5 European Round Scalpel Blade Handle is used for cutting gingival tissue and making surgical incisions. The round scalpel handle provides greater rotational movement with fingertip control and enhances dexterity. The #5 European Round Scalpel Blade handle features matte finished stainless steel. Compatible with standard scalpel blades.

Read more less

The 5 Double-Bladed Scalpel Handle is designed to remove palatal tissue to obtain a graft used for root coverage with 1.5mm between blades. The 5 Double-Bladed Scalpel Handle is designed to remove palatal tissue to obtain a graft used for root coverage with 1.5mm between blades. The position of the blades permits a parallel incision method to remove an exact amount of tissue in a minmal amount of time and with minimal discomfort to the patient. The round scalpel handle provides greater rotational movement with fingertip control and enhances dexterity. Compatible with standard scalpel blades.

Read more less

Side-cutting rongeurs used for trimming and recontouring alveolar bone and gross tissue removal.

Read more less

For severing the periodontal ligament.1.5mm All periosteals come with the handle shown unless additional options are listed.

Read more less

The 5 Offset Angle Scalpel handle design is ideal for posterior and palatal areas with a 30 degree angle. The 5 Offset Angle Scalpel handle design is ideal for posterior and palatal areas and provides greater rotational movement with fingertip control while enhancing dexterity. Handle is 5.8" long with a 30 degree angle. Compatible with standard scalpel blades.

Read more less

Used to loosen the tooth from the periodontal ligament and ease extraction.

Read more less